국내 작물모형의 개발 및 활용

김광수,김수옥,김준환,문경환,신재훈,조재일,Kim, Kwang Soo,Kim, Soo-Ock,Kim, Jun Hwan,Moon, Kyung Hwan,Shin, Jae Hoon,Cho, Jaeil 한국농림기상학회 2018 한국농림기상학회지 Vol.20 No.2

지방자치단체 지리정보시스템에서 재사용을 위한 응용 서비스 컴포넌트의 설계 및 구현

김광수,조대수,김도현,최혜옥,Kim, Kwang-Soo,Cho, Dae-Soo,Kim, Do-Hyun,Choi, Hae-Ock 한국공간정보학회 2001 개방형지리정보시스템학회 논문지 = Journal of the Korea Open Geogr Vol.3 No.1

컴포넌트 소프트웨어의 가장 큰 장점은 응용 소프트웨어사이의 컴포넌트 재사용이다. 본 논문에서는 컴포넌트 재사용의 장점을 지리정보시스템 분야에 접목하여 지방자치단체에서 지리정보시스템을 빠르고 효과적으로 구축하기 위한 컴포넌트의 설계와 구현 방법을 설명하였다. 구현된 컴포넌트는 응용 서비스 컴포넌트로 부산시에서 1999년도에 수행한 사업과 1999년과 2000년에 개방형 GIS 컴포넌트 S/W 개발 과제의 결과물을 기반으로 지방자치단체에서 수행하는 서로 다른 업무 사이에 공통적으로 적용 가능한 기능을 도출하여 구현하였다. 분석 대상이 된 업무는 지방자치단체에서 지리정보시스템으로 구축하는 빈도가 높은 상수도관리 업무, 하수도 관리 업무, 도로 관리 업무, 도시 계획 업무, 지적 관리 업무이다. 분석 과정을 통하여 5개의 업무들 사이에 11개의 공통 기능을 추출하였으며 이 중 7개의 기능을 5개의 응용 서비스 컴포넌트로 구현하였다. 구현된 컴포넌트는 Authority, GISReport, MapService, SymbolManager, AttributeDisplay등 5개로써 사용자 관리, 측정, 검색, 출력, 인덱스 창, 심볼 관리, 속성 정보 표현, 출력 등의 기능을 수행한다. The advantages of using components result from their reusability between applications. Applications can be easily implemented by adding components. In this paper, we described the design and implementation process of ASC(Application Service Component) for component-based GIS applications. In our project, there are 5 applications : Road Facility Management, Urban Planning, Cadastral Map Management, Water Supply Management, and Sewerage Management. All of them use MapBase component which supports common GIS functionality. Although they are different applications, some parts of them are same. We analyzed the developed results in 1st and 2nd year, and the achievement of UIS(Urban Information System) project in Busan Metro City in Korea. The UIS of Busan was consisted of 5 applications to equal with our project. Then, we extracted 11 common used components between 5 applications, and implemented 5 common components of them and 2 additional components. They were Authority, GISReport, IndexMap, Measurement, Search, Symbol Manager, and Attribute Display. As we offered them to companies developing application components, they were able to reduce the development time.

농림생태계 지속가능성 제고를 위한 농림기상학의 도전과 과제

김광수,문경환,천정화,김준환,강민석,김대준,Kim, Kwang Soo,Moon, Kyung Hwan,Chun, Junghwa,Kim, Junhwan,Kang, Minseok,Kim, Dae-Jun 한국농림기상학회 2019 한국농림기상학회지 Vol.21 No.3

일방향 복합재료 Single Lap접합 조인트의 파손 모드 및 강도 I. 실험

김광수,유재석,안재모,장영순,Kim Kwang-Soo,Yoo Jae-Seok,An Jae-Mo,Jang Young-Soon 한국복합재료학회 2004 Composites research Vol.17 No.6

