http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
하윤석,이명수,Ha, Yunsok,Yi, Myungsu 대한용접접합학회 2015 대한용접·접합학회지 Vol.33 No.3
A very large shell-structure built in shipyards like ship hulls or offshore structures are joined by welding through full process. As the welding contains a high thermal cycle at a local area, the welded structures should be distorted unavoidably. Because a distorted ship block should be revised to the designed value before the next stage, the ability to predict and to control the weld distortion is an accuracy level of the yard itself. Despite the ship block size, several present thermal distortion methodologies can deal those sizes, but it is a different story to deal full ship size model. Even a fully constructed ship hull not remaining any welding can have an accuracy issue like outfitting installation problems. Any present thermal distortion methodology cannot accept this size for its recommended element size and the number. The ordinary welding breadth at erection stage is about 20~40 mm. It can hardly be a good choice to make finite element model of these sizes considering human effort and computational environment. The finite element model for structure analysis of a ship hull is prepared at front-end engineering design stage which is the first process of the project. The element size of the model is as fine as the longitudinal space, and it is not proper to obtain a weld distortion at the erection stage. In this study, a methodology is suggested that a weldment can be shrunk at original place instead of using structural finite element model. We cut the original shell elements at erection weld-line and put truss elements between the edges of cut elements for weld shrinkage. Additional truss elements are used to facsimile transverse weld shrinkage which cannot be from the weld-line truss element shrink. They attach to weld-line truss element like twigs from barks. The capacity of developed elements is verified through an accuracy check of erection process of a container vessel at the apt. hull. It can be a useful tool for verifying a centering accuracy after renew and for block-separating planning considering accuracy.
쉘 요소를 이용한 K및 X개선 용접구조물의 열변형 해석방법에 관한 연구
하윤석,최지원,Ha, Yunsok,Choi, Jiwon 대한용접접합학회 2012 대한용접·접합학회지 Vol.30 No.6
Because ships and offshore structures have very large dimensions and complicated shapes, it is difficult to determine the deformation or internal stress in the structure by simple lab tests. Thus, a rigorous analysis by using the computer simulation technology is essential for obtaining their distortions by considering the entire production process characteristics. The rapid development of computer technology made it possible to analyze the heat transfer phenomena, deformation and phase transformation in the welded joint. For large shell structures, shell elements modeling contributed primarily to this development. But if a welding is done by multi-pass, shell elements whose thickness are unchangeable can hard to describe the local situation. Recently, it was researched how to introduce the imaginary temperature for V grooved multi-layer butt welding in strain-boundary method (a kind of shrinkage methodologies). In the present study, we formulated the imaginary temperature for the double bevel and double V groove by considering the thickness change of each pass through the bead and the thickness directions simultaneously and also demonstrated the feasibility of the formula by applying it to the thermal distortion analysis of the erection process of crane pedestal.
MS Point 저감 용접재에 적용한 냉각시 용접부 열변형률 분석에 관한 연구
하윤석,남성길,박세진,권창길,Ha, Yunsok,Nam, Seongkil,Park, Sejin,Kwon, Changgil 대한용접접합학회 2013 대한용접·접합학회지 Vol.31 No.6
This study targets to make clear the connection between MS (Martensite start) point and welding shrinkage. We approved that a Martensite-transformed weldment may not yield state under low MS point, but also admitted the limitation of numerical calculation by inherent strain approach or thermal strain approach. Therefore, new thermal strain formulae during cooling stages were made. As a thermal strain is obtained by integrating thermal extension coefficient, a constant of integration should be decided. In our suggested formulae, the origin was based on totally remained austenite, and added strain from volume changes in Martensite transformation was based on totally transformed ferrite. Through the suggested methodology, It is verified that an MS point under a critical temperature can let weld shrinkage relax and the critical value can be obtained. For supporting this process, 15 weld-consumables were made, were tested by fillet type and were measured. As a result, a positive correlation between MS point and level of weld-distortion was obtained, but it was rather weak.
용접구조물의 변형 최소화를 위한 최적 용접순서의 해석적 방법
하윤석,Ha, Yunsok 대한용접접합학회 2013 대한용접·접합학회지 Vol.31 No.3
Several methodologies analyzing welding distortions of large shell structures like ship blocks have been developed and utilized in shipyards for a long times ago. In general, one of objects of thermal distortion analysis is to find welding sequence making least-deformation without any suppliance, and it can be solved easily and rapidly by EP strain-boundary method. But after assembly construction, there are usually more than 10 weldments in each process, and the number of sequence will follow the Factorial calculation. In this research, a method has been suggested to decide the best welding sequence by minimum analysis. Using this method, welding deformation could be reduced just analyzing some cases as many as the number of weldments. Experiments and Analysis of all cases were also done, and their best results are good agreements with predictation by suggested methodology.