http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
권현웅,홍석윤,이광국,김종철,나인찬,송지훈,Kwon, Hyun-Wung,Hong, Suk-Yoon,Lee, Kwang-Kook,Kim, Jong-Chul,Na, In-Chan,Song, Jee-Hun 해양환경안전학회 2014 해양환경안전학회지 Vol.20 No.5
In this paper, Radar cross section (RCS) calculations of advanced naval vessels model with RCS reduction methods are simulated and RCS results are discussed. Especially, this paper are mainly focusing on the facts influencing on RCS, the ways minimizing RCS and material characteristics of RCS changing-rate. RCS analysis results are given for a DDG-1000 type advanced naval vessels, which show that as the elevation angle increased 10 degree, the mean RCS value increased 23.91 dBsm. Also, as the superstructure angle increased 6 degree, the mean RCS value reduced 1.27 dBsm. Finally, the radar absorbing material attachment at the front and back superstructure have been reduced 2.27 dBsm in terms of mean RCS value. 본 연구에서는 첨단 함형에 레이더 반사면적 감소기술을 적용하고 특성을 분석하였다. 특히, 레이더 반사면적에 영향을 주는 요소, 레이더 반사면적을 최소화 하는 방안, 표적의 특수 재질 물성에 대한 레이더 반사면적의 변화 영향을 고찰하였다. DDG-1000 type 첨단 함형의 함정 고각별 레이더 반사면적 해석 결과 고각이 10도 높아짐에 따라서 RCS 평균값이 23.91 dBsm 증가하는 것을 확인하였다. 또한, 함정 상부구조물의 경사각이 6도 증가함에 따라서 RCS 평균값이 1.27 dBsm 감소하는 것을 확인하였다. 마지막으로 상부구조물 앞면과 뒷면에 전파흡수체를 부착한 경우 RCS 평균값이 2.27 dBsm 감소 하는 것을 확인하였다.
Development of indirect EFBEM for radiating noise analysis including underwater problems
권현웅,홍석윤,송지훈 대한조선학회 2013 International Journal of Naval Architecture and Oc Vol.5 No.3
For the analysis of radiating noise problems in medium-to-high frequency ranges, the Energy Flow Boundary Element Method (EFBEM) was developed. EFBEM is the analysis technique that applies the Boundary Element Method (BEM) to Energy Flow Analysis (EFA). The fundamental solutions representing spherical wave property for radiating noise problems in open field and considering the free surface effect in underwater are developed. Also the directivity factor is developed to express wave’s directivity patterns in medium-to-high frequency ranges. Indirect EFBEM by using fundamental solutions and fictitious source was applied to open field and underwater noise problems successfully. Through numerical applications, the acoustic energy density distributions due to vibration of a simple plate model and a sphere model were compared with those of commercial code, and the comparison showed good agreement in the level and pattern of the energy density distributions.
권현웅,홍석윤,오대균,이지훈,황두진,김옥삼,송지훈 대한기계학회 2014 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.28 No.9
Energy flow analysis (EFA) can be used effectively to predict structural vibration in the medium-to-high frequency ranges. In thisstudy, the energy flow finite element method (EFFEM), based on EFA, was used to predict the vibrations of a reinforced cylindricalstructure in water. The predicted results of the vibrational energy density for the structure were compared with corresponding experimentalresults. The structure was divided into several subsystems in the experiment, with several accelerometers attached to each subsystem. The input power excited into the experimental structure was measured using an impedance-head adhered to an exciter. Measured inputpower was used to predict vibration of the reinforced cylindrical structure by EFFEM in water for comparing experimental and numericalresults. A comparison between the experimental and predicted results for the vibrational energy density showed that EFFEM was aneffective tool for predicting structural vibration.
