음성합성을 위한 C-ToBI기반의 중국어 운율 경계와 F0 contour 생성

김승원,정옥,이근배,김병창,Kim, Seung-Won,Zheng, Yu,Lee, Gary-Geunbae,Kim, Byeong-Chang 대한음성학회 2005 말소리 Vol.53 No.-

Prosody Generation Based on C-ToBI Representation for Text-to-SpeechSeungwon Kim, Yu Zheng, Gary Geunbae Lee, Byeongchang KimProsody modeling is critical in developing text-to-speech (TTS) systems where speech synthesis is used to automatically generate natural speech. In this paper, we present a prosody generation architecture based on Chinese Tone and Break Index (C-ToBI) representation. ToBI is a multi-tier representation system based on linguistic knowledge to transcribe events in an utterance. The TTS system which adopts ToBI as an intermediate representation is known to exhibit higher flexibility, modularity and domain/task portability compared with the direct prosody generation TTS systems. However, the cost of corpus preparation is very expensive for practical-level performance because the ToBI labeled corpus has been manually constructed by many prosody experts and normally requires a large amount of data for accurate statistical prosody modeling. This paper proposes a new method which transcribes the C-ToBI labels automatically in Chinese speech. We model Chinese prosody generation as a classification problem and apply conditional Maximum Entropy (ME) classification to this problem. We empirically verify the usefulness of various natural language and phonology features to make well-integrated features for ME framework.

초고성능 강섬유보강 시멘트 복합체의 충전슬러리 최적배합 도출

김승원,박철우,김성욱,조현명,전상표,주민관,Kim, Seung-Won,Park, Cheol-Woo,Kim, Seong-Wook,Cho, Hyun-Myung,Jeon, Sang-Pyo,Ju, Min-Kwan 한국건설순환자원학회 2014 한국건설순환자원학회 논문집 Vol.2 No.3

최근 국내외 정세의 변화와 함께 예상하지 못한 테러 등의 극한의 하중의 발생가능성이 증대하고 있다. 또한 국외 건설시장의 활성화와 함께 몇몇 중동국가를 포함하여 정세가 불안정한 국가로의 진출이 잦아지고 있어 신규 또는 기존 사회기반시설 및 건축물의 물리적인 안전성이 많이 요구되고 있다. 따라서 기존의 콘크리트나 강재로는 저항이 불가한 폭발 또는 충격하중의 저항성이 건설재료로서의 중요성이 증가하고 있는 실정이다. 본 연구는 이러한 폭발 및 충격하중에 저항하기 위한 초고성능 강섬유보강 시멘트 복합체를 개발하기 위한 기초연구로서 고혼입량의 강섬유를 우선 도포하고 내부를 충전하기 위한 슬러리의 최적배합의 결정을 위한 연구이다. 이러한 고혼입량의 강섬유의 내부를 충전하기 위한 슬러리의 기초특성을 분석하고자 재료혼입을 변수로 하여 컨시스턴시, 흐름도, J-Fiber Penetration, 블리딩 및 레올로지 특성 및 역학적 특성으로 압축강도와 휨강도를 측정하였다. As political circumstances in oversea countries and Korea varies, the risk of vulnerability from unexpected extreme loading conditions, such as explosions or extreme impacts, also increased. In addition, construction companies in Korea recently have taken chances of overseas expansion to countries where their domestic situations are not in rest. Therefore, the resistance of construction materials for blast or impact loading become taking more consideration from engineering field. This study is a part of the research to develop a high performance fiber reinforced cementitious composite materials with high volume steel fibers and primary purpose of this study is to find an optimum mix proportions of in-fill slurry. In order to accomplish the tasks this study performed experimental investigations on the slurry for consistency, compressive strength, flowability, J-penetration, bleeding and rheology properties as well as mechanical properties, compressive and flexural strength, with respect to different mix proportions.

