http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김준식,김홍숙,박남훈,김진업,권오준,Kim, Jun-Sik,Kim, Hong-Suk,Park, Nam-Hun,Kim, Jin-Eop,Gwon, O-Jun 한국전자통신연구원 2008 전자통신동향분석 Vol.23 No.3
SDR 기술은 다양한 무선통신 환경(다중모드, 다중표준, 다중대역, 다중기능)에 유연하게 개처하기 위하여 하나의 공통 하드웨어 사용자가 원하는 응용 소프트웨어(무선 프로토콜 규격)로 재구성할 수 있는 개방형 신호처리 기술이다. 그러므로 SDR은 이러한 이동통신시장의 변화에 적극적으로 대처하기 위한 핵심기술로써, 통신시장이 직면하고 있는 문제점을 해결할 수 있는 해결책 중의 하나로 고려되고 있다. 본 고에서는 SCA 기반 SDR 단말기 구현을 위해, 통신 애플리케이션 소프트웨어를 지원하는 하부 구조 관점에서 SCA Core Framework의 구조 및 기능을 기술하고, ETRI에서 SCA 2.2 규격을 준수하여 개발한 SCARLET 미들웨어 및 SDR 공용 단말 하드웨어를 소개하고, SCA 기반의 HSDPA/T-DMB 응용 컴포넌트 구현을 통한 실험 내용을 소개한다.
Ga 첨가물이 ZnO의 전기적, 광학적 특성에 미치는 영향
김준식,장건익,Kim, Jun-Sik,Jang, Gun-Eik 한국전기전자재료학회 2010 전기전자재료학회논문지 Vol.23 No.9
ZnO with the wide band gap near 3.37 eV is typically an n-type semiconductor in which deviation from stoichiometry is electrically active. It was known that the films with a resistivity of the order of $10^{-4}{\Omega}cm$ is not easy to obtain. In order to improve electrical characteristic of ZnO, we added 1, 3, 5 wt% Ga element in ZnO. The Ga-doped ZnO (GZO) was grown on a glass substrate by radio frequency (RF) magnetron sputtering at the temperature range from 100 to $500^{\circ}C$. X-ray diffraction (XRD) patterns of GZO films showed preferable crystal orientation of (002) plane. The lowest resistivity of the GZO films was $8.9{\times}10^{-4}{\Omega}cm$. GZO films significantly influenced by the working temperature. The average transmittance of the films was over 80% in the visible ranges.
CaF<sub>2</sub> 두께 변화에 따른 ZnS/CaF<sub>2</sub>/ZnS/Cu 다층 박막의 광특성
김준식,장건익,Kim, Jun-Sik,Jang, Gun-Eik 한국전기전자재료학회 2009 전기전자재료학회논문지 Vol.22 No.7
Layered ZnS/$CaF_2$/ZnS/Cu film was deposited on glass substrate by using evaporation method. ZnS and $CaF_2$ were chosen as high and low refractive materials. Cu was used as mid-reflective layer. Reflectance with different optical thickness of $CaF_2$ ranging from $0.25{\lambda}\;to\;0.5{\lambda}$ were systematically investigated by using spectrophotometer. In order to expect the experimental results, the simulation program, the Essential Macleod Program(EMP) was adopted and compared with the experimental data. Based on the results taken by spectrophotometer, the ZnS/$CaF_2$/ZnS/Cu multi-layered thin film show the maximum reflectance of 80% at 625nm $(0.25{\lambda}\;in\;CaF_2)$ and 42% at 660nm $(0.5{\lambda}\;in\;CaF_2)$ respectively. As compared with the experimental results and simulation data, it was confirmed the experimental data is well matched with the EMP data.
김준식,장건익,Kim, Jun-Sik,Jang, Gun-Eik 한국전기전자재료학회 2008 전기전자재료학회논문지 Vol.21 No.4
The optical properties of multi layered thin films with $Sb_2O_3/Na_3AlF_6/Sb_2O_3/Cr$ were simulated by using EMP(Essential Macleod Program). EMP is a comprehensive software package to design and analyse the optical characteristics of multi-layered thin film. $Sb_2O_3$ and $Na_3AlF_6$ were selected as a high refractive index and low refractive index material respectively. Additionally Cr was chosen as mid reflective material. Optical properties including color effect were systematically studied in terms of different optical thickness of low refractive index material. The optical thickness of $Na_3AlF_6$ was changed as 0.25, 0.5, 0.75 and $1.0\lambda$. The film with 0.25, 0.5, 0.75 and $1.0\lambda$ of optical thickness showed mixed color range between purple and red range, yellowish green and bluish green, purple and mixed color range of green and purple respectively.
