http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
내구성개선제를 첨가한 콘크리트의 내구성 개선특성에 관한 연구
강기병,구경모,김도수,길배수,김규용,김무한 대한건축학회지회연합회 2007 대한건축학회지회연합회 학술발표대회논문집 Vol.2007 No.1
Salt injury and carbonation which is the a blazing primary factor decreasing durability of concrete is fatally based on prior performance lowering of concrete structure, structure stability, and reduction of serviceability limit period. Especially, in the event that chloride is penetrated and spreaded to reinforced concrete structure, salt injury becomes primary factor lowering of durability performance such as crack and popout of concrete due to iron expansion. In this study, after durability improvement agent which strengthens carbonation and salt damage resistance is added to concrete as much as 0.0, 0.3, and 1.0% , engineering properties such as slump flow, air content, and setting time & durability such as compressive strength, cracking state, and chlorine diffusion factor in the watertight concrete are measured. As a result, although durability improvement agent is not effect on engineering properties, it is make sure that durability improvement agent is effective to improve durability because of reduction of carbonation, cracking and diffusion factor of chloride
강기병 ( Kang Ki-byung ),최대규 ( Choi Dae-gyu ),지승구 ( Ji Seung-gu ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.25 No.2
최근 국내 지진의 위협 및 국민적 관심이 높아지는 가운데 건축물 내진율 개선을 위하여 「지진·화산재해대책법」 제16조의3 및 제16조의4에 따라 운영되고 있는 지진안전 시설물 인증제도의 3개년 운영실적을 분석하였다. 또한 국토안전관리원에서 수행한 인증심사의 주요항목을 정리하고 불인증 사유를 분석한 결과 내진성능평가의 부적절한 수행이 상당수를 차지하는 것으로 확인됐고 인증제도의 발전 및 확산을 위하여 내진보강관련 기술자의 역량강화가 필요한 것으로 나타났다.
RBS-B 접합부 설계식 개선에 따른 철골모멘트골조 시스템의 내진성능평가
한상환,강기병,문기훈,황성훈 한국지진공학회 2010 한국지진공학회논문집 Vol.14 No.6
현행 내진설계기준에서 RBS-B 접합부는 오직 중간모켄트골조(IMF) 시스템에서만 사용이 허용된다. 본 연구는 현행설계규준에 따라 설계한 RBS-B 접합부를 갖는 철골 모멘트골조 시스템의 내진성능평가를 수행하였다. 이를 위하여 층수(3층, 6층, 9층), 경간너비(6m, 9m), 내진설계범주(SDC C_{max}, SDC C_{min})으로 구성된 12개의 RBS-B접합부를 갖는 철골모멘트골조 건물을 설계하였고 RBS-B 접합부의 비선형 이력거동을 잘 모사하는 접합부 모델을 개발하였다. 설계된 대상골조는 ATC-63에 의해 개발된 내진성능평가방법에 따라 내진성능평가를 수행하였다. 또한 본 연구는 저자가 이전연구에서 제안한 새로운 설계법에 따라 설계된 IMF 시스템의 내진성능평가를 수행하였다. 그 결과 현행규준에 따라 설계한 몇 개의 대상골조가 적절한 붕괴여유비를 보유하지 못하였다. 반면에 새로운 설계절차에 따라 설계된 대상골조는 적절한 붕괴여유비를 보유하였다. In current seismic design provisions, a reduced beam section with bolted web (RBS-B) connections is only permitted for intermediate moment frames (IMF). This study evaluated the seismic performance of steel moment resisting frame systems having RBS-B connections designed according to current seismic design provisions. For this purpose, 12 archetypal IMF systems having two different span lengths (9m, 6m) were designed considering two design load levels (SDC C_{max}, SDC C_{min}). A nonlinear analytical model that can simulate hysteretic behavior of an RBS-B connection was also developed in this study. The procedures specified in ATC 63 are used to conduct a seismic performance evaluation. Moreover, this study conducts the seismic performance evaluation of IMF systems designed according to a new design method proposed by the authors in the previous study. It was observed that several model frames designed according to current seismic design provisions did not provide satisfactory collapse margin ratios (ACMR). This study also showed that the model frames designed according to the new design procedures had a sufficient ACMR.
압축력을 받는 합성보의 합성률이 휨 강도에 미치는 영향
김승훈,강기병,김태수,이용택 한밭대학교 2008 한밭대학교 논문집 Vol.25 No.-
As construction technology have been developing, structure numbers which construct a building subjected to combined loading. not a loading that have been designed for the past tirres. This study evaluated effect that get on internal force of composite beam by various situation of construction. For example, there would be effect that change internal force of section by degree of shear connection and soil pressure action time. So we need a P-M interaction curve of composite beam section which can evaluate internal force. P-M interaction curve shows a ultimate limits of the internal force of structure numbers subjected to axial force and bending moment. Study for P-M interaction curve design is very important part to design structure numbers. This study designed P-M interaction curve of composite beam that reflect asymmetry and examined internal force of composite beam through P-M interaction curve under various condition. As a result, we could know that P-M interaction curve was increased than existing P-M interaction curve when only axial force acts to steel materials. and proposed more accurate design method that reflects effect of bending strength by the degree of shear connection to existing P-M interaction curve.
민찬기 ( Min Chan-gi ),강기병 ( Kang Ki-byung ),왕형석 ( Wang Hyeong-seok ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.25 No.2
시설물의 내진성능 개선사업이 활발하게 이루어지고 있으나, 내진성능평가 실시자의 전문지식 및 평가방법의 이해 부족으로 내진성능평가 부실이 계속 확인이 되고 있다. 이는 내진보강 산업의 건전성을 저해하고 사업추진에 부정적인 요인이 될 수 있다. 국토안전관리원은 「시설물안전법」에 따라 ‘내진성능평가의 적정성 검토’ 및 ‘내진보강권고 업무’를 객관적이고 합리적으로 수행하기 위하여 ‘내진성능평가 검증을 위한 평가매뉴얼(2019)’을 활용하고 있다. 내진성능평가 검증 매뉴얼에 따라 평가결과에 영향이 큰 주요 항목은 과락항목으로 지정하여 부적절한 내진성능평가의 재수행을 유도한다. 본 논문에서는 기존 건축물에 대한 내진성능평가 검토 결과 사례 중 평가 시 부실 사례가 자주 확인되는 항목에 대해서 확인하였다. 내진성능평가 부실사례에 따른 원인과 문제점을 공유 및 개선하여 내진성능평가자의 원활한 내진성능평가 수행이 이뤄지도록 노력해야 할 것이다.