본 연구에서는 몇 가지 접합 방법에 따라 일방향 복합재료 단일 겹치기 접합 조인트의 파손 과정, 모드 및 강도를 실험적으로 평가하였다 접합 방법으로는 접착제 없는 동시성형, 접착제를 사용한 동시성형 및 이차 접합의 세 가지를 고려하였다 또한 이차 접합 조인트에서 몇 가지 파라미터의 영향도 살펴보았다. 접착제 없는 동시성형 시편은 가장 우수한 조인트 강도를 나타내었다. 이차접합 조인트에서는 접착제 층의 점진적인 파손이 발생하였다. 접착제의 재료 및 접합 강도가 상대적으로 강한 필름 접착제의 동시성형 조인트는 갑작스런 층간분리 파손이 발생하였으며 이차 접합 조인트보다 더 낮은 파손 강도를 나타내었다. 이차 집합 조인트에서 층간분리 파손이 발생하지 않은 것은 접착제 층에서의 균열 진전 및 점진적 파손이 층간분리 파손을 방지한 것으로 보인다. 따라서 복합재료 접합 조인트의 파손 강도는 접착제의 재료 강도 또는 접착 성능과 항상 비례하지 않으며 이것은 복합재료가 층간 분리 파손에 약하기 때문이다. Failure process, mode and strength of unidirectional composite single lap bonded joints were investigated experimentally with respect to bonding methods, those are, co-curing with and without adhesive and secondary bonding. The co-cured joint specimens without adhesive had the largest failure strength. Progressive failures along the adhesive layer occurred in the secondary bonded specimens. In the co-cured specimens with adhesive film which had better material strength and adhesion performance, delamination failure occurred and the joint strengths were less than those of secondary bonded specimens. Delamination failure did not occur in the secondary bonded specimens because of earlier crack growth and progressive failure in the adhesive layer. Therefore, failure strength of composite bonded Joints were not always proportionate to material strength and adhesion performance of the adhesive due to the weakness of delamination in composite materials. The effects of surface roughness, bondline thickness and fillets were also studied on secondary bonded specimens.

Stroke 환자에 있어서 MAS(Motor Assessment Scale)를 이용한 운동 능력평가와 각각의 평가 항목과의 상관관계

김광수,Kim, Kwang-Soo 대한물리치료과학회 1997 대한물리치료과학회지 Vol.4 No.4

The purpose of this research were to evaluate the overall capacity of activity in hemiplegic patients caused by stroke, to learn the relationship of the overall capacity of activity with 8 out of 9 subtest of the Motor Assessment Scale (MAS) excluding general tonus subtest, and to use in creation of more efficient rehabilitation program by using Motor Assessment Scale (MAS). Twenty-four stroke patients (14 men and 10 women) were the subjects in this study. Their average age was 59.5 and they received average of 17.88 month of therapy. Collected data analysis was completed by using Statistic Analysis System (SAS). The results were as follows: 1) There was no difference in capacity of activity between right hemiplegia and left hemiplegia. 2) There was no difference in capacity of activity compared therapeutic period and age. 3) In comparing the relationship of the each subtest with the overall capacity of activity, upper arm function showed the highest relation (pearson's r = 0.914), and balance sitting (pearson's r= 0.812) and supine to sitting overside of bed (pearson'sr = 0.746) also showed large relationship. 4) Hand movement (pearson's r = -0.45) and advanced hand activity (pearson's r = -0.401) revealed relationship of general tonus with each subtest. 5) Supine to sitting over side of bed (pearson's r = 0.74), balanced sitting(pearson's r = 0.523), and sitting to standing (pearson's r = 0.723) showed large relationship with walking.

