일본 미스터리 소설의 상호텍스트성1 -다니자키 준이치로와 에도가와 란포를 중심으로-

金尙垣 한국일본학회 2015 한국일본학회 학술대회 Vol.2015 No.08

産業體勤勞靑少年의 性敎育課程 模型 開發에 關한 硏究

金祥源 全北大學校 敎育大學院 1985 敎育論叢 Vol.5 No.-

The objective of the study is to design an optimum curriculum model for sex education of young employees working at each industrial company in Korea in order to sublimate their present sexual conflict and frustration, and thus to help them to work more efficiently. The study which was launched in July 1984 continuing until June 1985, adopted the questionaire survey approach to obtain relevant information from 1,200 young employees at 12 industrial companies which were sampled at random throughout the country. Those who were kind enough to answer the questionaires amount to 912 workers. On the basis of the questionaire and documentary information we were able to find out young employees' major sexual problems and facts such as lack of fundamental knowledge of sex, radical consciousness about sex, positive thought about premarital coitus. Meanwhile, we recognized that young employees usually get sexual knowledge and information through mass communication such as newspaper, TV, weekly magazine and radio. And it is noted that approximately 90% of them have not experienced sex education at their companies, even though 44.7% of them are in deep agony caused by premarital pregnancy and trouble of love, and 99.9% of respondents are in need of sex education at their industrial companies. In order to surmount these problems and to satisfy young employees' needs, we designed a practical curriculum model, which mandates such components as objectives of sex education, major contents, essential learning experiences, guidelines to teacher and evaluation, etc. In the actual application of the proposed model, it is to be always keep in mind that lecturers should try not to stimulate young boys and girls' sexual shyness and should make use of living examples in order to intensify students' learning motivation. Additionally, it is also recommended that learning group be consisted of boys and girls, and the proposed model be properly or flexively modified in actual teaching-learning situations depending on the characteristic features of the course or subject being taught. Conclusively, what is most important in the application of the model is strong and firm belief to teach efficiently and their teaching methods.

“五四” 人文知識人의 整體性

金尙源 한국중국문화학회 1999 中國學論叢 Vol.8 No.-

올해는 역사적 사건으로서의 ‘五四’ 運動이 발발한 지 80주년이 되는 해이자, ‘오사’ 운동의 정신전통을 계승하여 사회전반의 총체적인 사상해방과 정치적 민주화를 주창했던 ‘天安門 民主化運動’의 10주년이 되는 해이다. 일개 사건으로서의 ‘오사’는 서구 근대적 가치체계를 표방했던 新文化運動과 결합하면서 이후 중국 현대사의 독특한 정신전통과 人文知識人의 整體性을 담지하는 상징적인 기호로서 막강한 힘을 발휘하고 있다. 특히 중국 본토의 일부 개혁성향의 인문지식인들에게 있어서 상징적 기호로서의 ‘오사’는 精神的 母胎이자 여전히 실현하고 극복해야할 것으로 받아들여지고 있으며

芥川龍之介와 谷崎潤一郎의 플롯논쟁 일고찰

김상원(金尙垣),임만호(任萬鎬) 중앙대학교 일본연구소 2012 日本 硏究 Vol.0 No.32

The concept of the plot has been continuously changed up to today as Aristoteles has presented its concept for the first time, and still has not been clearly defined yet in a form of single explicit concept. However, one of the most differentiated factor in plot is developments of affair by cause and effect relationship, and secondly implementation of subject, and lastly formation of novel"s beauty of art. This is one of the most important factor in novel, and whether plot is good or not has correlation to evaluate whether the novel is good or not. Anti-Plot novel, which is primarily to destroy the story of today"s modern novel, but this can not denly that it has thought-provoking in even such novel. With respect to the concept of such plot, there has been argument between Tanizaki Jynichiro and Akutagawa Ryunosuke who were two greatest literary men in Japan since 1927. Tanizaki Jynichiro emphasized its interest and importance on Plot while Akutagawa Ryunosuke insisted novel without Plot is most artistic novel and pure art. The argument between theses two persons was ended in smoke, without winner due to Akutagawa Ryunosuke"s suicide. However, the argument has become important moment for those who study literature since then. For this thesis, the concept of plot presented since Aristoteles era is to be examined, and plot arguments in Akutagawa Ryunosuke and Tanizaki Jynichiro will be discussed after. And finally, difference between novel with emphasis on Plot by Tanizaki Jynichiro and novel without emphasis on Plot by Akutagawa Ryunosuke will be examined.

