http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박슬기(Sulki Park),조형희(Hyung Hee Cho),송지운(Jiwoon Song) 한국추진공학회 2009 한국추진공학회 학술대회논문집 Vol.2009 No.5
본 연구에서는 플라즈마에 의한 초음속 유동장의 변화를 수치해석을 이용하여 분석하였다. 플라즈마의 방향을 유동에 평행한 방향과 가로지르는 방향 두 가지 경우에 대한 해석을 통하여 플라즈마가 초음속 유동장의 방향과 유동의 속도 변화에 주는 영향을 알아보았다. 해석 결과 전기장의 크기와 공간별 차이에 따라서 유동장의 방향 및 속도 변화가 다르게 나타났다. 전기장의 방향에 따라 전자가 유동장과 같은 방향으로 가속되는 경우 유동의 속도가 증가하였으며, 반대인 경우에는 유동의 속도가 감속된다는 것을 확인할 수 있었다. A numerical analysis of the effect of plasma on flow characteristics in supersonic flow is studied. It is shown that change of direction and velocity magnitude of flow is appeared different in relative direction of plasma and fluid flow. The case of that direction of electrons, which are same with flow direction, the flow is accelerated, and the case of opposition, the flow is decelerated.
송지운(Jiwoon Song),박슬기(Sulki Park),김태환(Tae Hwan Kim),조형희(Hyung Hee Cho) 한국추진공학회 2011 한국추진공학회 학술대회논문집 Vol.2011 No.5
본 연구에서는 후향계단 형상의 0.5 m/s의 속도를 갖는 유동을 DBD 플라즈마를 통해 제어하였다. electrode와 dieletric material로 각각 stainless foil과 polymide film을 사용하였으며, 고압의 AC power source를 사용하였다. 후향계단 전단과 수직 부분의 두 부분으로 나누어 각각 플라즈마를 발생시켰으며, 플라즈마 발생 위치에 따라서 유동의 재부착 지점이 변경됨을 확인 할 수 있었다. The effect of plasma on flow characteristics in subsonic flow in backward-facing step is studied. The velocty of main flows are 0.5 m/s. DBD plasma is using for flow control. Stainless foil and polymide films are used as an electrode and dielectric material. The change of flow characteristics are shown by different of plasma generation region in fluid flow.
배지열(Ji-Yeul Bae),박슬기(Sulki Park),김태환(Taehwan Kim),송지운(Jiwoon Song),함희철(Heecheol Ham),배주찬(Ju Chan Bae),조형희(Hyung Hee Cho) 한국추진공학회 2012 한국추진공학회 학술대회논문집 Vol.2012 No.11
로켓 설계에서 내열 설계는 공력 설계와 더불어 매우 중요하다. 내열 설계에 있어 노즐 표면에 임무 시간동안 노즐형상을 유지할 수 있는 내열재를 추가하게 되는데 이때 내열재의 추가는 시스템 중량을 상승시켜 성능 하락을 유발할 수 있다. 따라서 내열재를 적절하게 설계해 노즐에 적용하는 것이 중요한데 이를 위해서 내열재의 정확한 물성을 아는 것이 매우 중요하다. 이때 가장 중요한 물성이 열분해율을 결정하는 열반응상수와 활성화에너지이다. 따라서 본 연구에서는 탄소/페놀릭 내열재의 열반응상수를 측정하는 실험을 진행하였다. 아음속에서 소형 모터를 이용해 실험한 온도 분포로 열반응상수를 역으로 도출하였고 이는 선행 문헌의 결과와 유사하였다. In rocket design process, thermal design is one of the most important aspect. In order to protect nozzle, adequate amount of heat protection material is added to nozzle for required mission time. However adding heat protection material increase the system weight and reduce overall performance. Therefore optimization of heat protection material is important and it requires accurate properties of heat protection material. Among the properties of materials, kinetic constant and activation energy that govern decomposition process are the most important. Thus kinetic constant measurement is done with small test motor experiment in subsonic region.