탄성이론을 이용한 소나 다층구조물의 음향 수신 성능해석
권현웅,홍석윤,송지훈,김성희,전재진,서영수,Kwon, Hyun-Wung,Hong, Suk-Yoon,Song, Jee-Hun,Kim, Sung-Hee,Jeon, Jae-Jin,Seo, Young-Soo 한국음향학회 2013 韓國音響學會誌 Vol.32 No.4
수중무기체계에 있어 소나 탐지 성능은 생존성 향상을 위한 중요한 인자이다. 소나의 음향수신 성능을 파악하기 위해서 탄성이론을 이용하여 소나 다층구조의 음향 성능을 해석하였다. 단순구조물에 대하여 탄성이론을 적용하여 얻은 본 해석 결과를 상용해석프로그램인 ANSYS와 비교하였고, 만족할만한 결과를 얻었다. 검증된 탄성이론을 이용하여 소나 다층구조의 층별 두께 변화에 따른 음압 및 반향음 감소 해석을 수행하였다. 무반향(anechoic)층의 두께가 증가할수록 주파수에 따른 음압이 고르게 분포하고 반향음 감소량이 약간 증가하는 것을 확인하였다. 비결합(decoupling)층과 스틸(steel)층의 경우 두께에 따른 음압의 변화는 거의 없으나 두꺼워질수록 반향음이 약간 감소하는 결과를 나타내었다. 탄소강화플라스틱(Carbon Reinforced Platic, CRP)층의 두께 변화는 음압과 반향음 감소량에 영향이 없는 것을 확인하였다. 따라서 소나 다층구조의 음향성능을 높이기 위해서는 무반향층을 두껍게 하고, 비결합층, 스틸층과 탄소강화플라스틱층은 최소화하는 것이 바람직할 것으로 예상된다. SONAR detection performance is one of the key survivability factors in underwater weapon systems. In order to catch the acoustic ability of SONAR, multilayer SONAR structures are analyzed using the elastic theory. The applied results for the simple models are compared with those from commercial program, ANSYS, and the reliable results are obtained. The analysis of sound pressure level (SPL) and echo reduction (ER) by the thickness change of multilayer SONAR structures are performed using the verified elastic theory. As the thickness of anechoic layer is increased, SPL is distributed evenly and ER is increased slightly with the frequency. In decoupling layers and steel layers, SPL are hardly changed and ER is slightly decreased with the thickness increase of those layers. SPL and ER are not affected by the thickness change of the carbon reinforced plastic (CRP) layer. Therefore, to improve the acoustic ability of multilayer SONAR structures, the thickness increase of the anechoic layer and minimization of the decoupling layer, steel layer and CRP layer are desirable.
수소분리를 위한 Polyetherimide계 고분자 중공사막의 제조 및 기체투과 특성
권현웅,임광섭,김지현,김성헌,김도형,남상용 한국막학회 2021 멤브레인 Vol.31 No.6
본 연구에서는 비용매 유도 상분리법을 이용하여 폴리에테르이미드 계열의 중공사형 분리막을 제조하였다. 제조 된 중공사막의 모폴로지 조절을 위해 첨가제로는 THF, Ethanol, LiNO3를 사용하였다. 또한 높은 수소분리막의 개발을 위해 모폴로지와 기체투과성능을 특성평가를 통해 방사조건을 최적화하였다. 그 결과 THF의 함량이 증가할수록 수소/이산화탄소 선택도가 증가하였다. 하지만 trade-off 관계로 인하여 투과율은 감소하였다. Ethanol을 첨가하였을 때는 finger-like 구조를 나타냈고, LINO3를 첨가하였을 때 Sponge 구조를 보였다. 특히, PDMS 코팅층을 최적화한 중공사막의 경우, 투과율은 40 GPU, 수소/이산화탄소 선택도는 5.6을 나타냈다. In this study, polyetherimide-based hollow fiber membranes were manufactured using the NIPS (nonsolvent induced phase separation) method. THF, Ethanol, and LiNO3 were used as additives to control the morphology of the PEI-hollow fiber membranes. Furthermore, for the development of a high hydrogen separation membrane, the spinning conditions were optimized through the characterization of SEM and gas permeance. As a result, as the content of THF increased, the hydrogen/carbon dioxide selectivity increased. However, the permeance decreased due to the trade-off relationship. When ethanol was added, a finger-like structure was shown, and when LiNO3 was added, a sponge structure was shown. In particular, in the case of a hollow fiber membrane with an optimized PDMS coating layer, the permeance was 40 GPU and the hydrogen/carbon dioxide selectivity was 5.6.