http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
모델 기준 적응 시스템(MRAS) 부하 토크 관측기를 이용한 유도 전동기의 속도 제어
조문택,이충식,이세훈,Cho, Moon-Taek,Lee, Chung-Sik,Lee, Se-Hun 한국융합신호처리학회 2007 융합신호처리학회 논문지 (JISPS) Vol.8 No.2
본 논문은 유도전동기의 센서리스 속도제어기에 대한 연구이다. 유도전동기의 속도의 제어방법은 자속추정을 위한 기준모델로써 부하-토크 관측기를 이용한 MRAS(Model Reference Adaptive System)를 기초로 하였으며, 전형적인 MRAS 제어기 특성의 속도응답은 부하 토크 외란의 변화에 영향을 미친다. 따라서 제안된 시스템에서의 부하-토크 관측기를 사용한 속도제어 특성은 부하 토크 외란에 의한 영향을 받지 않는다. 이러한 제어 알고리즘을 MATLAB의 SIMULINK를 통해 전체 시스템을 모델링하여 시뮬레이션 한 결과는 유도 전동기의 다양한 부하 구동 적용에 대한 슬라이딩 속도 제어기의 효과적인 개선이 되었음을 알 수 있었다. 그러므로 이러한 제어 방법들이 산업 응용분야에 확대되어 적용되었으면 한다. This paper investigates a speed sensorless control of induction motor. The control strategy is based on MRAS(Model Reference Adaptive System) using load-torque observer as a reference model for flux estimation. The speed response of conventional MRAS controller characteristics is affected by variations of load torque disturbance. In the proposed system, the speed control characteristics using a load-torque observer control isn't affected by a load torque disturbance. Control algorithm that propose whole system through MATLAB SIMULINK because do modelling simulation result are presented to prove the effectiveness of the adaptive sliding mode controller for the drive variable load of induction motor. Therefore we hope to be extended in industrial application.
병원내 온도와 습도조절을 위한 태양광 발전 시스템 설계
조문택(Moontaek Cho),이충식(Chungsik Lee),백종무(Jongmu Baek) 한국방사선학회 2011 한국방사선학회 논문지 Vol.5 No.3
본 논문에서는 온도와 습도 및 냉·난방을 조절하여 건물 내의 쾌적한 환경을 제공하기 위한 승압쵸퍼와 PWM 전압형 인버터로 구성된 태양광 발전 시스템을 제안하였다. 이 시스템은 안정된 변조를 위해 원칩 마이크로프로세서를 사 용하여 동기신호와 제어신호로 처리하였다. PWM 전압형 인버터와 위상의 동기를 위하여 계통전압을 검출하여 계통전압과 인버터 출력을 동상 운전하므로 잉여전력을 연계할 수 있게 하였으며, 건물이나 병원 등 특정 건물의 온도 및 습도센서에 적용하여 양호한 동특성을 얻을 수 있었다. 또한 시스템에 적용한 결과 고역률과 저고조파 출력을 유지함으로써 부하와 계통에 전력이 안정하게 공급될 수 있도록 제어하여 좋은 결과를 얻을 수 있었다. In this paper we propose an improved PV generation systems. Improved systems for temperature and humidity controlled heating and air conditioning offers a pleasant environment within the building, set up chopper and consists of a PWM voltage type inverter. The proposed system is stable modulation for a one-chip microprocessor using the synchronous signal and control signals was treated. The proposed system is a PWM voltage type inverter and phase of the synchronous to the grid voltage to detect the system voltage and inverter output to drive the statue, so surplus power to connection was able to, certain buildings such as buildings or hospitals, temperature and humidity sensor is applied to the good dynamic characteristic could be obtained. In addition, the system was applied to the high power factor and low-frequency harmonics by maintaining the output load and grid to power to be supplied to a stable control could get a good result.
조문택(Moontaek Cho),홍봉화(Bongwha Hong) 한국정보기술학회 2014 한국정보기술학회논문지 Vol.12 No.5
The purpose of this paper is to verify the appropriation of power electronics circuit by applying the most powerful and widely used simulator ORCAD/PSPICE and MATLAB/SIMULINK for adapted variable control technics. Power semiconductor macro modeled by SIMULINK such as diode, thyristor, transistor. Loads are modeled by SIMULINK such as a resistor, inductor, DC motor and AC induction motor. Furthermore DC motor & AC induction motor are modeled by PSPICE through their algorithms. For proved these modelings accurate, simulation techniques which are generally used in the field of power electronics circuits are adapted in power electronics and systems. As a results, the characteristics of micro IGBT model device and macro IGBT model in cycloconverter are almost identical to the result of actual experiments. And, speed sensorless vector control of induction motor algorithms are modeled by taking use of closed loop and SIMULINK modeling simulation are almost same.
조문택(Moon-Taek Cho),송호빈(Ho-Bin Song),김영춘(Young-Chun Kim),백동현(Dong-Hyun Baek),황락훈(Lak-Hoon Hwang),백종무(Jong-Mu Baek),조건식(Gun-Sik Cho) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.7
Worldwide problem, due to the depletion of energy to power more efficient use of the same capacity to improvise for the use of LED brightness is growing. Recent advances in LED technology have lead to LEDs' widespread use in outdoor-signal applications, such as in traffic and railroad signals. Likewise, for large system design and production of issues leading to the simulation should be performed with less effort than to create a system that is reliable. In this paper a wide field of use to more accurately simulate a LED, and easy to use PSPICE can be used as general-purpose use of the LED device modeling. According to a particular LED, the device easy to use basic input variables to the values of library. In order to determine the behavior of the library to provide basic diode device, compared with PSPICE simulations confirm the accuracy of the simulation was performed.