초음파 절삭기 핸드피스부 제작 및 변위 특성 시뮬레이션

김승원,류주현,이지영,Kim, Seung-Won,Yoo, Ju-Hyun,Lee, Jie-Young 한국전기전자재료학회 2018 전기전자재료학회논문지 Vol.31 No.3

Ultrasonic wave technologies have been widely used in ultrasonic washing machines, ultrasonic surgery, ultrasonic welding machines, ultrasonic sensors, and medical instruments. Ultrasonic surgery can be realized through the cavitation effect of ultrasonic waves. In this study, piezoelectric ceramics were manufactured to achieve the optimum design of a piezoelectric vibrator in a handheld generator for ultrasonic surgery. The best specimen showed the excellent piezoelectric properties of kp＝0.624, Qm＝1,531, and $d_{33}=356pC/N$. Numerical modeling based on the finite element method was performed to find the resonance frequency, the anti-resonance frequency, and the displacement properties of the handheld ultrasonic generator. Maximum displacement was observed in the six-step piezoelectric vibrator at $6.36{\mu}m$.

Synechoscoccus sp. cyanophage 구조단백질의 특성

김승원,김민,임미혜,최영길,Kim, Seung-Won,Kim, Min,Leem, Mi-Hyea,Choi, Yong-Keel 한국미생물학회 1997 미생물학회지 Vol.33 No.4

The protein profile of Synechococcus sp. cyanophage was investigated employing SDS-PAGE. The phage appears to be composed of two major proteins of 97 and 52 kDa and at least seven minor proteins of 70, 65, 60, 40, 35, 28, and 6 kDa. It seems that each subunit is combined to form a multimer although any disulfide bond does not exist in the phage structure. Lytic activity of the phage particle against cell wall was detected around the 52 kDa on renaturing SDS-PAGE using heat-killed Micrococcus luteus cells as substrate. The activity has the optimal pH between 9 and 10, and slightly inhibited by EDTA. Synechococcus sp. cyanophage의 SDS-PAGE 수행 결과 구조단백질은 두 개의 major protein(97 kDa, 52 kDa)과 최소 일곱 개의 minor protein(70 kDa, 65 kDa, 60 kDa, 40 kDa, 35 kDa, 28 kDa, 6 kDa)으로 구성되어 있는 것으로 나타났다. Subunit들은 서로 disulfide bond로 연결되어 있지는 않지만 비공유적 결합으로 multimer를 형성하여 phage particle을 구성하고 있는 것으로 보인다. 또한 heat-killed Micrococcus luteus cell을 기질로 이용한 renaturing SDS-PAGE 방법으로 phage particle내의 세포벽 분해능을 살표본 결과 52 kDa 부근에서 세포벽 분해활성이 발견되었다. 이러한 세포벽 분해활성은 최적 pH가 9~10 사이이며 EDTA에 대한 낮은 저해를 나타내었다.

편마비 환자의 밀기증후군 유무에 따른 기능 회복의 특성

김승원,장우남,황병용,Kim Seung-Won,Chang Woo-Nam,Hwang Byong-Yong 대한물리치료학회 2003 대한물리치료학회지 Vol.15 No.4

A 'pusher syndrome' encompassing postural imbalance and hemi-neglect is believed to aggravate the prognosis of stroke patients. The patients with pusher syndrome show a particular posture that pushing away from the unaffected side of the body. The objective of this study was to investigate associated proprioception, associated neuro-psychological symptoms and characteristics of functional outcome with and without pusher syndrome. The subjects of this study were 58 acute stroke patients who been rehabilitated at two university hospitals in Seoul and Buchun. Data were collected using proprioception test and line bisection test. The ability of ADL was assessed by the Modified Barthel Index, transfer by the Functional Independence Measure, and balance by the Modified Motor Assessment Scale. The results were that significant difference was found in the presence of proprioception, in the incidence of hemineglect and anosognosia, and in the score of ADL, transfer and balance between patients with and without pusher syndrome. Patients without pusher syndrome gained more motor score than patients with pusher syndrome. From improvement of view, patients with pusher syndrome gained the lowest score in ability of transfer. The finding suggest that the patients with pusher syndrome is a poorer functional outcome, be related to proprioception, hemineglect and anosognosia.

