Alloy 600 노즐관통부의 이종금속용접 잔류응력에 따른 응력부식균열 거동 분석

김성우,김홍표,김동진,정재욱,장윤석,Kim, Sung-Woo,Kim, Hong-Pyo,Kim, Dong-Jin,Jeong, Jae-Uk,Chang, Yoon-Suk 한국압력기기공학회 2010 한국압력기기공학회 논문집 Vol.6 No.2

This work is concerned with the analysis of stress corrosion cracking(SCC) behavior of Alloy 600 nozzle penetration mock-up according to a residual stress induced by a dissimilar metal welding(DMW) in a nuclear reactor pressure vessel. The effects of the dimension and materials of the nozzle penetration on the deformation and the residual stress induced by DMW were investigated using a finite element analysis(FEA). The inner diameter(ID) change of the nozzle by DMW and its dependance on the design variables, calculated by FEA, were well consistent with those measured from the mock-up. Accelerated SCC tests were performed for three mock-ups with different wall thicknesses in a highly acidic solution to investigate mainly the effect of the residual stress on the SCC behavior of Alloy 600 nozzle. From a destructive examination of the mock-up after the tests, the SCC behavior of the nozzle was fairly related with the residual stress induced by DMW : axial cracks were found in the ID surface of the nozzle within the J-weld region where the highest tensile hoop stress was predicted by FEA, while circumferential cracks were observed beyond both J-weld root and toe where the highest tensile axial stress was expected.

항공 통신, 항법, 식별장비 시험평가

김성우,김민수,이영식,이병화,오우섭,Kim, Sung Woo,Kim, Min Su,Lee, Young Sik,Lee, Byoung Hwa,Oh, Woo Seop 한국군사과학기술학회 2012 한국군사과학기술학회지 Vol.15 No.5

Airborne radio communications, navigation, and identification equipments are the basic equipment of airplane. Airborne radio communications, navigation, and identification equipments are characterized by user's many quantitative and qualitative requirements. These equipment look like simple test and evaluation, but they have many complex factors. This paper describe the test and evaluation of airborne radio communications, navigation, and identification equipments.

한국형 공격헬기 임무탑재장비 구조도 개념 연구

김성우,김명진,오우섭,이종훈,임종봉,Kim, Sung-Woo,Kim, Myung-Chin,Oh, Woo-Seop,Lee, Jong-Hoon,Yim, Jong-Bong 한국군사과학기술학회 2011 한국군사과학기술학회지 Vol.14 No.4

The importance of avionics systems has increased to a significant level in modern aircraft development. Modern avionics system is a complex integrated system of state-of-art hardware and software technology. Specifying the avionics system architecture is the most important task throughout the avionics system design process. This paper reviews modern avionics system architectures and proposes an effective avionics architecture suitable for modern attack helicopters.

19세기 초반 노상추(盧尙樞)의 백운동 별업(別業) 조성과 경영

김성우(Kim Sung-woo) 한국역사연구회 2010 역사와 현실 Vol.- No.78

The subject of this article is a historical figure, Roh Sang-chu (1746-1829). After ending his 28-year-long bureaucratic career as the associate commander at Gadeuk Naval Fort in 1813, he started a typical life of a rural yangban in his home town, Seonsan, Gyeongsang-do province for 17 years until his death in 1829. The most notable feature that involved the latter years of his life at hometown was the creation of the Baeg'un-dong manor ("byeol'eop"). He started creating the manor in 1814 and dedicated himself to developing it as a mean for economic development and social stability of the village, until his death there after a long illness. It is the locale of Baeg'un-dong that this research pays the greatest attention to. It was a border village under the jurisdiction of Dogae-myeon, Seonsan prefecture in the Joseon dynasty. As a border village, it was much closer to Bian prefecture than to Seonsan. For this reason, Baeg'un-dong now belongs to Uiseong County. The fact that it was alienated from the Seonsan prefecture, in spite of its belonging to the prefecture, is the most crucial factor which determined the historical-geographical character of the village. It was for this reason that Roh Sang-chu made efforts to build a shelter for illegitimate descendants there. He had an illegitimate son, Roh Seung-yeop(1796-1842). Roh Seung-yeop and his descendants led a socio-economically stable life under the guardianship of Roh Sang-chu, who acted as a patriarch of the manor. But their stable life began to derail after the death of Roh Sang-chu, due to their disadvantageous social status as 'illegitimates.' In the course of the downfall, the second and third generation of descendants of Roh Seung-yeop had to earn their lives as hired hands or loggers, leading a hard life in a small, secluded area inside Hwa'rim, village for the legitimate descendants of Roh's lineage. It testifies to the fact that the illegitimates were given little opportunities for their social activities during Joseon dynasty. Given this social background of Joseon dynasty, Roh Sang-chu s experimentation to create a manor for the illegitimate descendants had to end with incomplete success.

