http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
신경회로망과 점진적 손상 모델링을 이용한 크리프 기공의 평가
조석제,정현조,Jo, Seok-Je,Jeong, Hyeon-Jo 대한기계학회 2000 大韓機械學會論文集A Vol.24 No.2
In order to develop nondestructive techniques for the quantitative estimation of creep damage a series of crept copper samples were prepared and their ultrasonic velocities were measured. Velocities measured in three directions with respect to the loading axis decreased nonlinearly and their anisotropy increased as a function of creep-induced porosity. A progressive damage model was described to explain the void-velocity relationship, including the anisotropy. The comparison of modeling study showed that the creep voids evolved from sphere toward flat oblate spheroid with its minor axis aligned along the stress direction. This model allowed us to determine the average aspect ratio of voids for a given porosity content. A novel technique, the back propagation neural network (BPNN), was applied for estimating the porosity content due to the creep damage. The measured velocities were used to train the BP classifier, and its accuracy was tested on another set of creep samples containing 0 to 0.7 % void content. When the void aspect ratio was used as input parameter together with the velocity data, the NN algorithm provided much better estimation of void content.
유현재,김문수,조석제 韓國海洋大學校電波通信硏究所 1999 電波通信硏究所論文集 Vol.1 No.-
This paper presents an approach which classifys more accurately clusters for the data sets being different size cluster. We have more degree of membership to the large cluster and less degree of membership to the small cluster by the size of cluster. In the proposed algorithm, the internal data in the average intracluster distance was given the degree of membership more than 1. So we assume the data is proper. FCM is given the degree of membership depends on the distance between data and the center of cluster. But in the proposed algorithm, the center searching was improved about different size cluster by giving the degree of membership using the distance from each data to intracluster.
계산기 건반의 조선글 자소배정과 타건속도 모의평가체계에 대하여
조석제,강석량,권오일 에스케이텔레콤 (주) 2001 Telecommunications Review Vol.11 No.1
본 론문에서는 타건속도를 기본지표로 하여 건반에 조선글 자소를 배정하는 문제를 살펴본다. 정보의 평균입구1)속도는 손과 손가락의 운동능력에 맞게 손과 손가락의 실지 운동부하가 고르게 배정되였는가를 1차적으로반영하며 자소의 출현빈도와 2차 련접 출현빈도를 고려하여 자소가 합리적으로 배정되였는가도 반영한다. 이는오랜 시간 동안의 타건수에 따른 육체적 및 정신적 피로 정도가 반영되어 있다고 볼 수 있다. 여러 가지 배치안을평가하기 위해서는 평균 입구속도를 정확히 반영하는 파라메터가 있어야 한다. 출현빈도 문제는 일차적으로 결정되는 통계량이다. 따라서 입구속도를 반영하는 파라메터를 각이한 손가락의 각이한 상황에서의 운동속도에서찾아야 한다. 이에 기초하여 사람의 열 손가락에 대한 타건 속도 지표행렬을 구하고 얻어진 행렬과 조선글 자소의 련접 빈도행렬에 기초하여 자소배정의 우렬을 평가하는 모의평가 방법을 연구하고 프로그람 체계를 개발하였다. 또한 이 두 행렬을 가지고 이미 타건 입구된 문장을 읽어서 각이한 건반자소 배정안에 대한 타건 입구 시간지표를 모의계산하는 체계도 만들어 놓았다. 또한 건반배치 탐색문제를 여러단 문제로 보고 동적계획의 수법으로풀 수 있는 모의체계도 만들어 놓았다.
조석제 평화문제연구소 2001 統一問題硏究 Vol.13 No.2
일본의 군사적 팽창에 관한 주변국가들의 우려는 심각하다. 막강한 경제력을 기반으로 질적, 양적인 팽창을 거듭하는 군사력 앞에 태연할 수 있는 국가란 현실적으로 존재하지 않기 때문이다. 이 글은 일본 방위예산의 이례적인 확대현상에 대한 원인과 배경을 보다 체계적으로 설명하는데 목적을 두었다. 특히 82년도의 방위예산을 대상으로 이상팽창의 구조와 과정을 중심으로 살펴보았다. 우선 첫째는 기존의 논의 추세를 살핌과 동시에 문제점을 확인하여 논의의 서술방향을 잡도록 하였다. 둘째는 방위정책의 제약요인을 중심으로 기존의 논점들을 모아보는 것으로, 셋째는 일반예산의 평균적인 인상율을 상회하는 데 결정적인 역할을 담당하는 추동세력(방위족)을 확인, 이들의 행태에 미치는 동인을 지적하고 동시에 방위족이 행사하는 영향력의 자원을 크게 미국으로부터의 대일 압력(외압)으로 규정하면서 넷째로는 구체적으로 예산의 편성과정에서 이들 양자간의 관계와 전개과정을 살펴보았다. 마지막의 결론부분에서는 결과적으로 동맹관계의 비대칭성에서 파생될 수 있는 점을 염두해 놓고 일본의 확대가능성과 한계를 유추해 내는 것을 우리의 과제로 삼았다.