RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
        • 학술지명
          펼치기
        • 주제분류
        • 발행연도
          펼치기
        • 작성언어

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • PBD를 위한 화재시뮬레이션에서 시안화수소(HCN)가 ASET에 미치는 영향

        권오수(Oh-Soo Kwon),한호식(Ho-Sik Han),이재오(Jae-Ou Lee),황철홍(Cheol-Hong Hwang) 한국화재소방학회 2022 한국화재소방학회 학술대회 논문집 Vol.2022 No.추계

        건축물에서 발생된 화재로 인한 인명피해는 화재 공간 내부에 있는 가연물의 열분해 및 화학적 반응에서 생성된 독성가스에 의해 증가될 수 있다. 화재환경에서 발생된 다양한 가스 중 극소량으로도 인체에 치명적일 수 있는 가스는 대표적으로 시안화수소(Hydrogen cyanide, HCN)와 포스겐(Phosgene, COCl2) 등이 있다. 특히 HCN은 건축물의 단열재, 생활가구의 완충재 등으로 사용되는 Polyurethane (PU)과 같은 고분자 물질을 통해 발생되기 때문에, 화재 안전성 평가에서 고려되어야 할 화학종 농도 중 하나라고 판단할 수 있다. 최근 국내에서 시행되고 있는 화재안전 성능위주설계(Performance-based design, PBD) 평가보고서를 확인해 보았을 때, 화재시뮬레이션에 적용되고 있는 다양한 가연물 중 큰 비중을 차지하고 있는 물질은 HCN을 발생시킬 수 있는 PU GM21으로 확인되었다. 그럼에도 불구하고 국내 인명안전기준에서는 HCN의 농도를 적용하지 않고 있는 실정이다. 반면에 국외에서는 HCN이 인체에 치명적인 독성이 포함되어 있는 것을 고려하여, 인명안전기준에서 HCN 농도 80 ppm을 적용하고 있다. 인명안전기준에서 CO의 임계값이 1,400 ppm인 것을 고려하자면, 상대적으로 매우 낮은 농도에서도 위험할 수 있기 때문에 HCN 농도는 허용피난시간(Available safe egress time, ASET)에 큰 영향을 미칠 수 있다. 이에 본 연구에서는 화재시뮬레이션에서 HCN이 고려됨에 따라 ASET 예측결과에 미치는 영향이 검토되었다. 이를 위해 단순한 공동주택 형상을 대상으로 시뮬레이션을 수행하였으며, 수치해석 조건으로는 열방출률 및 HCN yield의 민감도 분석이 수행되었다. 수치해석 결과는 화재모델의 V&V 결과를 적용하여 분석되었다. 주요 결과로써, ASET의 예측결과는 화재모델의 V&V 결과가 적용됨에 따라 HCN 농도에 의해 결정되는 것으로 검토되었으며, 이를 통해 인명안전기준에 HCN을 고려함으로써, ASET 예측결과에 대한 신뢰성이 향상될 것으로 기대된다.

      • KCI등재

        해방 후 북한 지역 지방인민위원회의 재편 : 면·리 단위를 중심으로

        권오수 ( Kwon¸ Oh-soo ) 강원사학회 2022 江原史學 Vol.- No.38

        이 글은 1947년 북한 지역에서 시행된 면·리 인민위원회 위원선거를 중심으로 북한 정권 수립기 면·리 인민위원회의 재편 과정과 그 역사적 의의를 규명한 것이다. 해방 직후 북한지역에서는 인민위원회 형태의 지방정권기구가 창출되었다. 그러나 면·리 단위는 토지개혁을 통한 농촌 사회의 근본적인 변화에도 불구하고 지방 정권기구로서 역할을 제대로 수행하지 못하였다. 이에 북한지역 정치주도세력은 선거를 통해 면 인민위원회를 재편하고 리 지역까지 인민위원회 조직을 확대하고자 하였다. 북한 지역 면·리 인민위원회 위원선거는 1947년 2월과 3월에 시행되었다. 선거 후 북한지역에서는 지방인민위원회가 말단 행정 단위까지 완전히 조직·재편되어 통일적인 정권기구가 구축되었다. 선거를 통해 새롭게 선출된 인민위원의 정당별 구성은 각 도별로 차이는 있지만 대체로 북로당의 비율이 높았다. 또한 면·리 인민위원회는 대부분 농민을 중심으로 인민위원이 구성됨에 따라 ‘인민정권’의 성격이 더욱 강화되었다. This article is to analyze the process and result of the People's Committee Election of 1947 in North Korea, and to catch the organizing process and characteristics of the local People's Committee at the period of State Building in North Korea. The North Korean Provisional People’s Committee organized the election committee to hold the township and village elections, set the electoral districts, and made the voter’s lists. The Election Committee was formed through towns. And electoral districts made under the Japanese rule changed into administrative districts of village, and was under direct control of City People's Committee. In principle, candidates were needed the recommendation of the General Election Committee, but, in the case of village elections, they was recommended by the North Korean Worker's Party, and in the case of town elections, the North Korean Democratic National United Front generally recommended them in consideration of the local circumstances. Classifying the elected People Committee member according to parties, the North Korean Worker's Party winners, despite regional differences, were the most among the elected winners. Therefore, it suggests that the political influence of the North Korean Worker's Party was the most crucial, even though candidates was recommended in view of the local real circumstances. And Grouping them by social class, the majority were the peasant. In North Korea, considering that much of population was the peasant, the radical class-oriented changes within the apparatus of government had taken place. Regarding of the entry of the peasant into the political machinery, they had played an important role in building of the ‘People's Government’, which are now argued by North Korea.