조직효과성의 이론적 고찰(군사보안 담당자 평가를 위한 지표개발)

김성우,Kim, Sung Woo 한국융합보안학회 2015 융합보안 논문지 Vol.15 No.3_2

When we estimate any organization, we can use scientific tool such as organizational effectiveness. It is very difficult to know the level of organizational goal. If you plan how to assess the effectiveness of your organization, It is a complex and difficult problem, because a few social scientist think that there are many point of view of an concept of organizational goals based on the relatively concrete concept of organizational effectiveness. Social scientist Campbell insist that it is impossible to estimate organizational effectiveness accurately. So we should develope the perfect method to measure the organization as a system, the member's self satisfaction, the efficiency of the team. To achieve a good organizational effectiveness, we should study the method of approach about organizational effectiveness. This is theoretical study and show that the concept and method of approach about organizational effectiveness. 군사조직 중 보안을 책임지고 있는 개인과 집단에 대한 조직의 효과성을 평가하는 것은 군 전투력 유지와 밀접한 관계가 있다. 조직효과성은 조직이론 및 관리에서 아주 중요한 내용이며 많은 사람들이 연구 테마로 삼고 있으며 조직을 진단하는 기준이며 평가 척도로 활용하고 있다. 조직을 효율적으로 운용하기 위한 평가나 지표를 활용하기 위해서 현재 우리가 활용하고 있는 조직 효과성이란 개념을 지속적으로 발전시켜야 한다. 조직을 평가하기 위해서는 평가는 윤곽과 틀이 요구되는데 이를 위해 효과성을 정형화하고 개념화시켜야 한다. 다양한 조직에 대한 효과성을 분석하기 위해서는 누구를 어떤 도구를 사용해서 평가할 것인가를 결정하는 것이 중요하다. 이를 위해 조직에 대한 효과성을 분석하기 위한 접근방법 이론들이 객관화되고 구체화되어야 한다. 이 논문에서는 조직의 효과성에 관련된 접근 방법론에 대한 이론적 근거를 정리하고자 하였다.

Measurement of Electron Beam Output for the Prototype Compact Linac

김성우,강상구,이동주,임희진,이만우,이준규,이무진,양광모,노태익,정동혁,Kim, Sung-Woo,Kang, Sang Koo,Rhee, Dong Joo,Lim, Heuijin,Lee, Manwoo,Yi, Jungyu,Lee, Mujin,Yang, Kwangmo,Ro, Tae Ik,Jeong, Dong Hyeok Korean Society of Medical Physics 2015 의학물리 Vol.26 No.1

The C-band compact linear accelerator (linac) is being developed at Dongnam Institute of radiological & Medical Sciences (DIRAMS) for medical and industrial applications. This paper was focused on the output measurement of the electron beam generated from the prototype electron linac. The dose rate was measured in unit of cGy/min per unit pulse frequency according to the IAEA TRS-398 protocol. Exradin-A10 Markus type plane parallel chamber used for the measurement was calibrated in terms of dose to water at the reference depth in water. The beam quality index ($R_{50}$) was determined by the radiochromic film with a solid water phantom approximately due to low energy electrons. As a result, the determined electron beam output was $17.0cGy/(min{\cdot}Hz$. The results were used to monitor the accelerator performance during the development procedure. 의료용 및 산업용으로 활용하기 위한 C-밴드형 콤팩트 선형가속기의 개발이 동남권원자력의학원에서 진행되고 있다. 본 논문에서는 선형가속기 시작품에서 발생한 전자빔의 출력 측정 결과를 보고하고자 한다. 출력 측정은 물흡수선량에 대해 교정된 Exradin-A10 마커스형 평행평판형 전리함을 사용하여 물속 기준 깊이에서 IAEA TRS-398 프로토콜에 따라 흡수선량율을 결정하는 과정으로 진행되었다. 전자선 에너지가 낮은 점으로 인하여 선질지표($R_{50}$)은 필름 측정법을 써서 근사적으로 결정하였다. 결과로서 단위 펄스 진동수당의 선형가속기 전자빔의 출력은 $17.0cGy/(min{\cdot}Hz$로 나타났다. 본 연구의 결과는 개발 중인 전자가속기의 성능 평가 자료로 활용될 것이다.

주택의 배치 및 평면의 변화를 중심으로 본 재래식 농촌주택의 근대화 과정에 관한 연구 - 경기도 용인군 용인읍 삼가 1,3리 마을 주택을 중심으로 -

김성우,이유미,Kim, Sung Woo,Lee, You Mee 한국건축역사학회 1995 건축역사연구 Vol.4 No.1

The study is about the process of modernization of conventional rural houses in Kyung-gi province. It alms to identify the pattern of change, particularly focusing on the changes of the site plan and plan. The site of study is Samga Village, in YongIn County, near Seoul. The study discusses the process of modernization during the three decades from 1960 to 1980. The basic information was obtained through field research and site analysis, and the study relies predominatly on observational and statistical analysis. Four developmental stages can be clearly identified which are ; (1) Traditional type, (2)Modified-traditional type, (3) Saemaul type, and (4) The type of urban houses. The analysis was done through identification of changing site plan and plan. It is interesting to note that the changes of these elements show a certain pattern of sequential steps which also can be classified according to the four developmental stages mentioned above. The pattern of site design was consistantly maintained while plan and building system became very different However, the process of modernization of Korean rural houses was the process of producing a certain type of architecture that is not universal but uniquely Korean.

