http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최형도,정인범,Choi, Hyeong-Do,Jung, In-Bum 한국정보통신학회 2013 한국정보통신학회논문지 Vol.17 No.12
모든 것이 간소화되고 축약되는 시대가 도래하고 있다. 이것은 마크 웨버가 유비쿼터스 세상을 언급한 이래로 현재는 스마트폰을 통해 시대의 흐름을 살펴볼 수 있다. 이러한 시대의 흐름으로 미루어 볼 때, 미래에는 더 발전된 형태로 진화할 것이라고 예측할 수 있다. 그 진화방향은 여러 가지가 있지만, 그 중 하나는 모든 것을 버튼화 시키는 것이다. 이에 대한 연구로 MIT MEDIALAB의 MaKey는 그 가능성을 보여준다. 본 연구는 이러한 모든 것을 버튼화 시키는 연구의 응용으로 u-Button을 활용한 스마트 조명 제어 시스템을 제안한다. 실제 구현을 위해 MICAz와 각종 센서로 구성된 버튼역할의 u-Button모듈과 LED모듈 ZigBeX로 이루어진 Actuator Node를 제작하였다. Everything has been simplified and abbreviated. The stream of times can be found through the smart phones since the ubiquitous world has be mentioned by Mark Webber. Judging by the flow of times, it's easy to predict that it will be more developed in the future. There are several ways of the development and one of them is to click a button in everything. For this study, the MaKey of MIT MELIALAB shows the possibility. As applying the study of clicking a button in everything, this paper proposes the Smart Lighting Control System using the u-Button. For the actual implementation, u-Button Module with MICAz and various sensors, Actuator Node composed of ZigBeX and LED Module are produced.
최형도,이애경,조광윤,오학태 한국전자파학회 2001 한국전자파학회논문지 Vol.12 No.7
최근, 휴대전화로부터 복사되는 전자파 노출에 대한 건강 위험성에 관한 국민적 관심이 높아지고 있고, 그에 따라 휴대전화가 전자파 인체보호기준의 적합성 여부를 평가하기 위한 전자파흡수율 측정 방법이 제안되어 왔다. 피시험기기인 휴대전화에 대한 국부 전자파흡수율은 전기장 프로브를 사용하여 모의조직으로 채워진 모의 인체 두부에서 전기장 분포를 측정함으로써 얻어진다. 전자파흡수율 측정에 요소가 되는 전기장 프로브, 모의인체의 형상과 크기, 모의조직의 전기정수 그리고 시험위치 등에 따라 측정값이 달라지므로 전자파흡수율 측정 기준을 설정하기 위해서는 이들 요소에 대한 연구가 요구된다. 본 논문에서는 휴대전화의 시험위치에 따른 전자 파흡수율 변화를 수치해석과 측정을 통해 분석하였으며, 통상 사용위치에서 최악의 조건을 조사하였다. 본 결과를 바탕으로 국내 전자파흡수율 측정 기준의 시험위치로서 접촉위치와 경사위치를 채택하였다. There has been an increase in the public concern about possible health risks by electromagnetic exposure from mobile phones. Recently, several SAR measurement procedures have been proposed to demonstrate the compliance of mobile phone with safety limits. To determine the maximum localized SAR of a test mobile phone, the electric field distribution is measured in the head phantom with simulated tissue liquid using the probe The important parameters in SAR measurement are the E-field probe, the shape and size of phantom, the electrical parameters of simulated tissue liquid, and test position, etc. Therefore, in order to setup the measurement standard, the studies on these factors are required. In this paper, the effects of the maximum localized SAR on the test positions of mobile phones were analyzed by the numerical computation and the SAR measurement. From the results, the worst condition of commonly used positions was determined and the touch and tilted positions were adopted as test positions of the domestic SAR measurement standard.
최형도,이애경,Choi, H.D.,Lee, A.K. 한국전자통신연구원 2006 전자통신동향분석 Vol.21 No.4
일상생활에서 전자파의 사용이 급증함에 따라 국민들의 전자파에 대한 건강상의 심각한 잠재적 위험성에 대한 관심과 우려가 증가하고 있고, 다른 기기의 오동작 등 전자파환경 문제가 사회적 문제로 대두되고 있다. 전자파에 대한 올바른 이해와 막연한 불안감 해소를 위하여 전자파 환경기술에 대해 전자파 장해와 인체영향 분야로 나누어 살펴보았다. 먼저, 전자파 장해 관련 기술은 규제 차원의 제도적인 문제와 시험 및 대책을 위한 전자파 측정과 대책 설계 등의 해석 기술을 다루었으며, 전자파 인체영향은 잠재적 위험성에 대한 예방정책의 일환인 인체보호기준과 이에 대한 생물학적 근거, 그리고 전반적인 연구분야에 대해 설명하였다. 끝으로 전자파로부터 안전한 전자기기 이용환경을 실현하기 위한 정책 방향에 대해서 제시하였다.