RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 음성지원유무
        • 원문제공처
          펼치기
        • 등재정보
          펼치기
        • 학술지명
          펼치기
        • 주제분류
          펼치기
        • 발행연도
          펼치기
        • 작성언어

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        대전 용산동 구석기유적 출토 슴베찌르개의 성격

        김환일(Kim Hwan il)(金煥逸) 중앙문화재연구원 2006 중앙고고연구 Vol.0 No.2

        슴베찌르개는 대전 용산동 구석기유적에서 가장 대표적인 석기로 2,200여 점의 석기 가운데 38점이 분류되었으며 연모의 대부분을 차지하고 있다. 이 글에서는 용산동구석기유적에서 출토된 슴베찌르개를 대상으로 하여 암질과 몸체의 선택, 크기에서 보이는 특정과 제작수법 깨진 상태 등의 속성에서 나타나는 특징을 살펴본 후, 이를 통하여 유적의 성격을 유추하여 보고자 하였다. 1점의 석영암 슴베 조각을 제외한 나머지 슴베찌르개는 모두 혼펠스 돌날로 제작되었다. 길이에 따라서는 두 개의 그룹으로 구분되어 기능의 분화 가능성을 생각해 볼 수 있으며, 슴베의 아래끝부분 너비도 뾰족한 형태와 넓은 것으로 구분되어 자루의 장착방법에 차이가 있었을 것으로 생각된다. 위끝부분의 각도는 중간각으로 이루어져 있다. 슴베찌르개의 도구축과 돌날격지의 타격축은 서로 반대방향을 이루는 것이 관찰되며, 돌날의 상태에 따라 두터운 부분을 슴베로 제작하였음을 알 수 있다. 슴베는 가파른 잔손질을 통하여 직선 또는 오목한 형태로 만들었으며, 1점만이 확인되었지만 슴베의 양쪽이 모두 흠날모양으로 제작된 것이 있어 독특한 형태로 주목된다. 위끝부분의 잔손질은 대부분 한쪽 가장자리에 가파른 각도로 이루어졌으며, 잔손질된 반대편 가장자리는 날카로운 자연날을 그대로 이용하였다. 대부분 완형의 슴베찌르개가 출토되는 다른 유적들과는 달리 용산동 구석기유적에서는 위끝·중간 또는 슴베부분 등이 절단된 상태로 출토된 것이 약 80%에 이른다. 슴베부분이 절단된 것이 가장 많이 나타나며, 단면은 연모 방향과 직각을 이루는 것이 대부분이다, 절단면의 특징으로 보아 제작과정보다는 연모의 사용 후 자루에서 해체하지 않고 유적으로 돌아왔음을 유추할 수 있으며, 용산동 구석기유적이 base camp로서의 기능을 가지고 있음을 알 수 있다. 슴베찌르개에서 나타나는 이러한 특징들은 절대연대측정값과 함께 유적을 이해하는 데에 있어 좋은 자료로 평가되며, 앞으로 슴베찌르개의 제작 및 사용실험이 충분히 이루어지면 좀더 구체적인 양상을 파악할 수 있을 것으로 기대한다. Yongsan-dong palaeolithic site is located near the Geum river basin and it was excavated twice between 2003 and 2005. Artifacts originating in one cultural layer of the upper paleolithic age is formed earlier than soil-wedge structure and shows comparatively stable space distribution aspect. Stone artifacts are mostly consisted of quartzite and homfels, and other kinds are rarely seen. Excavated artifacts are core, flake, blade, debris, pebble and tool, and tool included tanged point, scraper, awl, chopping-tool, polyhedron and so on. The tanged points from Yongsan-dong Palaeolithic site which were most representative tools, classified thirty-eight pieces, are composed of the most part of tools. This paper studied character of raw material, technique and broken condition through tanged points from Yongsan-dong Palaeolithic site, and guessed specific character of the site. Except for one quarzite tang, the rest of the tanged points were made of homfels. They were divided into two groups in accordance with the length, so we can think about possibility of the functional specialization. It is observed that morphological and debitage axis make the opposite direction. The proximal part and the breadth of tanged points were divided into the pointed and broad type, so we can guess there are differences of the method to attach to the shafts. According to the condition of blade, the tang was made of thick part of blade. The tang was formed into straight or concave type. Although only one item was excavated, it is unique that both side of tang was formed of notch shape. Most retouch of the distal part was made of blunt angle on the single edge. The oppsite edge of retouch used sharp natural edge as it is. Tanged points from Yongsan-dong Palaeolithic site which was excavated almost reached 80% as distal end, mesial part or haft was broken. The most of them was excavated as haft was broken. The cross section meet tool direction at right angles. It is analogized through aspects of cross section that the tanged points came back to the site after using as not dismantled from shafts. According to these aspects, we know Yongsan-dong Palaeolithic site proves the function of base camp. This character of tanged points are estimated good evidences with 14C age to understand the site. From now on, enough experiments of producing and using tanged points will provide us more specific information.

