http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
영구자석 이동형 선형 모터를 가진 초소형 공기베어링 스테이지
노승국(Seung-Kook Ro),박종권(Jong-Kweon Park) Korean Society for Precision Engineering 2007 한국정밀공학회지 Vol.24 No.8
In this paper, a new air bearing stage with magnetic preload and a linear motor has been developed for the small precision machine systems. The new air bearing stage is unique in the sense that permanent magnets attached bottom of the iron core of table are used not only for preloading air bearings in vertical direction but also for generating thrust force by current of the coil at base. The characteristics of air bearings using porous pads were analyzed with numerical method, and the magnetic circuit model was derived for linear motor for calculating required preload force and thrust force. A prototype of single axis miniature stage with size of 120(W)×120(L)×50(H) ㎣ was designed and fabricated and examined its performances, vertical stiffness, load capacity, thrust force and positioning resolution.
기업 합병을 통한 부동산 유형의 분산과 규모의 경제 효과 -미국 부동산 투자회사를 대상으로-
노승한 ( Seung Han Ro ) 한국부동산분석학회 2011 不動産學硏究 Vol.17 No.1
본 연구는 1996년부터 2008년까지 기업 합병을 경험한 104개의 미국 부동산 투자회사를 대상으로 기업 합병으로 발생한 부동산 유형의 분산이 이 회사들의``규모의 경제``에 어떠한 영향을 미치는가를 분석하였다. 금융 연구에서 파생된 합병에 관한 한 이론은 기업 합병에서 발생한 분산효과가 구매 기업의``규모의 경제``를 제약한다는 것으로, 합병 후 구매 기업에 나타나는 주식 시장에서의 가치 감소 현상을 설명한다. 이러한 이론을 바탕으로, 본 연구는 기업 합병으로 증가한 부동산 유형의 분산이 그 구매 부동산 투자 회사의``규모의 경제``를 감소시킬 것이라는 가설을 세우고 실증적 분석을 하였다. 이벤트 스터디 결과, 분산 증가에 따른 구매회사의 추가적인 가치 감소현상은 나타나지 않았다. 555개의 패널 데이터 분석을 통해``규모의 경제``를 기업 합병 전과 후로 비교하였을 때, 부동산 유형의 분산이 증가한 합병과 증가하지 않은 합병 모두,``규모의 경제``성장이 합병 후 나타났다. 그러나 합병 후 분산이 증가한 합병과 증가하지 않은 합병의 비교에서 통계적으로 유의한 수준의``규모의 경제``차이가 나타나지 않았다. 따라서 본 연구는 합병으로 증가한 부동산 유형의 분산이 그 구매 부동산 투자 회사의``규모의 경제``를 감소시키는 증거를 찾지 못했다. 이러한 결과는 구매 회사가 매각 되는 회사의 특화된 전문성의 확보를 통해 부정적인 분산 효과를 감소시킬 수 있다는 시각에 부합한다.
노승국(Seung-Kook Ro),김수현(Soohyun Kim),곽윤근(Yoonkeun Kwak),박천홍(Chun Hong Park) Korean Society for Precision Engineering 2013 한국정밀공학회지 Vol.30 No.12
In this paper, we proposed an air bearing stage with active magnetic preloads in vertical directions compensating motion errors and attenuating vibrations to improve dynamic characteristics. This preloaded design gives simpler configuration of the stage, and active control of preload can be used for compensating motion errors by feedforward method. To improve dynamic characteristics, vibration of the table is monitored by an accelerometer, and controlled by a DSP based digital controller with integrator and band pass filters for suppressing roll and pitch vibration modes. The modes were evaluated by measuring frequency response functions, and compared with compensated responses. This showed effective results for suppressing poorly damped regenerative vibration of air bearings.
진동 마이크로 밀링을 이용한 미세 반복 패턴 가공 기술 연구
노승국(Seung-Kook Ro),김경호(Gyungho Khim),박종권(Jong-Kweon Park) Korean Society for Precision Engineering 2014 한국정밀공학회지 Vol.31 No.5
This paper introduces a system to machine micro-sized patterns effectively on surface based on micro-milling process using tools with simultaneous rotation and oscillation, oscillation micro milling. To review the effectiveness of proposed concept, we integrated a micro-spindle supported by active magnetic bearings with a precision 3-axis air bearing stage using double-wedge mechanism, and tested this oscillation milling. Two types of oscillation milling were tested, which are linear oscillation milling with a flat end mill and elliptical oscillation milling with a ball end mill with 0.3 mm of diameter. The spindle was rotating 110 krpm and workpiece was moving constant speed of 2~8 mm/sec during the oscillation milling. As the results, multiple oval shape dimples were generated in regular spacing, and the variation of elliptical motion made different shapes of patterns. The results showed that proposed oscillation milling can be successfully used for machining repeated micro-patterns.