Clay/EAF dust계 시편의 소결과정 중 액상거동 제어

김광수,강승구,Kim, Kwang-Soo,Kang, Seung-Gu 한국결정성장학회 2005 한국결정성장학회지 Vol.15 No.2

지정 폐기물인 electrical arc furnace(EAF) 더스트에는 액상을 형성하는 fluk 성분이 많이 포함되어있어, 점토와 혼합하면 시편의 소결온도를 낮춰주고 기계적 강도를 향상시키는 장점이 있다. 그러나 더스트-점토 계 벽돌 제조시 더스트 첨가량을 증가시키면 소결과정에서 과도한 액상이 생성되어 제품 불량률이 높아진다. 점토-더스트 계 시편의 소결공정 중에 발생하는 액상을 제어하기 위하여 $Al_2O_3$를 첨가하고 물리적 특성 변화를 분석하였다. $Al_2O_3$가 첨가된 더스트-점토계 소결체는 기공크기가 감소되면서 미세구조가 균일해졌다. 이에 따라 기계적 강도가 증가되었고 동시에 최대강도가 나타나는 온도가 높아졌다. 또한 겉보기 밀도가 증가되었고 흡수율은 감소하였다. 첨가된 $Al_2O_3$는 mullite($3Al_2O_3{\cdot}2SiO_2$)를 생성함으로서, 액상형성에 참여할 $SiO_2$을 소모시키고 동시에 액상의 점도를 높여, 소결체의 내화도를 증진시키고 따라서 소결과정에서 시편 불량률을 낮출 것으로 분석되었다. The electrical arc furnace (EAF) classified as a special waste contains many flux components producing melts during a sintering process, so it decreases the sintering temperature and improves the mechanical properties of specimens. Increasing dust content in a clay-dust system brick, however, may cause the fraction defective higher due to the excessive liquid produced. To control the liquid behavior produced during sintering process for the clay-dust system specimens, the $Al_2O_3$ was added and the physical properties were analyzed. The microstructure for the clay-dust system body sintered with $Al_2O_3$ became homogeneous and the overall size of pores decreased. Adding $Al_2O_3$ to clay-dust system body increased the mechanical properties and the temperature of maximum strength increased as much as $50^{\circ}C$, and the apparent density increased and the absorption decreased. The mullite ($3Al_2O_3{\cdot}2SiO_2$) was produced during sintering process by reaction of $Al_2O_3$ and $SiO_2$ which could participate to liquid-producing-process and the viscosity of melts increased which was proved by measuring a critical viscosity temperature (Tcv) therefore, the refractoriness of specimens were improved to lower the fraction defective.

자동창고 시스템의 컴퓨터 시뮬레이션 연구

김광수,최영환,Kim, Kwang-Soo,Choi, Young-Hwan 대한산업공학회 1990 산업공학 Vol.3 No.2

One of the most important and powerful tools available for design and/or study of the operation of complex systems and processes is simulation. Since automated material handling systems like AS/RS are often quite complex, a network-based simulation model is developed to analyze an automobile part supplier's automated storage and retrieval system(AS/RS). The network simulation model is implemented in the SLAM Ⅱ on a VAX 8800 computer. Performance of the AS/RS was tested for 3 dispatching rules, 3 work load levels, 2 storage policies, 3 levels of stacker crane break-down, and 2 conveyor system layouts. Results indicate that the AS/RS performance is primarily affected by the dispatching rule and work load level.

회전형(回轉型) 축열식(蓄熱式) 열교환기(熱交換器)에서의 온도효율(溫度效率)에 관한 연구(硏究)

김광수,Kim, Kwang Soo 대한설비공학회 1989 설비공학 논문집 Vol.1 No.1

This paper treats the temperature effectiveness of the two-fluid counterflow regenerator in a rotary type. To avoid continual interpolation and to obtain the simple result in calculating that, it obtained the particular solution for the direct-transfer-type counterflow heat exchanger by the graphical procedures. Also, it introduced the empirical formula for the influence of the ratio of rotor matrix to minimum working fluid heat capacity rate with the particular solution induced. Particularly, substituting the published results of temperature effectiveness into the program, it obtained the simple and convenient equation which can applicate in the counterflow regenerator in a rotary type. To compare and discuss the results induced, selecting the regenerative air preheater and applying the their running datum and specifications to the related results, it shows that the above results are agree with the published results within absolute relative error, 3.0%.