      • KCI등재

        근현대 한국 석유사 연구의 현황과 과제

        권오수(Kwon, Ohsoo) 동국역사문화연구소 2021 동국사학 Vol.70 No.-

        근현대 한국 석유사 연구는 1973년 석유 파동 직후 한국의 에너지 문제를 극복하기 위한 대책을 마련하면서부터 시작되었다. 그러나 한국 석유사에 대한 접근은 에너지 위기 극복을 위한 석유 전문가들의 정책적 제언을 위한 부수적인 차원에서 개괄적이고 간략하게 서술되었다. 연구 경향 또한 1964년 울산정유공장 준공으로 부터 시작된 정유 산업의 발전 과정에 주로 집중되었다. 이후 한국 석유에 대한 역사적 접근은 1989년 해방 후 귀속기업체인 조선석유주식회사의 처리 과정에 대한 연구를 시작으로 2010년 중반 이후 한국 석유의 제도사적 접근, 울산정유공장 건설 과정에 대한 다층적 접근, 일제 강점기 조선총독부의 석유 정책, 해방 후 미국의 대한 석유 정책 등 다각적으로 접근되고 확대되고 있다. 그러나 한국 석유사의 종합적 이해와 한국 근현대사의 전개 과정에서 석유가 가지는 의의를 종합적으로 이해하기 위해서는 아직 밝혀져야 할 내용들이 많이 있다. 이에 이 글에서는 한국 석유사 연구의 향후 연구 과제를 다음과 같이 제시한다. 우선 한국 석유사의 전개 과정에서 가장 큰 영향력을 행사하였던 미국의 대한 석유 정책에 관한 연구를 심화해야 한다. 특히 미국 대외 석유 정책에서 가장 근간을 이루는 코포럿 리버럴리즘이 한국에 적용되는 과정을 분석하는 것은 근현대 한국 석유사 전개 과정뿐만 아니라 미국의 대한 정책 연구의 지평을 확대할 수 있다는 점에서 중요하다. 다음으로 한국 석유사는 미국 중심의 국제 석유 네트워크를 기반으로 하여 추진되었다는 점에서, 미국의 대한 석유 정책과 밀접한 관계를 맺고 있는 중국, 일본, 홍콩, 동남아시아 지역으로 연구의 공간적 범위를 확장해야 한다. 이를 위해서는 국제 석유회사 관련 자료를 발굴함과 동시에 기업사 연구 또한 확대해 나가야 한다. 마지막으로 한국 석유 산업의 독자적인 발전 과정 또한 심화하고, 석유로 인해 나타난 사회적, 문화적 변화상을 종합적으로 분석해야 한다. 이러한 연구 지평의 확대를 통해 한국 근현대사의 전개 과정에서 석유가 가지는 의미는 더욱 폭넓게 이해될 수 있을 것이다. Research on Korean oil history began shortly after the 1973 oil crisis, with the provision of measures to overcome Korean energy problems. However, the approaches to Korean oil history was outlined and briefly as a supplement to the policy recommendations by oil experts. The research trends also focused mainly on the development process of the oil refinery industry, after the completion of the Ulsan refinery in 1964. Since then, research on Korean oil history has been approached and expanded from multiple perspectives, such as the disposing process of the Vested, the institutional history, the construction plan of the Ulsan refinery, the oil policies during Japanese occupation, and the U.S. oil policy in Korea after the Liberation. However, there are still many subjects to be studied for a comprehensively understanding of Korean oil history. This article will present prospects of research on Korean oil history as follows. Firstly, It is necessary to be deepened research on the U.S. oil policy toward Korea, which exerted a strong influence on Korean oil history. In particular, it is important to analyze the process of applying the American corporate liberalism to Korean oil history. Secondly, since Korean oil history has developed around the international oil network, the spatial scope of research should be expanded. Lastly, it is necessary to be deepened the inde pendent development of Korean oil industry, and analyzed the social and cultural changes caused by oil. This expansion of research will help to understand more broadly the meaning of oil in the development of Korean history.

