http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고성과 작업시스템과 조직몰입 : 다층분석을 통한 조직공정성의 매개효과 검증
권기욱(Kwon, Kiwook),김광현(Kim, Kwanghyun),김종인(Kim, Jongin) 한국인사ㆍ조직학회 2011 한국인사ㆍ조직학회 발표논문집 Vol.2011 No.2
이 연구는 고성과 작업시스템(High Performance Work System)이 조직몰입에 어떠한 영향을 미치는가를 밝히는데 그 목적이 있다. 또한, 사회교환이론(social exchange theory)에 입각하여 조직구성원들이 지각하는 조직공정성이 고성과 작업시스템과 조직몰입의 관계를 매개하는지 여부를 알아보고자 했다. 이를 위해 48개 기업, 404명의 직원들을 대상으로 위계선형모형(Hierarchical Linear Modeling)을 이용해 실증분석하였다. 연구결과 본 연구에서 상정한 가설들은 지지되었으며, 그 구체적인 내용은 다음과 같다. 첫째, 기업의 고성과 작업시스템 도입 및 활용이 내부 구성원의 조직공정성 지각 및 조직몰입에 긍정적인 영향을 미쳤다. 또한, 이 과정에서 조직구성원들의 공정성 지각이 매개(mediation)의 역할을 하는 것을 발견할 수 있었다. 마지막으로, 본 논문의 연구 기여점 및 시사점, 그리고 제한점을 논의하였다. Although much research has been conducted to explore how high performance work systems (HPWS) influence organizational outcomes, research attention to its effects on employee attitudes and behaviors are still lacking regardless of its beneficial influence on individual employees. To fill this research gap, this study examines whether high performance work system (HPWS) is positively related to organizational commitment. Based on social exchange theory, we further investigate how HPWS is linked to such attitudes to discover an underlying mechanism in the relationship. Particularly, we are interested in how overall organizational justice perception mediates the relationship. To test the research model, hierarchical linear modeling analysis was conducted based on data from 404 employees working in 48 organizations. Results demonstrate that HPWS is positively related to organizational commitment and organizational justice perception. In addition, organizational justice is an intervening variable mediating the relationship. Contributions to research and practice and limitations are discussed.
권기욱(Kwon, Kee Wook),김준현(Kim, Jun Hyun) 한국지적정보학회 2011 한국지적정보학회지 Vol.13 No.2
본 연구는 VRS-GPS측위와 토탈스테이션을 연계한 통합측량시스템을 이용하여 지적현황측량의 적용가능성을 위해 수신이 양호한 개활지와 건물밀집지역의 수신장애 지역에서의 서로 다른 두 방법간의 정확도 비교와 함께 전체적인 측량작업공정상의 효율성을 제시하였다. 연구결과 토탈스테이션과 통합측량시스템간의 개활지의 기준점 정확도 비교에서는 X좌표 0.012m, Y좌표 0.018m로 RMSE 오차가 큰 차이가 없었으며, 건물밀집지역의 지적현황측량성과 비교에서는 X좌표 0.0607m, Y좌표 0.0691m의 RMSE 오차가 발생되었다. 또한 효율성 평가에서는 약 1.7배의 차이로 토탈스테이션 측량방법이 장비의 이동이나 장비재설치등에 따른 시간소요가 통합측량시스템에 비해 6배 더 많이 소요되는 것으로 나타났다. This study is to suggest the efficiency in the process of overall surveying work, along with the accuracy comparison of different 2 methods between the open area with good signal receiving and building concentrated area with poor signal receiving for applicability of Cadastral Reconnaissance Surveying using Integrated surveying system working together with VRS-GPS position determination and Total Station. As a result of research, in the comparison of reference point accuracy between Total Station and Integrated surveying system in open area, RMSE error was no big difference with X coordinate 0.012m, Y coordinate 0.018m,, and in the comparison of Cadastral Reconnaissance Surveying in building concentrated area, RMSE error occurred with X coordinate 0.0607m, Y coordinate 0.0691m. In addition, efficiency rating showed 1.7 times difference, and surveying method of total station took approximately 6 times time-consuming, compared to the integrated surveying system, due to taking time of moving and reinstalling equipment.
