http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
투과증발 기술에서 PVA가교 분리막을 이용한 초산 수용액 혼합물의 분리
권용성,Shivshankar chaudhari,박치영,문명준,손민영,남승은,박유인 한국막학회 2017 한국막학회 총회 및 학술발표회 Vol.2017 No.11
The hollow fiber composite membrane used in pervaporation test was prepared by dip coating method on the Polyether Sulfone hollow fiber using tartaric acid added PVA solution. And each membrane solution contains H2SO4 as acid catalyst for esterification reaction between PVA and TA. Also, to increase coating uniformity, specific amount of SDS(sodium dodecyl sulfate) was contained. Prepared membrane was characterized by IR spectroscopy, swelling to observe cross-linking degree of PVA and Tartaric acid then, finally used in pervaporation test. The pervaporation test was mainly studied about effect of catalyst amount in the membrane solution and the test was performed until pervaporation value converged.
Ni 발열체가 첨가된 열경화성 에폭시 접착제의 유도 가열 승온 거동 및 접착 강도 분석
권용성,임태규,이남규,문명준,손민영,김구니,오상택 한국공업화학회 2018 한국공업화학회 연구논문 초록집 Vol.2018 No.0
최근 자동차, 항공 등 다양한 산업에서 차체의 중량 감소를 통한 연비 절감을 위하여 메인 소재를 금속에서 고분자 복합 재료로 대체하고 있으며, 최근 출시되는 차량은 차체의 약 70%가 고분자 복합재료로 이루어져있는 경우도 있다. 따라서 고분자 복합 재료의 경우 차체간의 연결을 위하여 용접이 불가능하기 때문에, 구조용열경화성 접착제의 수요와 역할이 중요해지고 있다. 하지만, 고분자 복합 재료는 특유의 낮은 열전도도로 인해 오븐에서 접착제의 경화를 실시할 경우, 접착제의 승온 시간이 길어진다는 단점이 존재하기 때문에, 본 연구에서는 구조용 열경화성 에폭시 접착제에 Ni 분말을 발열체로서 첨가하여 유도 가열 공정을 통해 경화 시킴으로써 승온 거동 및 접착 강도를 측정하여 기존의 오븐 경화 공정과 비교하고자 하였고, 접착제 내 Ni 분말의 함량에 따른 승온 거동 및 접착 특성을 연구하였고, 오븐경화와 유도 가열 경화에 따른 에폭시 접착제의 물성을 분석하였다.
에폭시 수지 제조 공정 부산물의 분리 회수를 위한 Alumina-PVA 투과 증발 복합막 제조
권용성,정성민,조영훈,김정,박호식,박유인,남승은,Shivshankar Chaudhari,손민영 한국막학회 2018 한국막학회 총회 및 학술발표회 Vol.2018 No.11
In the epoxy resin manufacturing process, carcinogenic ECH (epichlorohydrin), IPA (isopropanol) and Biphenol-A materials has been generally used. After the reaction, byproducts containing ECH/IPA/Water is remained along with final product. But, in the recovery process, ECH and IPA forming an azeotropic mixture with water containing feed solution at any temperature condition, the recovery of high purity ECH is difficult only by distillation. Therefore, pervaporation process could be suitable countermeasure due to its mild operation condition for separation of azeotropic mixtures at the point of energy and cost saving. In this study, Alumina-PVA composite membrane was prepared for pervaporation dehydration of ECH/IPA/Water feed mixtures and pervaporation performance and stability of the prepared composite membrane was identified.
인터넷 서비스 거부 공격 방지를 위한 원격 제어 서비스 알고리즘
權容成,曺慶鉉,姜熙勳,金珍祐,羅希洙 대한전자공학회 2003 電子工學會論文誌 IE (Industry electronics) Vol.40 No.9
In this paper, we proposes remote control Signal algorithm using internet service, safety of data send and internet traffic by Denial of Service Attacks. In case of Denial of service Attacks, it makes connection of internet service failed for internet information service. So in this paper, this solution was examined and implemented for receiving data in safety against Denial of Service Attacks by LabVIEW program of National Instruments. 본 논문에서 서비스 공격 거부에 대한 인터넷 서비스, 데이터 전송의 안전성과 인터넷 트래픽을 사용한 원격 제어 신호 알고리즘을 제안한다. 서비스 공격 거부의 경우, 인터넷 정보 서비스를 위한 인터넷 접속 상태가 끊어지게 된다. 따라서 본 논문에서 제안한 해결 방안을 제시하고, National Instruments사의 LabView 컴퓨터 가상 실험 프로그램을 사용하여 검증한다.
권용성,( Chaudhari Shivshankar Subhash ),손민영,문명준,곽삼탁,박유인,남승은,송혜림 한국공업화학회 2015 한국공업화학회 연구논문 초록집 Vol.2015 No.0
The pervaporation test was conducted by using poly (vinyl) alcohol cross-linked with dicarboxylic acid, Tartaric acid. Various property of the prepared membrane was characterized by IR spectroscopy, Differential scanning calorimetry (DSC), Contact angle test, and swelling studies, after then it was finally applied in the pervaporation test using different concentration of acetic acid feed solution. In the IR spectra, we could observe that cross-liking reaction became more intense with increase of the tartaric acid concentration in the casting solution while there was no remarkable decrease of hydroxyl group on the part of cross-liking reaction because of hydroxyl group supplement of the tartaric acid. This result also could be supported by result of both DSC and contact angle measurement. From the pervaporation test result, we observed that flux steadily decreased with increase of acetic acid content in the feed solution, separation factor was a contrast to the flux. And acetic acid content in the permeated solution was no significant increase with increase of acetic acid content in the feed solution. Accordingly, it could be concluded that this membrane has a higher flux and good selectivity in the low concentration of acetic acid feed solution.