김준식,장강재,장건익,Kim, Jun-Sik,Jang, Gang-Jae,Jang, Gun-Eik 한국전기전자재료학회 2008 전기전자재료학회논문지 Vol.21 No.7
Multi-layered thin films of $Fe_2O_3/Na_3AlF_6/Fe_2O_3/Cu$, Cr, Al were deposited on glass substrate by evaporation process. As high and low refractive index material, $Fe_2O_3$ and $Na_3AlF_6$ were selected and additionally Cu, Al and Cr were chosen as mid reflective layer respectively. Optical properties including reflectance were systematically studied depending on optical thickness of $Na_3AlF_6$ especially $0.25{\lambda}$ and $0.5{\lambda}$. In order to expect the experimental result, the simulation program, the Essential Macleod Program(EMP) was adopted and compared with the experimental data. Based on the results taken by spectrophotometer at viewing angle $45^{\circ}C$, the $Fe_2O_3/Na_3AlF_6/Fe_2O_3/Cu$ show the colour rage between red and orange in $0.25{\lambda}$ and green and pupple in $0.5{\lambda}$ respectively. When the Al was used as mid reflective layers in $Fe_2O_3/Na_3AlF_6/Fe_2O_3$ system, typical yellow colour and mixed colour between green and pupple were appeared in $0.25{\lambda}$ and $0.5{\lambda}$ of $Na_3AlF_6$ respectively. As compared the experimental result to simulation data, it was found out that the experimental data is relatively well matched with the EMP simulation data.
철골 및 PC 공사의 물류관리를 위한 문자 인식 기술의 적용성 검토
김준식,진상윤,윤수원,Kim, Jun-Sik,Chin, Sangyoon,Yoon, Su-Won 한국건설관리학회 2014 한국건설관리학회 논문집 Vol.15 No.4
건설 프로젝트가 대형화, 복잡화됨에 따라 건설 프로젝트에 투입되는 자재의 효과적 관리를 위하여, 바코드, RFID 등의 다양한 인식 기술의 적용이 시도되고 있다. 하지만 기존의 바코드, RFID 등의 기술의 적용은 기존 관리 업무에서 사용되지 않던 RFID 장비의 추가 투입과 부재 관리를 위한 RFID tag 부착 등의 추가 작업이 요구됨으로써, 공장 및 현장의 작업자들에게 관리 비용 증가, 추가 작업의 번거로움 등의 문제를 발생시키는 한계를 가지고 있었다. 또한 해당 장치를 인식하기 위한 별도의 RFID 리더를 소지하지 않는 경우, 해당 부재를 작업자가 해당 부재의 정보를 인식하기 어려운 한계를 가지고 있다. 따라서 본 연구에서는 Long-lead item 자재 중 철골과 PC 부재를 대상으로, 앞 서 제기된 문제점 개선을 위해 스마트 폰 등의 영상처리 기능을 이용한 문자인식 기술을 대체 기술로 제안하고, 제안된 문자인식 기술의 적용 가능성 테스트를 통해 기술의 적용가능성을 제시하였다. 또한 제안된 문자인식 기술을 보다 효과적으로 적용하기 위한 문자 표기 방식, 코드 체계를 제안하고, 기존 RFID 기반 물류 관리 프로세스와 비교를 통해 문자인식 기술이 실제 적용될 경우의 효과를 제시하였다. As construction projects increase their complexity, variety, and scale, various recognition applications (such as RFID, bar-code etc.) have been tried for managing material effectively in construction projects. However, existing recognition applications for construction material management have some limitations that cause additional works (such as attaching RFID tag), additional cost (labor cost, recognition device cost, etc.), and cognitive impairment of workers. Therefore, this study proposed a character recognition technology as an alternative of previous recognition technologies such as RFID, bar-code, etc. The technical feasibility of proposed technology was validated by three recognition tests. Additionally, this study proposed code the structure to manage materials using the character recognition technology. The effects of character recognition technology are presented by comparing with existing RFID-based logistics processes.
김준식,오준호,Kim, Jun-Sik,O, Jun-Ho 대한기계학회 1996 大韓機械學會論文集A Vol.20 No.9
When modeling error is large of plant is time-varying, it is hard to obtain good robust performance and robust stability by conventional contorl methods. Here, we need to design a robust controller bearing modeling error. In this paper, based on recently developed Time Delay Control(TDC) and Disturbance Observer the output feedback Robust Disturbance Observer(RDO), which is easily combined with general linear control, is proposed. Proposed RDO is derived from extending the main idea of Disturbance Observer to multi-input multi-output linear system. RDO solves robust stability problem of Disturbance Observer and has the robust performance same as nominal performance. RDO controlled dual stage positioning system shows excellent robust performance.
스테레오 비젼을 이용한 BGA 소자의 볼 높이 측정 알고리즘에 관한 연구
김준식,박영순,Kim, Joon-Seek,Park, Young-Soon 한국조명전기설비학회 2006 조명·전기설비학회논문지 Vol.20 No.6
본 논문에서는 고 해상도의 CCD카메라를 이용하여 정밀 소자인 BGA(Ball Grid Array)의 2차원 영상을 얻어 BGA소자의 볼 높이 결함을 검출하기 위한 스테레오 영상 모델링 기법에 관하여 연구하고 결함 검출 알고리즘을 제안한다. 논문에서 BGA 소자의 패키지/볼 영역 검출 알고리즘, FOV 조정(calibration), 정점 정합 알고리즘과 높이 측정 방법을 제안한다. 각각의 BGA소자의 결함에 따른 검출 방법을 제안하고 실험을 통해서 성능을 검증하였다. In this paper, We proposed he algorithm for defect extraction and a study of the stereo image modeling o inspect defect for the ball height of BGA(ball grid way) device using 2-dimensional images captured by the BGA device of using the high resolution CCD cameras. This paper propose the package/ball area extraction of BGA device part, the FOV(field of view) calibration part, the top point matching part, and ball height measurement method. Each BGA device propose extraction method by defect, Through the experiment, we verified the result.