      • KCI등재

        1945-1948년 미군의 대한 석유 정책과 “쓰리 시스터즈(Three Sisters)”

        권오수 ( Ohsoo Kwon ) 한국미국사학회 2018 미국사연구 Vol.47 No.-

        The U.S. government and oil companies have formed a close relationship in order to secure and maintain control over the world oil market. This relationship went on the same in Korea, which was occupied and controlled directly by the U.S. military immediately after World War Ⅱ. The U.S. military reorganized Korea into an oil market to sell petroleum products produced by U.S. oil companies under the control of GHQ, SCAP. The reason GHQ, SCAP took this policy was to protect the oversea refining industry operated by U.S. oil companies as well as its strategic understanding for the oil refining industry in Northeast Asia. The U.S. military also provided a base for foreign oil companies - “Three Sisters” forced to withdraw from Korea due to the Pacific War, to re-enter Korea and intervene directly in the Korean oil market. Three Sisters returned to Korea as the Petroleum Advisory Group under the plan of CINCAFPAC in the early days of occupation and they operated the Petroleum Distributing Agency established by USAMGIK. USAMGIK and oil companies operated PDA in close relationship. However, there was a clear difference in basic awareness in operation. Oil companies wanted to operate PDA as a commercial business economically and efficiently. On the other hand, USAMGIK prioritized the supply of minimum petroleum products to maintain occupied area, and they did not consider the economic considerations in operating PDA. Because of USAMGIK oil policy, PDA was not operated as intended by oil companies. Nonetheless, oil companies operated PDA under USAMGIK control. Because the ultimate goal of oil companies was to make profits by supplying direct petroleum products to Korea in the future.

      • KCI등재

        제2차 경제개발5개년계획 시기(1967~71) 전력산업과 미국 석유회사

        권오수(Kwon Oh-soo) 동국역사문화연구소 2018 동국사학 Vol.65 No.-

        본고는 제2차 경제개발5개년계획 시기 전원개발계획과 미국 석유회사의 전력산업 진출과정을 검토하여 한국 전력산업과 미국 석유회사 간에 어떠한 관계가 형성되었는지를 밝혀보았다. 제2차 경제개발5개년계획 시기 정부는 석유 중심의 에너지 정책을 추진함과 동시에 한국전력과 별도로 민영전력회사 설립을통해 대규모 전원개발계획을 추진하였다. 미국 석유회사는 이러한 배경 하에 민간발전소를 건설하여 한국 전력산업으로 진출하였다. 그러나 미국 석유회사가한국 전력산업으로 진출하고자 한 궁극적인 목적은 한국 석유 시장에 진출하고보장받기 위한 것이었다. 특히 유니언오일은 발전소와 병행한 간이정유공장을 건설함으로써 이를 기반으로 한국 석유시장으로도 진출할 수 있었다. 한국전력과 민영전력회사는 장기유류공급계약과 차관공급계약을 매개로 미국 석유회사와 결부되었다. 장기유류공급계약을 통해 한국전력은 안정적으로 연료를 공급받을 수 있었고 차관을 통해 운영 자금을 확보할 수 있었다. 석유회사는 석유 공급에 대한 독점권을 행사하며 안정적인 수익을 보장받을 수 있었다. 그러나 한국의 전력산업은 미국 석유회사에 의존적인 구조가 형성되면서 국제석유시장의 영향을 그대로 받게 되었다. This paper examines the relationship between Korean electric power industry and American oil companies by researching the generation expansion planning and entry of American oil companies into the Korean electric power industry during 2nd 5-Year Economic Development Plan. The government promoted energy policy based on fuel oil and promoted large-scale generation expansion planning by the establishment of private power companies separate from Korea Electric Power Company. Under this background, American oil companies built private power plants and entered Korean electric power industry. However, the ultimate goal of American oil companies to enter Korean electric power industry was to enter and secure the Korean oil market. In particular, Union Oil was able to advance into the Korean oil market by constructing an oil refinery to supply fuel with the power plant. Korea Electric Power Company and private power companies were linked to American oil companies through long-term fuel oil contracts and loan contracts. Under long-term fuel oil contracts, Korea Electric Power Company was able to secure stable fuel supply and loans, and American oil companies were able to secure stable profits by exercising their exclusive rights to supply fuel. However, Korean electric power industry eventually has been affected by world oil market as a result of the dependence on American oil companies.

