http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고강도 스틸을 적용한 연소기 분사장치의 전자빔 용접 공정 개발 및 물성 평가
박재홍(Jaehong Park),조황래(Hwangrae Cho),이병호(Byungho Rhee),이금오(Keumoh Lee),유철성(Chulsung Ryu),최환석(Hwanseok Choi) 한국추진공학회 2013 한국추진공학회 학술대회논문집 Vol.2013 No.5
액체로켓 엔진용 연소기의 분사장치 재료는 주로 오스테나이트 계열의 스테인레스 강이 사용되고 있다. 특히 UNS S31603은 상용화 되어있으면서 저온 인성이 높아 널리 사용되고 있지만 고추력에 적용하기 위해서는 보다 두꺼운 치수로 설계되어야 한다. 따라서 이와 같은 단점을 해결하기 위해서 높은 비강도를 갖는 고강도 스틸이 요구되고 있다. 본 연구에서는 적합한 비강도를 갖는 고강도 스틸을 준비하여 연소기 제작과정에 있어서 주요 공정 중 하나인 전자빔 용접특성에 대하여 조사하고자 한다. 특히, 한국형 발사체에 적용되는 분사장치의 특정부위의 적합한 용접조건을 찾고자 하였다. Austenite stainless steel is usually used for the combustor mixing head of liquid rocket engine. Especially, UNS S31603 is widely used due to its high cold toughness, but it has to be designed with bigger thickness so as to be applied at high thrust. In order to supplement this defect, it is required to employ high strength steel for higher specific strength. In this research, electron beam welding, one of the main process in manufacturing combustor, is to be investigated with high strength steel which has appropriate specific strength. Welding condition search was focused on specific parts of combustor mixing head which is used for KSLV-Ⅱ.