http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
세라믹-금속 브레이징 접합조인트의 고온 접합강도에 관한 연구
이수정,정명영,이대길,구형회,Lee, Su-Jeong,Jeong, Myung-Yeong,Lee, Dai-Gil,Goo, Hyung-Hoi 대한기계학회 1996 大韓機械學會論文集A Vol.20 No.2
Four point bending tests of the brazed joint composed of sintered silicon nitride and 0.2% carbon steel with Cusil ABA filler which were fabricated at 86$0^{\circ}C$ were performed at temperatures, 25, 100, 200, 300, 400, 50$0^{\circ}C$ From the experiments, the maximum bending strength was measured at 30$0^{\circ}C$ From the 3D FE analysis of the residual stress of the brazed joint, it was revealed that the thermally induced residual stresses were minimized when the environmental temperature was 35$0^{\circ}C$ Considering the degradation of the filler material at high temperatures, it was calculated that the maximum bending strength of the brazed joint occured just below the temperature of the minimum thermal residual stress and the thermal residual stress was the dominative parameter of the brazed joint.
수복재료와 내가동연결장치가 IMZ 임프란트 보철물의 충격흡수효과에 미치는 영향
이수정,정찬목,전영찬,Lee, Su-Jeong,Chung, Chan-Mo,Jeon, Young-Chan 대한치과보철학회 1997 대한치과보철학회지 Vol.35 No.1
The purpose of this study was to evaluate the shock absorbing effect of 4 restorative materials and intramobile connector. The damping effect of four restorative materials used to veneer test crown rigidly connected to IMZ implant and subjected to an impact force was measured. These materials included a gold alloy(stabilor G) : a noble metal ceramic alloy(Degudent H) : porcelain(Duceram) : composite resin(Dentacolor). In addition, this study compared damping effect of same restoretive materials after using polyoxymethylene intramobile connector(POM IMC). The result of this study suggest that : In case of using metal IMC 1. Veneered composite resin(group IV) reduced the impact force by 75%, when compared to an equivalent thickness of porcelain(group III). Group IV reduced the impact force by 87% and 89%, respectively, when compared to Stabilor G(group I) and Degudent H(group II). 2. The impact force recorded was higher for the alloy with the higher elastic modulus.(Stabilor G, group I, Young's modulus 107 Gpa, versus Degudent H, Group II, Young's modulus 95 Gpa) 3. It took the longest time for composite resin veneered group(IV) to reach to peak force when compared group I, II, III. In case of using POM IMC 4. The mean impact force recorded were reduced by 79%(group I), 78%(group II), 69%(group III), 84%(group IV), respectively, when compared to using metal IMC. 5. The time required to reach the peak force were increased by 78%(group I, II) 87%(group III), 34%(group IV), respectively, when compared to using metal IMC>.
연구용 CAD툴에 의한 소형 MPU의 설계 및 파이프라인화의 고찰
이수정,박도순,송낙윤,Lee, Su-Jeong,Park, Do-Sun,Song, Nak-Yun 한국정보처리학회 1994 정보처리논문지 Vol.1 No.4
본 논문에서는 연구용 VHDL 및 CAD 툴을 사용하여 톱다운 설계방식에 의하여 소 형 마이크로프로세서(MPU;microprocessor unit)의 설계를 수행한다. 이를 위하여 기본 MPU와 이의 파이프라인화 구조를 제안한다. 설계목표와 명령어, 아키텍쳐가 결정되면, 이를 우선 C 언어로 모의실험하여 동작을 확인하며, 다음 VHDL 모의실험의 경우, 주어 진 입력에 대하여 내부 레지스터의 내용을 점검하여 동작을 확인한다. 다음에, 이를 연구용 CAD 툴에 의해 완전주문형(full-custom)/반주문형(semi-custom) 설계방식에 의해 레이아웃을 수행하며 관련 모의 실험을 수행한다. 이어 성능개선을 위하여 제안 한 파이프라인 구조를 모의실험을 통하여 타당성을 확인하며 아울러 관련 문제점 및 향후 연구방향에 관해 논한다. 결론적으로, 본 논문을 통하여 MPU의 설계방법을 정립 하였으며, 아울러 성능개선을 위한 아키텍쳐의 설계변화가 가능하였다. In this paper, design of small microprocessor unit is implemented using research purpose VHDL and CAD tools by top-down design method. For this, original basic MPU and its pipelining architectures are suggested. Once, design target, instruction sets, architecture are decided, the operation is confirmed by C language simulation, and then the operation is confirmed by checking internal register contents for given inputs in the case of VHDL simulation. Then, design layouts are made by full/semi-custom design methods by research CAD tools and related simulation is implemented. The feasibility of suggested pipelined structure for performance improvement is confirmed by simulation, and related problems and future research directions are discussed. In conclusion, the MPU design methodology is set up and the design change of architecture is possible by this paper.
