http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김길정,손종식,류우석,Kim, Kil-Jeong,Shon, Jong-Sik,Ryu, Woo-Seog 한국방사성폐기물학회 2007 방사성폐기물학회지 Vol.5 No.3
Fenton's reagent is applied to directly decompose the ion-exchange resins, IRN-78 and the mixed resin with IRN-77. The newly applied procedures is to dry the resin first and the catalyst solution is completely absorbed into the resin, then a limited dose of $H_2O_2$ is introduced for an effective reaction between the reagents within the resin. As a characteristic on the decomposition of IRN-78, the resin mixture should be heated to $40^{\circ}C$ to induce the initial reaction and lag time is also needed for about 20 minutes until the main reaction occurs. The effectiveness of the decomposition is investigated using $CuSO_4,\;Cu(NO_3)_2\;and\;FeSO_4$ as a catalyst and the decomposition rate is compared depending on the concentration of each catalyst and the amount of $H_2O_2$. The most effective catalyst was found to be $FeSO_4$ for IRN-78 alone and the mixed resin with IRN-77, and $FeSO_4$ showed a special effect that the reaction was initiated without heating and a lag time. Furthermore, the optimum concentration of the catalyst for each resin and the mixed one is suggested in the view point of the amount of $H_2O_2$ needed and the stability of the decomposition reaction.
하수처리장 바이오가스 플랜트의 가스엔진 최적 운영 방안
김길정,김래현 한국에너지학회 2019 에너지공학 Vol.28 No.2
한국지역난방공사에서 난지 물재생센터의 하수처리 설비로 부터 발생하는 45,300 m3/일의 바이오가스를 연료로1,500 kW, 2대 규모의 엔진 발전기를 운영하고 있다. 그러나 바이오가스 발전 플랜트의 실제 운영 경험이 미미하고, 축적된 기술 및 노하우 부족으로 가스엔진의 잦은 고장과 정지로 많은 경제적 손실이 발생하고 있다. 따라서이 발전 플랜트의 안정적인 운영을 위한 기술적 근본 대책 마련이 필요한 실정이다본 연구에서는 난지 물재생센터의 하수처리장에서 발생하는 바이오가스를 이용한 가스엔진 플랜트의 일련의공정상의 문제점을 확인하고, 각 단계별 문제점을 최소화 하여 실제 운전의 최적화 방안을 마련하였다. 먼저 고장정지의 주요 원인인 발생가스의 정제를 위해 현재 사용 중인 활성탄에 대한 성분분석 및 흡착실험을 통해 활성탄의흡착능력 품질 기준 마련을 위한 여건을 조성하였다. 또한, 불순물을 최소화하기 위한 활성탄의 교체주기의 기준수립, 황화수소 측정주기 강화, 활성탄 국산화, 설비개선 등 바이오플랜트 운영기준 강화 및 개선방안을 적용하여실제운전에 적용하였다. 그 결과 가스엔진 1호기는 530%, 2호기는 250%의 정상운전 가동시간이 증가되는 운영실적을 보였다. 또한통풍구의 설비개선을 통해 작업공정을 줄이고, 정상 운전시간과 가동률을 높일 수 있었다. 경제적으로도 77,000천원/년의 매출증대 효과를 나타냈다, 이와 같이 운영기준의 강화 및 개선방안을 적용하여, 바이오가스 플랜트의고장 정지를 줄이고 가동률을 높여, 안정적인 운영을 하는 것이 현실적인 바이오가스 플랜트의 최적 운영방안으로판단된다.
다이포실 분말수지의 비드화에 의한 우라늄 제거특성 개선
김길정,손종식,홍권표,Kim Kil-Jeong,Shon Jong-Sik,Hong Kwon-Pyo 한국방사성폐기물학회 2006 방사성폐기물학회지 Vol.4 No.2
Chemical wastes containing small amounts of uranium can not be disposed of them after treatment as an industrial waste, because the uranium concentration in the final dry cake exceeds the exemption level. Especially for the removal of uranium in this study, the method for immobilizing Diphosil powder within alginate beads is adopted to make a bead form from a powdered resin. Sodium alginate bead itself showed a capability to uptake uranium to above 60%, but the value was decreased to below 30% after equilibrium. The adsorption rate of uranium increased with the increasing content of Diphosil in the sodium alginate bead. Diphosil resin itself showed very fast uptake of uranium from early stages, and then the rates were leveled off. Diphosil bead showed an improved capability to uptake uranium considering the pure Diphosil content in the composite bead, and provide a considerable potential for further applications of a continuous process by using Diphosil as a bead form.
김길정,손종식,류우석,Kim, Kil-Jeong,Shon, Jong-Sik,Ryu, Woo-Seog 한국방사성폐기물학회 2007 방사성폐기물학회지 Vol.5 No.1
Fenton's Reagent is applied to directly dissolve the cation-exchange resin, IRN-77. The characteristics of the experimental procedure is to dry the resin first and $FeSO_4$ solution is completely absorbed into the resin, and then $H_2O_2$ is introduced later for an effective reaction between the reagents within the resin. An a characteristic of the dissolution, the lag time is needed for about 1 hour until the main reaction is occurred, which was more affected with the less concentration of $FeSO_4$ and the less initial dose of $H_2O_2$. The dose of $H_2O_2$ was equally divided into the early stage and the later stage after the initial reaction to provide an effective and safe reaction condition. The optimum conditions is appeared that the concentration of $FeSO_4$ is 0.9M and the dose of 15% $H_2O_2$ solution is 6-7 volume for the dissolution of unit weight of IRN-77. The effect of the heating on the lag time was checked and the time could be reduced within 5 minutes at $50^{\circ}C$, which is a relatively low temperature. The large amount of the resin, 5g and 10g, was also completely decomposed by increasing the dose of $H_2O_2$ to 9-10 volume ratio.
김길정,손종식,홍권표,Kim Kil-Jeong,Shon Jong-Sik,Hong Kwon-Pyo 한국방사성폐기물학회 2006 방사성폐기물학회지 Vol.4 No.2
Chemical wastes are generated from nuclear facilities and R&D laboratories, but the uranium concentration in the final dried cake is evaluated into 11.2 Bq/g, which exceeds the exemption level of 10 Bq/g for each U isotopes, so the cake is categorized into a radioactive waste. Acid dissolution was applied to extract uranium from the waste sludge, and uranium adsorption on the dissolved solution was experimented by using IRN-77 and Diphosil bead. A large amount of resin was required to get above 80% of uranium removal, which was found to be due to a large amount of metal ions simultaneously dissolved from the precipitates with uranium. As an alternative method, acid dissolution is applied to the dewatered wet cake of the sludge, and the natural evaporation method is adopted for the dissolved solution. The uranium concentration of the dissolved solution was estimated to be 6.97E-01 Bq/ml, and the specific activity of the final waste sheets is evaluated to be 4.3 Bq/g. These results lead to the suggestion that the application of acid dissolution to the wet cake and the natural evaporation for the dissolved solution is an effective treatment method for chemical wastes containing uranium.