      • KCI등재

        아동기 외상 경험과 공감의 관계에서 애착의 매개효과 분석

        김환,한수미 한국상담학회 2017 상담학연구 Vol.18 No.6

        This study aimed to examine the relationship between early traumatic experiences and empathic ability. This study performed replication, in the existing researches explanatory power of the childhood trauma experience was low, and tried to verify that the attachment played role as a mediator in the procedure of traumatic experiences. In terms of empathic ability, it examined four factors which include perspective taking, empathic concern, empathic comprehension, and empathetic responding. 531 online college students answered the questionnaires consisting of Childhood Trauma Questionnaire(CTQ), Experiences in Close Relationships Scale-Revised(ECRS-R), Interpersonal Reactivity Index(IRI), Toronto Empathy Questionnaire(TEQ), and Barrett-Lennard Relationship Inventory-empathic understanding subscale(BLRI). Correlation analysis and regression analysis were performed on the data. As a result of correlation analysis, early traumatic experience showed the negative relationship with all empathy variables and anxious and avoidance attachment showed the negative relationship with empathy. Mediating effect of attachment which was presumed as a mediation variable was statistically significant. Unstable attachment completely mediated the effect of early traumatic experience on empathy. 김환과 한수미(2015)는 아동기 외상 경험과 공감능력 간의 관계를 조사하였다. 본 연구는 이를 반복 검증하였으며, 기존 연구에서 아동기 외상 경험의 설명력이 낮은 결과가 나타났는데, 이 과정에 애착이 매개역할을 할 것으로 보고 이를 검증하였다. 공감능력에 대해서는 기존 연구에서 살펴보았던 조망수용, 공감적 관심, 공감적 이해 외에 공감적 반응을 추가하여 살펴보았다. 531명의 온라인대학교 학생들에게 아동기 외상 질문지(Childhood Trauma Questionnaire: CTQ), 친밀관계경험 검사(Experiences in Close Relationships Scale-Revised: ECRS-R), 대인관계 반응성 지수(Interpersonal Reactivity Index: IRI), 토론토 정서공감 척도(Toronto Empathy Questionnaire: TEQ), 공감적 이해 소척도(Barrett-Lennard Relationship Inventory-empathic understanding)를 작성하도록 하였고, 수집한 자료를 활용하여 상관분석과 회귀분석을 통한 매개효과 분석을 시도하였다. 상관분석 결과, 아동기 외상 경험은 모든 공감 변인과 부적 상관을 보였으며, 불안애착과 회피애착 역시 공감과 부적 상관을 보였다. 매개변인으로 선정한 애착의 매개효과는 통계적으로 유의미하였으며, 불안정 애착 총점은 아동기 외상 경험이 공감에 미치는 영향을 완전 매개하였다.

      • KCI등재

        직접 압축성형된 인공 슬관절 경골 고평부용 초고분자량 폴리에틸렌의 마멸 특성 평가

        김환,이권용,이성재,김승수,선두훈,김용식,김병수,김정성 한국생체재료학회 2009 생체재료학회지 Vol.13 No.3

        The sliding wear behaviors of direct compression molded Ultra-High Molecular Weight Polyethylene (UHMWPE) disks against Co-Cr alloy pins were examined and compared with those of ram extruded and machined UHMWPE, which were used for the bearing tibial plateau of total knee replacements. Half of all UHMWPE disks were gamma irradiated and the last of them were non-gamma irradiated, and both group of UHMWPE disks were tested under contact pressure of 20MPa and 40MPa. All wear tests were conducted by using a Pin-on-Disk type wear tester with a line contact linear reciprocal sliding motion in bovine serum. For the non-gamma irradiated specimens, direct compression molded UHMWPE showed less wear than ram extruded and machined UHMWPE. For the gamma irradiated specimens, there was no significant difference in wear between direct compression molded UHMWPE and ram extruded and machined UHMWPE. This result is similar to other in-vitro wear test results, while there are controversies for other in-vivo wear results. Based on the results of this study, though there is no significant advance in wear resistance for the direct compression molded and gamma irradiated UHMWPE, this manufacturing method has potential to be used for the bearing tibial plateau of total knee replacements.

      • SCOPUSKCI등재

        직접 결합방법에 의한 Glass-Ceramics과 금속의 접합

        김환,이기강,Kim, Hwan,Lee, Ki-Kang 한국세라믹학회 1981 한국세라믹학회지 Vol.18 No.2

        Glass-ceramics possessed a number of characteristics which suggested their suggested their use for sealing to metals. The choice of particular glass-ceramics compositions for this application is governed by various factors, including workability of the glasses, thermal expansion characteristics and the matching of these to appropriate metals. Other properties, such as mechanical strength, determined the performance of glass-ceramics to metal seals. The purpose of the present study was to investigate direct sealing behaviour of copper to $Li_2O-ZnO-SiO_2$ system glass-ceramics. The design of the seal was a concentric seal which might contribute to the strong bond formation by providing compressive stress during thermal excursions. Tensile strengths of sealing layers were measured by Instron test machine. The layers were examined by electron probe microanalyzer. Crsystallization rate was increased with the amount of ZnO or $Li_2O$, and ZnO increased the sealing strength, but $Li_2O$ lowered it. Sealing mechanism was due to the formation of metal oxides, which acted as binder between copper and glass-ceramics. The nickle-plated copper seal with 10% $Li_2O$ and 30% ZnO was the most strong seal, and its sealing strength was more than 56kg/$\textrm{cm}^2$.