기동헬기 측면항법 알고리즘 구현 및 검증

김성우,고은경,Kim, Sung-woo,Go, Eun-kyoung 한국정보통신학회 2018 한국정보통신학회논문지 Vol.22 No.2

본 논문은 비행제어 비행체 관리 시스템 대신 한국형 기동헬기 임무컴퓨터의 비행운용 프로그램에서 구현한 측면 항법 알고리즘 설계 및 검증에 대하여 기술하였다. 구현된 측면항법 기능은 비행제어 시스템으로 롤 명령을 보내고 롤 명령 값은 임무컴퓨터의 제어 알고리즘에서 계산한다. 임무컴퓨터에서 제어 알고리즘 계산 시 항공기의 자세 및 위치에 대한 측정값을 이용한다. 이 입력 값들을 이용하여 임무컴퓨터에 탑재된 비행운용 프로그램은(선택한 비행계획 등)항법 요구를 롤 명령으로 자동조종으로 보낸다. 체계통합리그에서의 통합시험, 지상 및 비행시험을 통해 측면 항법 알고리즘을 검증하였다. This paper describe the Lateral Navigation algorithm design and verification that implementation on Mission Computer's OFP for Korean Utility Helicopter(KUH) instead of Auto Flight Control System(AFCS) Vehicle Management System. The LNAV function transmits Roll command into the AFCS System. The Roll command value will be calculated by control algorithms in MC. The Operational Flight Program(OFP) shall use for its calculations different measurements of the aircraft's attitude and place. Using these inputs, the OFP will translate a navigational demand(for example-to perform the selected flight plan) into Roll commands to the autopilot. By conducting integration test using SIL and ground test, flight test, it is confirmed that the introduced algorithm meets the requirements of the Mission Equipment Package(MEP) system. LNAV function is verified through the System Integration Laboratory(SIL) test, ground and flight test.

한국형 기동헬기 임무탑재장비체계 설계 및 입증

김성우,이병화,유연운,이종훈,임종봉,Kim, Sung-Woo,Lee, Byoung-Hwa,Yu, Yeon-Woon,Lee, Jong-Hoon,Yim, Jong-Bong 한국군사과학기술학회 2011 한국군사과학기술학회지 Vol.14 No.3

Mission Equipment Package(MEP) system is a collection of avionic components that are integrated to perform the mission of the Korean Utility Helicopter(KUH). MEP system development is classified mission-critical embedded system but KUH MEP system developed including flight-critical data implementation. It is important to establish the good development and verification process for the successful system development. This paper describe the development and verification process in each phase for the KUH MEP system. MEP system design is verified through the qualification test, system failure test and compatibility test in System Integration Laboratory(SIL).

통일신라시대(統一新羅時代) 불교건축(佛敎建築)의 변화(變化)

김성우,Kim, Sung-Woo 한국건축역사학회 1992 건축역사연구 Vol.1 No.2

The development of Buddhist architectures of the Unified Silla period have been generally understood to have paired pagoda instead of one which had been popular until before the unification. Besides the stylistic categorization of paired pagoda system, there had been no further investigation reported concerning whether there was any detailed process of change within the development of paired pagoda style. This paper aims to identify such change inside the development of paired pagoda style, which, externally, seems to be the same pattern of site design maintained throughout the period of Unified Silla that lasted for about three centuries. Since the temple sites of study are in the same pattern of layout, the method of investigation has to be such that can identify the subtle changes that, in external appearance, are not easily discernible. Hence, this research compared the dimensions of important measurement of five temple sites to be able to clarify the process of minor changes. Among many sites of Silla temples, only five were suitable for the research since detailed measurement were possible through field research or the report of excavation. They are the sites of Sachonwang-sa, Mangduk-sa, site of Kunsuri, and Bulguk-sa. Although the five sites have the same style of paired pagoda, it is clear that there were consistant flow of change. Even though the motivation of such change were not strong enough to change the site pattern itself, it resulted continuous minor changes such as the size and location of architectures. The size of image hall, for example, was growing larger and larger as time goes on, while, the size of Pagoda was getting smaller. In the same way, the size of middle gate became smaller while the size of lecture hall became larger, although the rate of change in these cases were not as severe as that of image hall and pagoda. At the same time, pagoda was coming closer to the middle gate leaving larger space in front of the image hall. Such aspect is even more meaningful considering the fact that the pagoda, from the 8th century in Japan and China, moved outside of the major precinct. The image hall, too, moved toward the middle gate slightly so that the space in front of the lecture hall became more spacious. Such changes, of course, were not accidental but they are the same continuous motivation of change that caused the changes before the period of unification. Enlargement of image hall and reduction of pagoda, for example, represent the changing relative importance of religious meaning. Hence, it is evident that one can not easily imterprete the development of one style only by categorizing it to be one same style. In the veiwpoint of the underlying motivation of change, the fact that one style persisted for a certain period of time, does not mean there had been no change, but means that it was the time of motivational accumulation, causing minor changes within the same style, to be able to create major change coming after.