http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이덕출 대한전기학회 1976 전기의 세계 Vol.25 No.6
근대산업의 에너지원으로서 전력수요의 급격한 증대에 수반하여 전력계통의 초고전압화, 관련기기의 소형화 및 장기간에 걸친 성능의 안정성, 신뢰성이 절실히 요망 하겠금 되었다. 이로 인하여 전기절욘재료에 요구되는 제성능도 일반적으로 고도화되고 점점 가혹한 조건이 부가되고 있는 실정이라 하겠다. 근년 고분자화학의 급속한 진보와 고분자성형기술의 발달에 의하여 등장한 합성고분자재료는 그 물리, 화학적 성질 특히 전기적 성질에 많은 특징을 가지고 있으며 그 성능이 점점 높이 평가되고 있어 고분자재료의 진출이야말로 전기기기절연의 양상에 일대 변화를 줄것이라 하여도 지나친 표현이 아니겠다. 이와같이 고분자가 전기절연재료로써의 가치는 물가구조로 부터 기대되는 우수한 유전성과 전기절연성이 높이 평가되고 있는 점이라 하겠다.
이덕출 대한전기학회 1977 전기의 세계 Vol.26 No.4
The main purpose of this paper is to study on the nature of the traps in polymer. The polyethlene is typical of polymer material as to be selected for a sample. The current I$_{th}$ are obtained with an small external bias voltage from high density polyethylene which have been treated by the high-field application. Two peaks, P$_{1}$ and P$_{2}$ with maxima near 85.deg. C, respectively, appeared on the current I$_{th}$ spectrum. From the results of experiment, It is clear that The current I$_{th}$ arises from the drift, under the external field, of carriers released from the trap sites by the heating and the trap is surrounded by a potential barrier and trapping proceeds during the high-field treatment. The obtained results can suggest that polyethylene contains trap sites which have an important role in the electrical conduction and breakdown of polymeric materials.rials.
실온부근에서 진공중과 공기중 포리에티렌의 전기전도의 상이에 대하여 - 해외논문소개
이덕출 대한전기학회 1979 전기의 세계 Vol.28 No.6
이글은 일본전기학회법 45-39 Vol.90, No.4에 실린 논문이다.
이덕출 대한전기학회 1980 전기의 세계 Vol.29 No.10
본고의 내용은 다음과 같다. 1. 일렉트렉트의 정의 2. 일렉트렉트의 분류 3. 일렉트렉트의 생성기구 개요 4. 일렉트렉트의 열분석 5. 일렉트렉트의 응용
플라즈마 공중합 MMA-스틸렌 박막의 전기적 특성에 관한 연구
이덕출,박구범 한국전기전자재료학회 1991 電氣電子材料學會誌 Vol.4 No.3
본 연구에서는 플라즈마공중합(메틸메타아크릴레이트 + 스틸렌) 박막의 전기적 특성을 도전전류, 고전계전기전도기구, TSC, 등의 측정을 통하여 분석하였다. 박막의 도전전류는 진공중 열처리에 의해 감소되고 아르곤 플라즈마처리 및 산화에 의해 증가 하였다. 고전계전기전도기구는 전자성전도중 공간전하제한전류형과 잘 일치하였다. 열자극전류 특성에서 두개의 피크 P$_{1}$, P$_{2}$가 관측되었으며 이는 쌍극자의 탈분극에 의한 것으로 사료되며 열처리에 의해 열자극전류는 감소하였다.
저전계영역에서 M$_{1}$-P-M$_{2}$형 고분자재료의 전기전도 1
이덕출,임광현 대한전기학회 1980 전기의 세계 Vol.29 No.11
The main purpose of this paper is to study on the effect of contact state between metal-polymer interface in electrical conduction of polymeric materials under low field region. The electric conduction of polythylene (PE) sandwitched in between two gold (Au) electrodes was lower than that of PE Sandwitched in between two Aluminium (Al) electrodes under low external field. The discharge current of PE which have been treated by the high field application is also obtained some results under no external field. The obtained results can suggest that the material of electrode come to influence on the electrical conduction of polymeric materials and are important as a basis for analysing the data on TSC. It is also suggestive that results of observation must be considered in cases of insulation design of electrical machinery.
건식 열화처리가 FRP 의 표면 열화와 유전특성에 미치는 영향
이덕출,이백수,정의남,유도현,김종택 한국산업안전학회 1998 한국안전학회지 Vol.13 No.3
In this paper, we investigated the change of wettability, surface potential decay and dielectric properties caused by ultraviolet-treated, thermal-treated and discharge-treated FRP(fiber reinforced plastics) respectively for finding out: the influence of dry treatments effected to electrical characteristics on the surface of polymer composites. For the change of wettability, the contact angle of thermal-treated specimen with the high temperature of 200℃ increased. But that of UV-treated and discharge- treated specimen decreased. The characteristic of surface potential decay shows the tendency of the remarkable decrease on UV-treated and discharge-treated specimens, but no difference on thermal-treated specimen compared with untreated one. Also, for the dielectric properties, it shows the increase at large on the treated specimens and especially, the remarkable increase on thermal-treated one.
압출가공방법에 의한 PZT세라믹스-고분자 압전복합재료의 제조 및 특성 연구
이덕출,김진수 한국세라믹학회 1990 한국세라믹학회지 Vol.27 No.1
In this study, to develope the ultrasonic transducer element, the extrusion method which is the processing technique of the piezoelectric composite materials is introduced, the connectivity of the piezoelectric composite materials is the 1-3 type, and we study the properties of the materials. The electromechanical coupling factor(kt) of the materials is above 0.6, the resonance property(fr) is the thickness mode in the frequency range of 0.5 to 2 [MHz] and the acoustic impedance(Zac) is about 5 to 7 [Maryl]. From these results, it is known that the piezoelectric composite materials manufactured byt he extrusion method will be able to develope the ultrasonic transducer elements.