      • SCOPUSKCI등재

        부분 안정화 지르코니아의 파괴거동

        김환,임은극,고정하,황규홍,Kim, Hwan,Lim, Eung-Keuk,Koh, Jeong-Kyu,Hwang, Kyu-Hong 한국세라믹학회 1984 한국세라믹학회지 Vol.21 No.3

        The effect of tetragonal $ZrO_2$ phase on the mechanical behavior in 7 mole% calcia partially stabilized zirconia has been studied. The $ZrO_2$ powder containg 7 mole% CaO prepared by Hot Petroleum Drying Method calcined at 80$0^{\circ}C$ for 1 hour was nearly 100% tetragonal but as the calcining temperature increased certain amount of monoclinic phase appeared. The sintered specimen at 1$700^{\circ}C$ for 5 hours was aged at 130$0^{\circ}C$ for 0, 24, 48, 72 hours. X-ray diffraction data showed that in the aged specimen monoclinic tetragonal and cubic phase coexisted. The Kc value of aged specimen for 48 hr was about 4.5MN/m3/2 much greater than unaged sample. But aged for 72 hr the KiC value was decreased. The increasing of toughness in PSZ is based on the Stress-Induced Phase Transformation that is metastable tetra-gonal $ZrO_2$ changes t stable monoclinic phase within the stress field of crack and the mechanical fracture energy absorption is occured But in this case due to certain amount of tetragonal phase transformed to monoclinic phase during cooling the microcrack effect by transformation also considered. Trerefore both Stress-Induced Phase Transformation and inclusion induced microcracking effect contrbute to the increase of fracture toughness of 7 mole% CaO-$ZrO_2$ containing monoclinic and tetragnola phase simulataneously.

      • KCI등재

        요양시설 거주 노인의 운동 프로그램 효과 탐색을 위한 체계적 문헌고찰

        김환,손원호 한국스포츠학회 2022 한국스포츠학회지 Vol.20 No.3

        이 연구는 체계적 문헌고찰을 통해 국내 요양원의 노인 운동 프로그램의 효과를 분석하여 임상현장에서 심신기능을 향상시키기 위한 운동 프로그램을 효율적으로 운영할 수 있는 통합적인 근거를 마련하는 것을 목적으로 수행되었다. 연구의 목적을 달성하기 위해 국내 전자데이터베이스를 사용하여 노인장기요양보험제도가 시행된 2008년부터 2022년까지의 문헌을 검색하였고 정제과정을 통해 최종문헌을 선정하였다. 선정된 최종문헌을 바탕으로 범주화를 한 결과는 '신체조성', '운동기능', '인지기능', '정서기능'으로 분류되었고 이를 통해 내린 결론은 첫째, 시설노인을 대상으로 수행된 연구는 노인의 운동기능의 효과검증에 대한 연구가 가장 많은 것으로 나타났다. 둘째, 운동 프로그램이 적용된 시설노인은 치매환자가 가장 많은 것으로 나타났다. 셋째, 선행연구에서 적용된 운동 프로그램은 시설노인의 특성을 제대로 반영하지 못한 것으로 나타났다. 넷째, 노인장기요양보험제도와 운동 프로그램 간의 당위성을 확보한 연구가 미흡한 것으로 나타났다. 따라서 이 연구는 증가하는 시설노인에 따라 추후에 다양한 운동 프로그램을 개발하여 제공하는데 초석을 다지는 시도로써 후속 연구의 기초자료를 제공할 수 있을 것이다.

      • KCI등재

        의사소통 능력이 대인관계 적응에 미치는 영향에 있어서 공감의 매개효과

        김환,최혜라,한수미 한국웰니스학회 2022 한국웰니스학회지 Vol.17 No.1

        의사소통능력은 대인관계를 원활하게 하는 개인적인 강점임이 분명하지만, 공감이 결여된 능력이라면 대인관계 순기능은 제한적일 수 있다. 본 연구에서는 의사소통능력이 대인관계적응에 미치는 영향을 공감이 매개할 것으로 가정하고 매개 모형을 검증하였다. 총 311명의 온라인대학교 학생들에게 의사소통능력, 인지공감, 정서공감, 한국판 대인관계문제 검사를 실시하여 얻은 자료에 대하여 상관분석 및 회귀분석을 이용한 매개효과 검증을 수행하였다. 분석 결과, 의사소통능력, 공감, 대인관계 적응은 서로 정적 상관을 나타냈고, 의사소통능력이 대인관계 적응에 미치는 영향에서 공감의 매개효과를 확인할 수 있었다.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