권기욱(Kwon Kee Wook),김준현(Kim Jun Hyun) 한국지적학회 2014 한국지적학회지 Vol.30 No.3
본 연구에서는 구암원점의 3개 동지역에서 임야지역의 동경계가 약 110m의 이격이 발생되고 있어 이러한 불부합을 해결하기 위해 경사거리, 도곽크기, 도근전개 , 측량오류 등의 비교분석을 통해 불부합 해결방안을 제시하였다. 불부합 원인분석 결과 분석결과 수치지형도의 등고선 파일을 중첩한 경우 노곡동은 토지 및 임야부분이 대부분 일치하였으나, 조야동과 서변동은 임야경계 및 토지경계의 이격량 만큼 불일치되어 나타나고 있어 노곡동의 경계등록이 잘못 작성된 것이 아니라 조야동과 서변동에서 경계등록 과정에서 오류가 있음을 확인 할 수 있었다. 따라서 본 연구에서는 이러한 불부합을 해결하기 위해 수치지형도와 영상, 임야원도와 전산파일을 이용하여 거리관측 비교, 도근전개 및 도곽크기 비교, 경계선 축도 비교 등의 방법을 적용하여 측량당시 100m로 측정하였으나 도면에 등록할 때에는 200m로 잘못 등록된 경계 불부합지를 해결할 수 있었다. In this study, consistent with the comparative analysis of Dong boundary Line of the forest area of about 110m apart in the winter is caused slope distance to solve this discrepancy, map size, minor control deployment, survey error, such as the origin of the three research areas of Guam the proposed maintenance plan. As a result of overlapping contours NOGOK-dong digital map files on the analysis results are consistent, but most of the land and forest land part, the discrepancy appears JOYA-dong and SEOBYEON-dong separated by the amount of forest land border demarcation and border properties are not poorly written and the NOGOK-dong JOYA-dong were able to confirm that there is an error in the registration process, in SEOBYEON-dong boundary. Therefore map size, minor control deployment in the bounds of the cause, but did not clearly identify the error due to observation or survey error in the distance, but due to the 100m to 200m registered benediction error or boundary survey party surveying error when registering on the drawing forest land map you can verify that it is poorly written.
CFD-based Flow Simulation Study of Fuel Cell Protective Gas
권기욱(Kwon, Kiwook),임종구(Lim, Jongkoo),박종철(Park, Jongcheol),신현길(Shin, Hyun Khil) 한국신재생에너지학회 2011 한국신재생에너지학회 학술대회논문집 Vol.2011 No.11
To improve the safety, the fuel cell operate inside a pressurized enclosure which contains inert gas so called protective gas. The protective gas not only prevents the mixture of hydrogen and oxygen, but also removes the water in the vessel with the condenser. This study presents the details of the flow optimization in order to reduce the humidity in the fuel cell housing. The protective gas flow in the fuel cell container is studied by Computational Fluid Dynamics(CFD) simulations. This study focuses on optimizing the geometry of an protective gas circulation system in fuel cell module to reduce the humidity in the vessel. CFD analysis was carried out for an existing model to understand the flow behavior through the fuel cell system. Based on existing model CFD results, geometrical changes like inlet placement, optimization of outlet size, modification of fuel cell module system are carried out, to improve the flow characteristics. The CFD analysis of the optimized model is again carried out and the results show good improvement in protective gas flow behavior.
기체분리막을 이용한 산소부화 연소 공기 제조 방법에 관한 연구
권기욱 ( Kiwook Kwon ),전용우 ( Yong-woo Jeon ),정상철 ( Sang-chul Jung ),전미진 ( Mi-jin Jeon ) 한국폐기물자원순환학회(구 한국폐기물학회) 2020 한국폐기물자원순환학회 추계학술발표논문집 Vol.2020 No.-
폐기물 소각은 매립과 비교하여 획기적인 부피 감량이 가능하며, 소각 시 발생하는 폐열을 재이용 할 수 있는 장점이 있다. 고효율 연소기술 중 하나인 산소부화연소는 연소반응에 필요한 공기중 산소 농도를 21 % 보다 높여 공급하는 방법이다. 산소농도가 높아지면 열의 상당량을 빼앗는 질소의 농도가 상대적으로 감소함에 따라 화염의 온도를 높일 수 있다. 이에 따라 소각 처리용량 증대, 고함수율의 폐기물소각 용이, 저열량 폐기물 소각, 배기가스 발생량 감소, 완전연소로 인한 소각재 중의 탄소성분 감소 등 다양한 장점을 가지고 있다. 신규 폐기물 처리 시설의 부지확보가 어려운 상황에서 규모를 최소화 할 수 있는 장점이 있으며 특히, 폐기물처리 시설을 지하화 할 경우 공사비를 절감할 수 있는 요인이 된다. 공기 중 산소농도를 높이기 위한 방법으로는 심냉법, PSA법, 기체분리막법 등이 있다. 심냉법의 경우 초기 투자 비용이 높고, PSA의 경우 중소 규모로 가능성이 있으나 제조단가가 높은 단점이 있다. 이에 본 연구에서는 비교적 시스템이 간단하고, 운전이 용이한 기체분리막을 이용하여 산소부화연소를 위한 산소농도를 40 % 이상으로 높이기 위한 방법에 대한 연구를 수행하였다. 순수가스를 이용하여 상용 기체분리막들에 대한 투과도와 선택도를 비교하였으며, 혼합가스(공기)를 이용하여 Feed 압력과 stage-cut 변화에 따라 최적 투과 특성을 확인하였다. 또한 기체분리막의 permeate에 감압을 형성하여 기체분리 특성을 비교하였으며, 다단 모듈 구성에 따라 산소농도를 40 % 이상 높일 수 있는 모듈 구성 방법에 대한 연구를 수행하였다.