錢玄同의 ‘Esperanto’ 채용론

김상원(金尙源) 한국중어중문학회 2008 中語中文學 Vol.43 No.-

『異端者の悲しみ』 論

김상원(金尙垣) 중앙대학교 일본연구소 2013 日本 硏究 Vol.0 No.34

『Itansyanokanasimi』 is known as the only written confession of Tanizaki Junichiro. Originally Tanizaki finished the writing of his work in August, 1916 with the intention of posting 『Itansyanokanasimi』 on 「中央公論社」 in 1916 Sep, but it was first released 11 months later because of the opinions of the editorial department that it could be prohibited from publishing. And Tanizaki added a long introduction which was exceptional to him. To aim this point, this paper was executed to identify the meaning of outsider, psychological conditions and behavior patterns of main character, Shozaburo. First, the plot of 『Itansyanokanasimi』 was examined as study method. Second, the deleted parts were pondered which Tanizaki personally supervised and deleted when he edited his work for 新書版全集(1958 中央公論社版) Results showed that the meaning of the outsider in the work that the desire of Shozaburo which was forbidden in symbolic world that Lacan had suggested was finally realized in the real world. And the psychological conditions of Shozaburo were identified to stay in imaginary world which is a stage of psychological fixation conditions and he could not adapt in the symbolic world. But the author realized the ideal of main character, Shozaburo at the closing section of 『Itansyanokanasimi』, which it is actually impossible in the real world that Lacan mentions. Additionally the release was also connected with the death of Seki, Tanizaki’s mother and it was also a self-justification of publishing of 『Itansyanokanasimi』 which was forbidden and 11 months of gap was also required to add the deleted parts which Tanizaki himself deleted for the release 11 months later.

항공용 Ti-6Al-4V합금 체결부품의 Fillet Rolling 공정을 통한 피로 특성 향상에 관한 연구

조은빈,금상원,김도연,곽희만,최정묵 대한용접·접합학회 2023 대한용접학회 특별강연 및 학술발표대회 개요집 Vol.2023 No.5

온간단조 성형공법을 이용한 항공용 Ti64 합금 체결부품의 제조공정에 관한 연구

조은빈(E. B. Jo),금상원(S. W. Keum),곽희만(H. M. Kwak),최정묵(J. M. Choi) 한국소성가공학회 2021 한국소성가공학회 학술대회 논문집 Vol.2021 No.5

본 연구에서는 항공용 Ti 합금 체결부품에 대해 기계가공 최소화, 금형 수명 및 치수정밀도 극대화 등의 장점을 가지는 온간 성형공법을 적용함으로써, 제조공정 상용화 기술개발을 목표로 진행하였다. 항공용 체결부품 제조를 진행하면서 체결부품 및 시험평가 관련 규격인 NAS(National Aerospace Standard) 규격을 기준으로 제품의 품질을 만족하기 위한 제조공정 최적화 확립을 수행하였다. 항공용 Ti 합금 체결부품은 단조, 세척, 열처리, 전조, 가공 등 모든 공정별 규격이 각각 존재하며, 특히 나사부의 정밀도가 상당히 높아 제품의 품질을 만족하는 것이 매우 까다롭다. 따라서, 제품의규격별 단조 및 전조의 온도, 생산 조건 등을 DB화 하여 제작하고, 제품의 기계적 특성평가 결과를 만족시키고자 하였다. 최종적으로 제작된 제품은 NAS 규격 요구사항 평가 항목인 치수정밀도, 나사산 형상, 야금학적 특성, 기계적 특성(인장/전단/피로) 등을 평가하였으며 평가결과 규격에 만족하였다. 본 연구에서 온간성형 단조공법을 이용한 제조공정 최적화 확립을 통해 항공용 Ti 합금 체결부품의 국산화 목표가 가능함을 확인하였다. This study aimed to develop commercialization technology for manufacturing process by applying a warm forming method that has advantages such as minimizing machining, maximizing mold life and dimensional accuracy for aircraft Ti alloy fasteners. While manufacturing fastening parts for aircraft, based on NAS(National Aerospace Standard) standards, which are standards related to fastening parts and test evaluation, we established manufacturing process optimization to satisfy product quality. For aircraft Ti alloy fasteners, there are standards for all processes such as forging, cleaning, heat treatment, rolling, and machining. In particular, it is very difficult to satisfy the product quality due to the high precision of the thread part. Therefore, it was produced by making a database of forging and rolling temperature, production conditions, etc. for each product standard, and to satisfy the mechanical property evaluation results of the product. Finally, the manufactured product was evaluated for the NAS standard requirements evaluation items such as dimensional accuracy, thread shape, metallurgical properties, and mechanical properties (tensile/shear/fatigue), and the evaluation results satisfy the standard. In this study, it was confirmed that the goal of localization of Ti alloy fasteners for aircraft is possible through establishment of manufacturing process optimization using the warm forming forging method.