      • KCI등재

        슬관절 재치환술 시 경골 삽입물 주대 형태와 고정방법의 생역학적 영향

        권오수(Oh Soo Kwon),배대경(Dae Kyung Bae),김윤혁(Yoon Hyuk Kim) 대한정형외과학회 2007 대한정형외과학회지 Vol.42 No.2

        목적: 유한효소해석을 이용하여 경골 삽입물 주대의 형태와 고정방법이 슬관절 재치환술 후 주대 말단부의 생역학적 변화에 미치는 영향을 분석하고자 한다. 대상 및 방법: 26세 남성의 정상 경골의 CT와 PFC revision system의 경골 삽입물(tibial base plate)과 직경 10 ㎜, 길이 115 ㎜의 경골 주대(tibial stem)를 사용하여 유한요소 해석을 위한 경골 모델을 개발하였다. 주대 형태 요소 중 주대의 길이, 직경, 압박 고정, 슬롯(slot) 유무와 마찰 계수 등의 변화에 대해 접촉압력, 응력 및 전위 정도를 측정하였다. 결과: 주대의 길이가 연장되고 직경이 굵어질수록 압박 고정식 주대의 접촉 압력과 응력이 증가하였으며 슬롯 (slot)이 존재하는 경우에 접촉 압력과 응력이 감소하였다. 마찰계수가 높아질수록 전위의 정도는 감소하였다. 결론: 골 상태 등을 포함한 해부학적 여건이 허용되는 경우에는 골간부에서 안착되어 안정성을 얻을 수 있는 최소한의 길이와 이 부위에서의 골수강 내 직경에 가장 가까운 주대를 선택하며 지나친 압박고정을 피하는 것이 생역학적으로 주대 말단부의 접촉 압력과 응력을 감소시킬 수 있을 것으로 사료된다. Purpose: This study examined the effect of the stem design and method of fixation on biomechanical features around a stem tip in revision total knee arthroplasty using finite analysis. Materials and Methods: A 3D Finite element model was reconstructed for a CT scan of the normal tibia from a 26 year old male and the CAD model of total knee arthroplasty revision was developed. The design change in the stem such as the length, diameter, slot, press fit and coefficient of friction was performed. The contact pressure, von-Meises stress around the stem and the micromotion were evaluated. Results: A longer length and larger diameter press fit stem significantly increased the contact pressure and stress at the end of stem. The distal slot reduces the contact pressure and stress at the end of stem. Less displacement between the tibial component and bone was noted in the increased coefficient of friction. Conclusion: A stem with shorter length sufficient to engage proximal diaphysis, a closer diameter of the proximal canal and a minimal press fit can be used to reduce the contact pressure and stress if the patient's surgical anatomy such as bone loss and quality is tolerable in revision total knee arthroplasty.

      • KCI등재

        회전근 개 부분 파열의 임상 양상 및 관절경 소견

        권오수(Oh Soo Kwon),김양수(Yang Soo Kim),이규영(Kyoo Young Lee) 대한정형외과학회 2007 대한정형외과학회지 Vol.42 No.2

