http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
강일구,Gang, Il-Gu 한국과학기술단체총연합회 1996 과학과 기술 Vol.29 No.1
산학협동연구는 장기적이고 독자적이어야 하는데 지난동안 우리는 극히 단기적인 제품기술이나 생산기술에서의 산학협동에 주력해 왔다. 비교적 과학기술 도입이 늦었던 일본도 이미 1백년 이상의 기반조성이 이루어진 바탕위에서 산학협동이 이루어진 것을 볼때 우리나라도 지속적인 연구개발의 기반 구축이 절대적으로 필요한 것이다. 이 글은 과총주최로 구랍 7일 한국과학기술회관 국제회의장에서 열린 '95 산학협동워크숍에서 강일구씨가 발표한 내용이다.
Fe-Ni 계 합금에서 Ni 함량이 열팽창 및 고온변형거동에 미치는 영향
강일구,김희중,이종현,김학신 대한금속재료학회(대한금속학회) 1991 대한금속·재료학회지 Vol.29 No.12
The thermal expansion and the high temperature deformation behaviors have been studied in the composition range of 0-50% Ni for Fe-Ni binary alloys. With increasing Ni content, the α-γ transformation temperature decreases and the thermal expansion coefficients of α and γ phases decrease above 10% Ni. The thermal expansion coefficients of Fe-Ni alloys with Ni content lower than 30% Ni or greater than 40% Ni are about 10^(-5) but chat of 36% Ni alloy is smaller than 10^(-6). The composition showing the lowest thermal expansion coefficient was dependent on the tested temperature range, and the compositions are 36%, 45% and 27.5% Ni in the temperature range of RT-50℃, 50-200℃ and 200-500℃, respectively. With increasing Ni content the compressive true peak stress and its true peak strain at 1000℃ are increased. The yield stress and the compressive peak stress at 1000℃ reached to the high stresses at 25-30% Ni after a steep .increase at about 20% Ni, and then slightly decreased to 36% Ni. The relation between the true stress and the true strain in the compression test at 1000℃ was of the typical power expression type(σ=Kεⁿ) in the strain hardening region. The strength coefficient and the strain hardening coefficient in 20% Ni are estimated 8㎏/㎟ and 0.29 as the highest values while the coefficients in 36% Ni are 4.62 ㎏/㎟ and 0.1 as the lowest values, respectively.
저온 자장중열처리가 Fe81-xCoxB14C1Si4 계 비정질합금의 자성에 미치는 영향
강일구,김희중,노태환,이명복 대한금속재료학회(대한금속학회) 1988 대한금속·재료학회지 Vol.26 No.10
The effect of low temperature magnetic field annealing on the soft magnetic properties of Fe_(81-x)Co_xB_(14)C₁Si₄(x=0-12) amorphous alloys have been investigated. The crystallization and Curie temperature are not changed with the Co content. By low temperature magnetic field annealing, the magnetic flux density increases and the coercive force and magnetostriction decreases. These effects are discussed in terms of the structural relaxation and the unidirectional induced magnetic anisotropy. The maximum permeability has a inverse relation with magnetostriction. The best magnetic property are obtained by the magnetic field annealing at 375℃ for 2 hours in Fe_(69)Co_(12)B_(14)C₁Si₄amorphous alloy.
강일구,김희중,증본건 대한금속재료학회(대한금속학회) 1987 대한금속·재료학회지 Vol.25 No.5
Alloying effects on the crystallization temperature and the crystallization process of Fe-Cr-C-B alloys were studied by DSC and X-ray diffractometer. The crystallization temperature linearly increased with increasing the concentration of Cr and metalloids. The activation energy for crystallization was in the range of 83-97 ㎉/㏖, and its dependence to composition was similar to that of the crystallization temperature. Three crystallization processes of primary, eutectic and polymorphic were occurred with alloy composition. The final stable crystalline phases were α-(Fe, Cr) (bcc), (Fe, Cr)₃B(orthorhombic) and (Fe, Cr),B (tetragonal) in Fe_(47)Cr_(35)B_(18) alloy, (Fe, Cr)₃(C, B) (orthorhombic) in Fe_(41)Cr_(35)C_(12)B_(12) alloy, and α-(Fe, Cr)(bcc) and (Fe, Cr)₃ (C, B) (orthorhombic) in all Fe-Cr-C-B alloys except Fe_(41)Cr_(35)C_(12)B_(12) alloy.
80Ni-20Cr 저항합금선의 수명 미치는 영향에 대한 고찰
강일구,김순광 대한금속재료학회(대한금속학회) 1971 대한금속·재료학회지 Vol.8 No.4
저항 전열합금과 고온합금으로 널리 쓰이고 있는 80-20 니켈-크롬 합금의 가장 중요한 특성인 수명을 첨가 원소와 조직간의 관계에서 규명하였다. 기본성분은 80% 니켈과 20% 크롬에 알루미늄·실리콘·칼슘·밋슈메탈 등을 적량 첨가하였다. 전해니켈과 순크롬 및 첨가원소를 고주파로에서 용해주조하여 열간압연 냉간신선을 거쳐 0.5㎜직경의 선을 얻었다. 이들 시료에 대해서 기계적 강도·전기저항치를 측정하고 수명치 시험으로서는 1200℃에서 2분간 가열, 2분간 냉각을 파단시까지 계속 반복하였다. 또한 이들에 대해서 현미경 조직을 조사하였다. 여기에서 각종 첨가물원소들이 어떻게 결정성장과 산화피막 형성을 통하여 수명치에 영향을 미치는가를 고찰하였다.