국내 해양시설의 신고 현황과 관리 방안에 관한 연구 1. 전국의 해양시설 현황을 중심으로

김광수,Kim, Kwang-Soo 해양환경안전학회 2010 해양환경안전학회지 Vol.16 No.3

국내에서 2008년과 2009년 국토해양부장관에게 신고한 해양시설의 전국 현황을 분석한 결과, 2009년 말 현재 총 672개소의 해양시설이 전국의 동 서 남해 해안에 산재하였다. 마산지방해양항만청에 신고한 해양시설 수가 124개소로 전국의 약 18.5%를, 목포청과 포항청에 신고한 해양시설은 공히 69개소로 전국의 약 10.3%를 각각 차지하였다. 마산청과 부산청에 신고한 해양시설의 합계가 181개소로 전국의 26.9%를 차지함으로써 전국 해양시설의 4분의 1이상이 부산과 마산을 중심으로 하는 남해 동부해역에 집중되었다. 기름 및 유해액체물질 저장시설은 320개소로 전국 해양시설 총 672개소의 47.6%를 차지하여 시설 종류별 1위였다. 오염물질저장시설은 11개소로 1.6%를, 선박 건조, 수리 및 해체 시설은 178개소로 26.5%를, 하역시설은 7개소로 1.0%를, 폐기물해양배출업자의 폐기물저장시설은 12개소로 1.8%를, 연면적 $100m^2$ 이상의 해상관광시설, 주거시설(호텔 콘도), 음식점은 전혀 신고가 없었고, 관경의 지름이 600mm 이상의 취수 배수시설은 88개소로 13.1%를, 유어장은 37개소로 5.5%를, 그 밖의 시설은 13개소로 1.9%를, 국가해양관측을 위한 종합해양과학기지는 6개소로 0.9%를 차지하였다. 해양시설 관리방안으로는 해양시설 신고제도의 계도 및 홍보, 신고제도 및 관리방안의 개선, 신고업무 처리의 개선 및 보완, 신고제도에 대한 해양시설 설치자의 자발적 참여 및 준수사항 이행 등을 제안하였다. Present state of nationwide marine facilities reported to Minister of Land, Transport and Maritime Affairs{MLTM} in Korea for two years 2008 and 2009 was analyzed, and management plan was proposed in this study. As of the end of 2009, total number of nationwide marine facilities was reported to be 672 and to be scattered along the coasts all over the nation. 124 marine facilities reported to Masan regional maritime affairs and port office occupied 18.5% of total nationwide number. 69 marine facilities reported to Mokpo regional office and 69 marine facilities reported to Pohang regional office occupied 10.3%, respectively. 181 marine facilities reported to Busan and Masan regional offices occupied 26.9%, meaning that about a quarter of total nationwide marine facilities concentrated in Southeastern Sea of Korea centering around Busan and Masan. 320 oil and noxious liquid substances storage facilities occupied 47.6% of total nationwide number. 11 pollutant storage facilities occupied 1.6%. 178 ship construction, repair and scrap facilities occupied 26.5%. 7 cargo handling facilities occupied 1.0%. 12 waste storage facilities occupied 1.8%. none of marine facilities for tourism, housing and restaurant were reported. 88 water intake and outlet facilities occupied 13.1%. 37 fishing spots at play occupied 5.5%. 13 other marine facilities occupied 1.9%. 6 integrated marine science base facilities occupied 0.9% of total nationwide number. The guidance and the public relation for national report system of marine facilities, the improvement of national report system and management plan, the advancement and complement of national report affairs-handling guides, and the voluntary participation in national report system and the performance of duties by the owners of marine facilities were proposed for better management plan of marine facilities.

Biot수를 고려한 균일두께의 환상휜에서의 과도열전달에 관한 연구

김광수,Kim, Kwang-Soo 대한설비공학회 1985 설비저널 Vol.14 No.2

The heat diffusion equation for an annular fin is analyzed using Laplace transformations. The fin has a uniform thickness with its edge heat loss and two temperature profiles at the base such as a step change in temperature or heat flux. To obtain the exact solutions for temperature distribution, this paper can detect the eigenvalues which satisfy the roots of transcendental equations in above two cases during inverse Laplace transformations. The exact solutions for temperature and heat flux are obtained with the infinite Series by dimensionless factors. The solutions are developed for small and large values of times. These series solutions converge rapidly for large values of time, but slowly for small.