        목적: 회전근 개 부분 파열의 파열 위치에 따른 수술 전 임상 양상을 비교하고 관절경 소견에 따라 회전근개 파열을 분류하고자 하였다 대상 및 방법: 관절경하에서 확진된 138예의 회전근 개 부분 파열 환자를 대상으로 하였다. 각 군간에 동통, 관절운동 범위, 충돌 징후 등의 이학적 검사를 포함한 수술 전 임상 소견을 비교하였으며 관절경하 소견에 따라 부분 파열을 분류하였다. 결과: 관절측, 점액낭측, 양측 파열간에 수술 전 임상 양상은 통계학적으로 유의한 차이가 없었다. 관절경 소견상회전근 개 부분 파열은 5개의 형태로 분류될 수 있었다. 제 1형은 닳아 헤어진 소견(fraying)이 있는 경우이며, 제 2형은 섬유의 단열이 있으며 제 3형은 충판(flap)을 형성하거나 분획화(fragmentation)된 경우이다. 제 4형은 관절측과 점액낭측에 모두 파열이 존재하지만 양측간에 교통은 없는 경우이며 제 5형은 전층 파열로의 진행이 임박하였으나 최후의 건 섬유의 다양한 형태가 관찰되었다. 결론: 회전근 개 부분 파열의 진단에서 수술 전 이학적 검사를 통한 임상 양상에 따라 파열 위치를 예측하기는 어려울 것으로 사료된다. 관절경하 소견을 통한 새로운 분류가 회전근 개 부분 파열의 치료 방침을 결정하는데에 도움을 줄 수 있을 것으로 생각된다. Purpose: To compare the clinical features of partial thickness rotator cuff tears according to location of the tear and to classify the partial thickness rotator cuff tears based on arthroscopic findings. Materials and Methods: This study evaluated 138 patients who were arthroscpically proven to be partial thickness rotator cuff tears. Three groups were identified; 56 in the articular side tear, 58 in the bursal side tear, 24 in the both sides tear. The comparison included preoperative clinical features such as pain, range of motion and impingement sign. The partial thickness rotator cuff tears were classified according to the arthroscopic findings. Results: There was no significant difference in the clinical features between articular, bursal and both sides tears. Partial thickness rotator cuff tear can be divided into 5 groups. Type Ⅰ (n=41): fraying or fibrillation on surface of the cuff. Type Ⅱ (n=35): fiber disruptions with or without displacement. Type Ⅲ (n=38): flap tear or fragmentation. Type Ⅳ (n=16): both articular and bursal side tears without communications. Type Ⅴ (n=8): impending a full thickness tear. Conclusion: It is difficult to differentiate the clinical features based on the physical examinations according to the locations of tears. Newly designed classification may help in deternmining the appropriate arthroscopic treatment of a partial thickness rotator cuff tear.

      • KCI등재

        회전근 개 부분 파열에서 자기공명 관절조영술과 관절경 소견의 비교 연구

        권오수(Oh Soo Kwon),박상은(Sang Eun Park),신은수(Eun Su Shin) 대한견주관절의학회 2009 대한견주관절의학회지 Vol.12 No.1

        목적: 회전근 개 부분 파열에 대한 정확한 진단을 위해서는 영상검사가 필수적이다. 이 논문의 목적은 자기공명 관절조영술과 관절경 소견을 비교하여 자기공명 관절조영술의 회전근 개 부분 파열에 대한 진단능력을 평가하는 데에 있다. 대상 및 방법: 신체 검사상 회전근 개 질환으로 의심되어 자기공명 관절조영술 및 관절경 수술이 시행된 177예의 환자를 대상으로 하였다. 파열의 자기공명 관절조영술 소견과 관절경 소견을 비교하여 회전근 개 파열의 위치에 따른 자기공명 관절조영술의 진단 능력을 평가하였다. 관절면 회전근개 부분 파열의 크기에 대한 일치도를 구하였다. 결과: 파열의 위치에 따라 관절면, 점액낭측 및 양면 파열의 3 군으로 분류하였으며 각각 56예, 26예, 17예였다. 자기공명 관절조영술은 관절면 회전근 개 부분 파열에 대한 민감도 82%, 특이도 88%를 보였으며 점액낭측 파열인 경우에는 민감도 11%, 특이도100%를 보였다. 관절면 회전근개 부분 파열의 크기에 대한 자기공명 관절조영술 소견과 관절경 소견의 일치도는 72%였다. 결론: 자기공명 관절조영술은 관절면 회전근 개 부분 파열의 진단에는 유용하나 점액낭측 파열의 진단에는 한계가 있었다. Purpose: The purpose of this study was to assess the efficacy of MR arthrography to detect partial thickness rotator cuff tears. Materials and Methods: One hundred and seventy seven patients with a high suspicion for rotator cuff disease were studied by performing MR-arthrography and subsequent arthroscopy. The ability of MRarthrography to detect partial thickness tears was evaluated according to the location of the tears. We determined the correspondence between the measurements of the articular side partial tears on MR arthrography and those on the arthroscopic findings. Results: The arthroscopic diagnosis of partial thickness rotator cuff tears was divided into 3 groups according to their location. There were 63 cases on the articular side, 41 cases on the bursal side and 20 cases on both sides. The sensitivity of MR-arthrography was 82% for the articular side tears and 11% for the bursal tears. The specificity was 88% for the articular side tears and 100% for the bursal tears. MRarthrographic measurement correctly predicted 72% in 28 repaired cases of 56 articular side partial thickness tears. Conclusions: MR-arthrography may be a reliable tool for diagnosing articular side partial thickness rotator cuff tears, but it has limitations for bursal side tears.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