Nd:YAG 레이저 조사시 치근면에 미치는 효과에 관한 주사전자현미경적 연구
이수정,김수아,서석란,김형섭,Lee, Su-Jeong,Kim, Soo-Ah,Seo, Seok-Ran,Kim, Hyung-Seop 대한치주과학회 1997 Journal of Periodontal & Implant Science Vol.27 No.3
The purpose of this study was to evaluate the in vitro effects of Nd:YAG laser irradiation on removal of a root surface smear layer after root planing in comparison with Tetracycline HCl. The 60 extracted human teeth due to severe periodontal disease were vigorously scaled and root planed with Gracey curet. Thirty specimen($5{\times}5{\times}2mm$) were obtained from root planed surface of 30 human teeth and assigned randomly to one of three groups : root planed group(5 specimen), Tetracycline HCI group(5 specimen, burnished for 5 minutes), and Nd:YAG laser group(25 specimen, German Dental Laser, Fotona Twinlight). Nd:YAG laser group was divided into 4 subgroups according to power of 1W, 1.5W, 2W, 3W at frequency to 10Hz. The specimen were then fixed, and examed by Scanning electron microscopic study. 30 of 60 human teeth used to measurement of the intrapulpal temperature rise during laser irradiation. Laser-irradiated surface exhibited various surface texture from relative flat surface to irregular surface with patent dentinal tubules of various shape and size. In some area, the root surface alteration which are carbonization, pit and crater formation and melting and resolidification were observed. The number of exposed dentinal tubules per unit($100_{\mu}m^2$) on tetracycline HCI group was more than that in the laser group below 1.5W of power(150mJ/pulse) and was significantly less than that in laser group above 2W of power(200mJ/pulse)(P<0.OOl). As power increased the intrapulpal temperature rise also increased. The result suggested that the parameter which effectively remove root surface smear layer than tetracycline HCI may cause thermal damage to pulp and root surface alteration result from laser exposure would indicate need for additional instrumentation. Thus, Nd:YAG laser irradiation in these parameter may not be appropriate for clinical use as adjunct to conventional periodontal therapy.
대건중탕 및 쑥뜸치료로 호전된 간세포암 환자의 암성 통증 1례
이수정,하정빈,유재환,Lee, Su-jung,Ha, Jeong-been,Lew, Jae-hwan 대한암한의학회 2020 大韓癌韓醫學會誌 Vol.25 No.2
Objective: Most cancer patients suffer from various forms of pain. This study presents the case of a patient with hapatocellular carcinoma with abdominal pain treated by Daegunjoong-tang. Method: For 7 days, the patient was treated with Daegunjoong-Tang and Moxibustion. We planned to maintain moxibustion CV12(中脘), CV4(關元) for 20 minutes everyday. To evaluate the therapeutic effect, we used Visual Analogue Scale (VAS) and Clinical Opiate Withdrawal Scale (COWS). Results: After the treatments, Visual Analogue Scale (VAS) and Clinical Opiate Withdrawal Scale (COWS) score about abdominal pain are decreased. Conclusions: These results suggested that Daegunjoong-tang and Moxibustion have a beneficial effect on relieving abdominal pain caused by cancer.
Texture Electron Diffraction Pattern에 의한 결정구조 해석
이수정,주형태,김윤중,문희수,Lee, Su-Jeong,Jou, Hyeong-Tae,Kim, Youn-Joong,Moon, Hi-Soo 한국현미경학회 2002 Applied microscopy Vol.32 No.3
Texture electron diffraction pattern을 이용한 결정구조 해석 이론은 러시아어로 씌여졌거나, 영문판 저서의 일부에 간단히 소개 되어있어 이해에 어려움이 있다. 이들의 이론은 벡터의 이론과 관련된 여러 관계식을 이용해서 설명될 수 있으며, 이로서 몇 개의 식에 포함된 오류를 수정하였다. The works of texture electron diffraction patterns for crystal structure analysis are written in Russian or introduced briefly in books written in English, which makes it difficult to be understood. In addition to working out the equations, vector theory corrects some errors included in the established formulas for texture electron diffraction patterns.
이수정,Lee, Su-Jeong 한국대학교육협의회 1999 大學敎育 Vol.97 No.-
IMF로 상징되는 '한국의 추락'을 겪으면서 '전 존재의 경제화'라는 경향을 섬뜩한 심정으로 지켜보고 있다. 이것을 방치할 경우 맞이할 또 다른 위기가 손에 잡힐 듯 보이지만 이미 '대학'도 '교육'도 '철학'도 떨어진 낙엽처럼 짓밟히고 있다. 세상은 이것들을 더 이상 '존경'하지 않는다. 그래도 이것들이 '숭고한' 어떤 것이라 믿고 매진해 온 사람들은 그 이념을 버리지 못하고 오늘도 고민한다. 살다보면 언젠가 철학의 목소리가 아쉬워 인터뷰를 요청해 올 날이 있을지도 모른다. 그 때를 위한 예행연습 한 토막을 적어 본다.