http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
무선 센서 망에서 실시간 데이터 전송을 위한 멀티캐스팅 방안
박호성(Hosung Park),이정철(Hosung Park),오승민(Seungmin Oh),임용빈(Yongbin Yim),김상하(Sang-Ha Kim) 한국정보과학회 2011 한국정보과학회 학술발표논문집 Vol.38 No.2D
실시간 데이터 멀티캐스팅은 멀티캐스트 그룹 내의 모든 멤버들에게 데이터를 주어진 제한 시간 내에 전송하는 것을 의미한다. 실시간 데이터 멀티캐스팅의 가장 어려운 부분은 소스 노드와 가장 먼 멀티캐스트 멤버에게 실시간 제약조건을 지켜 데이터를 전송하는 것이다. 무선 센서 망에서는 데이터 전송 지연시간이 물리적인 거리에 비례하기 때문이다. 따라서 우리는 소스 노드와 가장 먼 멀티캐스트 멤버와의 거리를 임계 거리 라고 명명한다. 임계 거리는 실시간 데이터 멀티캐스팅에서 가징 중요한 제약조건이 되어야 한다. 다시 말해 소스 노드에서부터 각 멀티캐스트 멤버에게 데이터가 전달되는 각각의 거리는 어떤 이유로도 임계 거리보다 길지 않아야 한다. 그러나 기존의 멀티캐스팅 방안들은 각 멀티캐스트 멤버까지의 데이터 전송 거리보다 멀티캐스팅 전체 비용 절감에 주안점을 두었기 때문에 임계 거리에 관련된 실시간 데이터 전송 제약조건을 만족하기 어렵다. 본 논문에서 우리는 무선 센서 망에서 실시간 데이터 전송을 위한 새로운 멀티캐스팅 방안을 제안한다. 제안 방안은 임계 거리라는 제약사항을 고려하여 멀티캐스트 트리를 구성함으로써 모든 멀티캐스트 멤버들에게 제한 내에 데이터를 전송할 확률을 높여준다. 시뮬레이션 결과는 제안 방안의 실시간 데이터 전송 성공 확률이 기존 멀티캐스팅 방안들에 비해 높음으로 보여준다.
Multicast Protocol for Real-Time Data Dissemination in Wireless Sensor Networks
Hosung Park,Jeongcheol Lee,Soochang Park,Seungmin Oh,Sang-Ha Kim IEEE 2011 IEEE communications letters Vol.15 No.12
<P>Real-time data dissemination to a multicast group is data delivery to each member in the multicast group within the desired time deadline. The hardest aspect of this mission is to enforce the real-time constraint in the communication between a source and the furthest member since an end-to-end delay is proportional to a physical distance in wireless sensor networks. We call it the critical distance. The critical distance should be most important constraint for real-time multicasting. That is, the delivery distance from a source to each member should not be longer than the critical distance even by any reason. However, since the traditional multicast protocols lay the strong emphasis only on the overall communication cost rather than delivery distance to each member, they may violate the real-time constraint related to the critical distance. In this letter, we propose a novel multicast protocol for real-time data dissemination.</P>
Design of Multiple-Edge Protographs for QC LDPC Codes Avoiding Short Inevitable Cycles
Hosung Park,Seokbeom Hong,Jong-Seon No,Dong-Joon Shin IEEE 2013 IEEE transactions on information theory Vol.59 No.7
<P>There have been lots of efforts on the construction of quasi-cyclic (QC) low-density parity-check (LDPC) codes with large girth. However, most of them focus on protographs with single edges and little research has been done for the construction of QC LDPC codes lifted from protographs with multiple (i.e., parallel) edges. Compared to single-edge protographs, multiple-edge protographs have benefits such that QC LDPC codes lifted from them can potentially have larger minimum Hamming distance. In this paper, all subgraph patterns of multiple-edge protographs, which prevent QC LDPC codes from having large girth by inducing inevitable cycles, are fully investigated based on a graph-theoretic approach. By using combinatorial designs, a systematic construction method of multiple-edge protographs is proposed for regular QC LDPC codes with girth at least 12 and another method is proposed for regular QC LDPC codes with girth at least 14. Moreover, a construction algorithm of QC LDPC codes based on certain liftings of multiple-edge protographs is proposed and it is shown that the resulting QC LDPC codes have larger upper bounds on the minimum Hamming distance than those lifted from single-edge protographs. Simulation results are provided to compare the performance of the proposed QC LDPC codes with progressive edge-growth (PEG) LDPC codes and with PEG QC LDPC codes.</P>
정호성(Hosung Jung),박영(Young Park),김주락(Joorak Kim),권삼영(Samyoung Kwon),박현준(Hyunjune Park) 대한전기학회 2006 대한전기학회 학술대회 논문집 Vol.2006 No.7
This paper analyzes impedance convergence characteristics and harmonics of electric locomotives operation and fault condition. To simulate the various fault and operation condition, AT feeding system and various locomotives are modeled using PSCAD/EMTDC. Analysis shows that impedance are converged into protection area in the case of short fault between catenary and rail or catenary and feeder line but in the case of disconnection fault, impedance is rater bigger so protective relay can't detect the fault. Therefore more analysis of overload and high impedance fault caused disconnection fault is needed.
무선 센서 망에서 싱크의 위치정보 획득을 위한 제한된 선형 플러딩 방안
박호성(Hosung Park),김태희(Taehee Kim),진민숙(Min-Sook Jin),이의신(Euisin Lee),삼부바트저릭(Batzorig Sambuu),김상하(Sang-Ha Kim) 한국정보과학회 2008 한국정보과학회 학술발표논문집 Vol.35 No.1
위치 기반 라우팅은 오직 지역적인 위치 정보를 기반으로 데이터를 전송한다. 이 기법은 소스가 목적지의 위치 정보를 알고 있다고 가정하면 에너지 효율적이고 단순하다. 그러나, 무선 센서 망에서 소스는 목적지인 싱크의 위치 정보를 알지 못한다. 따라서 위치 기반 라우팅의 장점을 살리기 위해서는 소스가 효율적으로 싱크의 위치 정보를 미리 획득하는 과정이 필요하다. 본 논문은 무선 망에서 싱크의 위치정보 획득을 위한 제한적인 선형 플러딩 방안을 제안한다. 제안 방안에서 싱크와 소스는 각각 싱크 위치 획득을 위한 메시지를 정해진 방향으로 전송하며, 두 메시지의 교차 지점에 위치한 노드는 소스에게 싱크의 위치 정보를 전송한다. 싱크의 위치 정보를 획득한 소스는 위치 기반 라우팅을 통해 싱크에게 데이터를 전송할 수 있다. 또한 망 내부에 가상 제한 플러딩 지역 구성이라는 추가 방안을 통해 두 메시지의 교차 지점 생성을 보장한다. 우리는 시뮬레이션을 통해 제안 방안이 지금까지의 방안보다 에너지 면에서 효율적이며 신뢰성 있다는 것을 증명한다.