회원칼럼 II - 건축물 해체공사 중의 붕괴사고 원인과 대책

김승원,Kim, Seung-Won 한국건축구조기술사회 2012 건축구조 Vol.19 No.4

(Na,K,Li)(Nb,Sb,Ta)O₃계 세라믹스의 소성시간이 압전특성에 미치는 영향

김승원,류주현,Kim, Seung-Won,Yoo, Ju-Hyun 한국전기전자재료학회 2017 전기전자재료학회논문지 Vol.30 No.4

In this paper, in order to develop excellent composition ceramics for a piezoelectric energy- harvesting device, we synthesized $0.99(Na_{0.52}\;K_{0.443}\;Li_{0.037})(Nb_{0.883}\;Sb_{0.08}\;Ta_{0.037})O_3$ + $0.01(Sr_{0.95}Ca_{0.05})TiO_3$ + $0.3\;wt%\;Bi_2O_3\;+\;0.3\;wt%\;Fe_2O_3\;+\;0.3\;wt%\;CuO$ (abbreviated as NKN-SCT) ceramics with different sintering times, using the ordinary solid-state reaction method. The effect of sintering time on the microstructure and piezoelectric properties was investigated. The ceramics with the sintering time of 7 h have the optimum values of the piezoelectric constant ($d_{33}$), piezoelectric voltage constant ($g_{33}$), planar piezoelectric coupling coefficient (kp), mechanical quality factor (Qm), and dielectric constant (${\varepsilon}r$): $d_{33}=314[pC/N]$, $g_{33}=20.07[10^{-3}mV/N]$, kp = 0.442, Qm = 93, ${\varepsilon}r=1,768$, all being suitable for a piezoelectric energy-harvesting device.

사회기반시설 프로젝트내 잠재적 건설 폐기물의 예측 및 관리방안

김승원,Kim, Seung-Won 한국건설순환자원학회 2020 한국건설순환자원학회지 Vol.15 No.2

코딩-열분해법에 의해 제조한 BaTiO$_3 $ 박막의 결정 성장을 위한 낮은 산소 분압에서의 열처리

김승원,Kim, Seung-Won 한국결정성장학회 2000 韓國結晶成長學會誌 Vol.10 No.2

Ba과 Ti의 금속 유기 화합물을 이용하여 (100) $SrTiO_3$ 기판 위에 $BaTIO_3$ 박막을 코팅-열분해법으로 제조하였다. $450^{\circ}C$에서 사전 열처리한 비정질상의 박막은 $2\times 10^{-4}$ atm으로 조정된 산소 분압 하에서 $700^{\circ}C$ 이상의 온도로 열처리함으로써 결정화되었다. $800^{\circ}C$ 이하에서 제조한 박막의 기판에 수직한 면의 격자상수는 cubic $BaTIO_3$의 a 값에 가까우면 $800^{\circ}C$ 이하에서 제조한 박막의 tetragonal $BaTIO_3$ 의 a 값에 가까 웠다. 박막과 기판의 정렬상태를 XRD $\beta$ scan과 pole-figure로 분석한 결과 $BaTIO_3$ 박막은 $SrTiO_3$ 기판과 에피택시 관계가 있었다. $800^{\circ}C$에서 열처리한 박막의 표면은 0.4${\mu}m$ 정도의 섬 형태의 입자로 구성되어 있었고 약 0.8$\mu\textrm{m}$의 두께를 가진 단면은 구형의 입자가 층을 이루고 있었다. $BaTIO_3$ thin films were prepared on (100) $BaTIO_3$ substrates by coating- pyrolysis process using metal-organic compounds of Ba and Ti. The amorphous films prefired at $450^{\circ}C$were crystallized above $700^{\circ}C$ under oxygen partial pressure of $2\times 10^{-4}$. The lattice parameters of the perpendicular axis for the $BaTIO_3$ thin films heat-treated below $800^{\circ}C$ were closer to a value of cubic $BaTIO_3$, whereas those above $800^{\circ}C$ were closer to a value of tetragonal BaTiG. The results of XRD P scan and pole-figure analyses indicated that BaTiO, thin films have an epitaxial relationship with the $SrTiO_3$ substrates. The $BaTIO_3$thin films annealed at$800^{\circ}C$ showed the surface with island-like grains about 0.4$mu \textrm{m}$ and the cross section of 0.8 $mu \textrm{m}$ thickness with granular grains.

기술초대석 I - H형강 접합 매뉴얼에 있는 소성회전중심법에 의한 면내 편심하중을 받는 볼트군 및 필릿용접군의 전단강도 - Part III

김승원,Kim, Seung-Won 한국건축구조기술사회 2015 건축구조 Vol.22 No.4