전동기 구동용 전력 변환기에 대한 전력소자의 열적 특성 해석
조문택(Moontaek Cho),이충식(Chungsik Lee),이상복(SangBock Lee) 한국방사선학회 2012 한국방사선학회 논문지 Vol.6 No.6
논문에서는 전력용반도체 소자의 수명예측으로 기초적인 동작환경과 구동시간들을 기록하였다. 전력변환기의 제어기에 의하여 전력소자의 구동시간과 방렬기의 온도 등 동작환경을 누적하여 기록하고 이를 확인할 수 있도록 하므로써 전력용 반도체소자는 그 구조에서 수명은 반도체 칩의 온도변화의 크기와 반복회수로 사용기간을 보증하고 있으므로 이에 의한 수명의 예측으로 유지보수 또는 교체가 적절한 시점에서 이루어질 수 있다고 판단된다. In this paper, the basic behavior of the environment and the driving time as a prediction of the lifetime of the power semiconductor devices were recorded. Radiator of a power device driving time and temperature operating environment, including cumulative record by the controller of the power converter, and doing it so you can see the power semiconductor devices for the life of the structure that the size of the change in the temperature of the semiconductor chip and the number of iterations to maintenance warranty period because of a lifetime by forecasting or replacement can be made at the appropriate time that is considered.
조문택(Moon-Taek Cho),송호빈(Ho-Bin Song),백동현(Dong-Hyun Baek),김영춘(Young-Chun Kim),백종무(Jong-Mu Baek),조건식(Gun-Sik Cho) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.7
In the previous study using pspice for pv systems modeling and simulation were performed.. In this paper, the most commonly used with PSPICE simulations using Matlab simulation tools, one of the solar system even easier to implement was modeled using simulink. If you use this control in the field is more diverse and accurate simulation and to implement it in a real system that can reduce trial and error will be able to get good simulation results.
조문택(Moon-Taek Cho),이세훈(Se-Hun Lee),이충식(Chung-Sik Lee),김영춘(Young-Chun Kim),김은기(Eun-Gi Kim) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.7
2DOF is applied to induction moor in order to supply these weak points of PI speed control method in this paper. and proposed method utilize the combination of the voltage model based on stator equivalent model and the current model based on rotor equivalent model, which enables stable estimation of rotor flux. And it also emphasizes the improvement of the control characteristics in low speed region where established schemes have many problems. To prove the propriety of this paper, the various simulations carried out adequacy and stability using Matlab, and at the same time real system is made, so it is proved. As the results of embodying the system, the robust system is realized.
조문택(Moon-Taek Cho),정형근(Houng-Kun Joung),송호빈(Ho-Bin Song),김영춘(Young-Chun Kim),이충식(Chung-Sik Lee),이세훈(Se-Hun Lee) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.7
본 논문에서는 선형시스템 및 비선형 시스템에서 안정도와 강인성의 설계조건을 만족시키는 리아프노프 함수를 이용하여 유도전동기 안정도를 판별하고 모델기준제어시스템을 이용하여 제어백터 동조파라미터를 얻어 유도 전동기를 제어하는 방법을 제안한다. 이러한 설계 방법은, 설계요건 뿐만 아니라 제어기 고유의 안정도와 강인성까지 만족시키는 제어기를 제공하므로 매우 유용하다.
공간벡터 PWM 방식을 이용한 태양광 발전 시스템 제어
조문택 ( Moontaek Cho ),최혜길 ( Haegill Choi ),이충식 ( Chungsik Lee ),백종무 ( Jongmu Baek ) 한국방사선학회 2010 한국방사선학회 논문지 Vol.4 No.3
본 논문에서는 태양광 발전시스템을 이용한 PWM(Pulse Width Modulation) 전압형 인버터를 전력변환기로 구성하였고, 안정된 변조를 위해서 동기신호와 제어신호를 56F8323 마이크로프로세서에 의해서 처리하였다. PWM 전압형 인버터는 태양전지가 연속 발전할 수 없는 단점을 보완하기 위해 일반 상용전원과 연계함으로써 약 10~20[%]의 전력 절감 효과를 얻을 수 있는 에너지 절약 전원 복합형 전력변환장치로 구성하였다. 그리고 PWM 전압형 인버터와 위상동기를 위해서 계통전압을 검출하고 계통전압과 인버터 출력을 동상 운전하므로 잉여전력을 계통과 연계할 수 있게 하였다. 또한, 고조파를 절감한 출력을 유지함으로써 부하와 계통에 전력이 안정하게 공급될 수 있도록 제어 시스템을 적용하여 좋은 결과를 얻을 수 있었다. In this paper, a photovoltaic system is designed with PWM(Pulse Width Modulation) voltage source inverter. Proposed synchronous signal and control signal was processed by 56F8323 microprocessor for stable modulation. The PWM voltage source inverter using inverter consists of complex type of electric power converter to compensate for the defect, that is solar cell cannot be developed continuously by connecting with the source of electric power for ordinary use. It can cause the effect of saving electric power, from 10 to 20[%]. The PWM voltage source inverter operates in situation that its output voltage is in same phase with the utility voltage. In addition, I connected extra power to the system through operation the system voltage and inverter power in a synchronized way by extracting the system voltage so that the phase of the system and PWM voltage inverter can be synchronized. In the system of this research showed good results after being controlled in order to provide stable power to the load and the system through maintaining and low output power of harmonics.