http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고영대,김성진,김종현,류성옥,방현석,정윤식,박보경,손홍래,Koh, Young-Dae,Kim, Sung-Jin,Kim, Jong-Hyeon,Rheu, Seong-Ok,Bang, Hyeon-Seok,Jeong, Yun-Sik,Park, Bo-Kyeong,Sohn, Hong-Lae 한국진공학회 2008 Applied Science and Convergence Technology Vol.17 No.1
Febry-Perot 프린지 패턴의 광 반사성을 가지고 있는 다공성 실리콘을 이용하여 암호화된 광학 이미지를 제작하였다. 암호화된 광학이미지 다공성 실리콘 샘플은 p-type 실리콘 웨이퍼 (boron-doped,<100> orientation, resistivity $0.8{\sim}1.2m{\Omega}-cm$)를 이용하여 빔 프로젝트의 광원과 전기화학적 식각을 통하여 만들어 졌다. 광학 이미지 다공성 실리콘 샘플은 전기화학적 식각과정에 빔 프로젝트의 광원에 의하여 톡특한 Febry-Perot 프린지 패턴을 나타낸다. 실리콘 웨이퍼의 광 반사성의 프린지 패턴을 퓨리에 변환을 통하여 유효광학두께를 측정하고 실리콘웨이퍼에 암호화 시킨 광학이미지를 제작하였다. Optical images on the porous silicon exhibiting Febry-Perot fringe pattern have been prepared by using an electrochemical etching of p-type silicon wafer (boron-doped,<100> orientation, resistivity $0.8{\sim}1.2m{\Omega}-cm$) and beam projector. The images remained in the substrate displayed an optical images correlating to the optical pattern and could be useful for optical data storage. A decrease in the effective optical thickness of the Febry-Perot layers was observed, indicative of a change in refractive index induced by exposing of porous silicon to the white light. This provides the ability to fabricate complex optical encoding in the surface of silicon.
이중의 광학적 변화를 이용한 다공성 실리콘 가스센서 제작
고영대,김성진,장승현,박철영,손홍래,Koh, Young-Dae,Kim, Sung-Jin,Jang, Seung-Hyun,Park, Cheol-Young,Sohn, Hong-Lae 한국진공학회 2007 Applied Science and Convergence Technology Vol.16 No.2
[ $Febry-P{\acute{e}}rot$ ] 프린지 패턴 (fringe pattern)과 광발광성 (photoluminescence, PL)의 광학적 성질을 동시에 가지고 있는 다공성 실리콘을 이용하여 가스센서를 개발하였다. 다공성 실리콘 샘플은 p-type 실리콘 웨이퍼 (boron-doped, <100> orientation, resistivity $1{\sim}10{\Omega}$)를 이용하여 전기화학적 식각을 통하여 만들어 졌다. 다공성 실리콘 샘플들은 열적 산화 방법과 hydrosilylation 방법을 통하여 그 표면이 수소로 종결된 다공성 실리콘 (Si-H)과 산화된 다공성 실리콘(Si-OH), 두 가지 각각 다른 표면 성질을 갖는 다공성 실리콘을 제작 하였다. 준비된 두 가지 다른 다공성 실리콘 칩들은 메탄올, 아세톤, 헥산, 그리고 톨루엔의 증기에 노출 시켰을 때 Febry-P rot 프린지 패턴의 변화나 PL의 변화를 관측하여 다공성 실리콘을 이용한 VOCs (volatile organic compounds) 센서로서의 응용에 대하여 연구하였다. $Febry-P{\acute{e}}rot$ 프린지 패턴은 유기 물질의 증기압이 클수록 단파장으로 이동하는 폭이 컸고, 광 발광성은 극성도가 큰 물질일수록 소강현상이 크게 일어나는 것을 알 수 있었다. Porous silicon exhibiting dual optical properties, both $Febry-P{\acute{e}}rot$ fringe (optical reflectivity) and photoluminescence had been developed and used as chemical sensors. Porous silicon samples were prepared by an electrochemical etch of p-type silicon wafer (boron-doped, <100> orientation, resistivity ; $1-10{\Omega}cm$). Two different types of porous silicon, fresh porous silicon (Si-H terminated) and oxidized porous silicon (Si-OH terminated)by the thermal oxidation, were prepared. Then the samples were exposed to the vapor of various organics, such as methanol, acetone, hexane, and toluene. Both reflectivity and photoluminescence were simultaneously measured under the exposure of organic vapors for sensing VOC's. These surface-modified samples showed unique respond in both reflectivity and photoluminescence with various organic vapors. While polar molecules exhibit greater quenching photoluminescence, molecules having higher vapor pressure show greater red shift for reflectivity.
눈 초기화 기법에 따른 동아시아 겨울철 계절 예측성 평가
고영대,우성호,박상혁,최자현,이규리,김백민,정지훈 한국기상학회 2021 한국기상학회 학술대회 논문집 Vol.2021 No.10
지구온난화에 따른 유라시아 지역의 지면조건이 변화되고 있으며, 그에 따른 극한 기후 현상이 빈번하게 발생하였다. 유라시아 눈깊이는 여름철 및 겨울철의 동아시아의 기온에 밀접한 관련성이 있는 연구들이 보고되었으며, 이를 토대로 계절 예측의 가능성의 연구도 진행되었다. 이 연구에서는 두 가지 눈 초기화 기법을 이용한 초기조건으로 겨울 계절 예측성을 평가하고자 한다. 초기화 기법은 Koster et al. (2004)의 토양수분 초기화 기법을 토대로 고안된 Jeong et al. (2013)의 재정규화 기법과 누적 분포 함수(CDF)를 이용한 눈초기화 기법을 이용하였다. 이 초기화 연구에는 미국 국립대기연구센터(National Center for Atmospheric Research)의 지구시스템모형인 CESM(Community Earth System Model)의 지면-대기 접합 모델(CAM4-CLM4)을 이용하였다. 두 초기화 기법 결과 모두 계절 예측성능을 향상 시킬 수 있는 잠재 예측성의 향상을 보였다.
고영대,김배진,노수영,오세훈 중앙대학교 미래신기술연구소 2003 미래신기술연구소 논문집 Vol.12 No.1
동력전달용 기어시스템을 원통형 외접 기어보다 더 큰 속도비를 얻을 수 있고 유연한 속도단을 형성하며 소형화에 유리한 유성기어시스템을 이용하여 이러한 요구를 만족시키고 있다. 또한 유성기어 시스템은 유성기어열의 여러 형태에 따라 원하는 감속비와 설계조건들을 얻을 수가 있다. 본 연구에서는 엘리베이터 구동 시스템을 유성기어 감속기로 설계하였다. 요구하는 전체 시스템의 사양을 만족하는 감속기를 설계하였는데 특히 감속비와 강도 설계에 초점을 맞추었다. 왜냐하면 엘리베이터에서 가장 중요한 것은 안전이기 때문이다. 모듈러 유성기어를 이용한 다단 감속기를 설계하였고 유성기어 형태를 적용하여 여러 가지 모듈형식의 유성기어 시스템을 제안하였다. In this study, a new elevator driving system using modular planetary speed reducer is designed in order to get higher efficiency and compact structure. Among various gear systems, planetary gear system has the best characteristics in high efficiency, excellent strength capacity, easy convertible speed control, and compact design aspect. Strength of gear is considered as the most important design factor. In this study, various modules of multistage planetary gear system are proposed and one type is applied to design elevator driving system. These module systems are expected to be applied for many other driving systems.