Modelization of Lentinula edodes Incubation Processing

Hyun You Chang,Geum Hui Seo,Yong Kuk Lee,Dong Yun Kang,Ji Hyun Jung,Sung Woo Jeon 한국버섯학회 2017 버섯 Vol.21 No.2

This study was carried out to investigate the management characteristics and techniques by comparing and analyzing the process of mixing, sterilization, cooling, inoculation and incubation for bag cultivation of L. edodes. The medium was sterilized after mixing it for 30 minutes, 1 and 2 hours respectively. The general moisture content of the sawdust substrate has been adjusted to 65%, while the case of the L. edodes substrate was 55%. Only 5% of wood chips of 5-8 mm in particle size were mixed to secure the space of the sawdust particles. As a result, mycelial growth was 1.4cm faster and the density was better(+++) than control(++). Wood chips are soaked in advance for a week during winter and 4 days during summer. There is an average number of 1.6x108 (cfu) of microorganisms in the sawdust that has been piled for six months outdoor. In summer, it has to be used immediately after mixing sawdust. High-pressure sterilization should be performed to use as a mushroom spawn, and to improve physical properties, it was great to sterilize the medium at a normal-pressure. There are height and width type for bags to be consumed for bagging. When the height was reduced into 17cm and the width was increased into 13cm, the browning period was shortened by 30 days and the period of mycelial growth was shortened by 25 days. The sterilized medium had an average of 4x103(cfu) of microorganisms at 25°C and 1.3×102 (cfu) at 15°C. After 25 days from inoculation in vitro, the growth condition of sawdust was the best with 13.2 cm, followed by grain spawn and liquid respectively. When inoculated with liquid spawn, the moisture content of substrate should be adjusted to 55% to 50% in advance.

Characteristics of sawdust cultivation of Lentinula edodes with different methods of spawn inoculation

전성우,서금희,이용국,장현유 한국버섯학회 2018 한국버섯학회지 Vol.16 No.2

This study was carried out to investigate the management characteristics and growth performance of L. edodes from the cooling stage to incubation. Bags of different heights and weights are available for bagging. When the medium size of 17x13 cm was used and the size of the inoculation hole was changed from 1/3 to 2/3, the browning period was shortened to 30 days. Mycelial growth was evaluated according to the cooling temperature after sterilization. It was observed to be the highest at 122 mm/15 days at 10oC and 114 mm/15 days and 117 mm/15 days at 15oC and 20oC, respectively. The contamination rate of the sawdust media before inoculation was measured as 0, 4.5x10, 1.3x102, 4.0x103 cfu at 5oC, 10oC, 15oC, and 24oC respectively. The average of 1.6x108 colony forming units (cfu) of microorganisms was observed in the sawdust that had been piled for six months outdoors. In summer, the sawdust has to be used immediately after mixing. The sterilized medium had an average of 4x103 cfu of microorganisms at 24oC and 1.3×102 cfu at 15 °C. After 15 days of inoculation in vitro, the growth conditions of the sawdust was the best at 132 mm, followed by grain and liquid. When inoculated with liquid spawn, the moisture content of the substrate should be adjusted between 50% and 55% in advance.

Characteristics of sawdust cultivation of Lentinula edodes with different methods of spawn inoculation

Chang, Hyun You,Seo, Geum Hui,Lee, Yong Kuk,Jeon, Sung Woo The Korean Society of Mushroom Science 2018 한국버섯학회지 Vol.16 No.2

This study was carried out to investigate the management characteristics and growth performance of L. edodes from the cooling stage to incubation. Bags of different heights and weights are available for bagging. When the medium size of $17{\times}13cm$ was used and the size of the inoculation hole was changed from 1/3 to 2/3, the browning period was shortened to 30 days. Mycelial growth was evaluated according to the cooling temperature after sterilization. It was observed to be the highest at 122 mm/15 days at $10^{\circ}C$ and 114 mm/15 days and 117 mm/15 days at $15^{\circ}C$ and $20^{\circ}C$, respectively. The contamination rate of the sawdust media before inoculation was measured as 0, $4.5{\times}10$, $1.3{\times}10^2$, $4.0{\times}10^3cfu$ at $5^{\circ}C$, $10^{\circ}C$, $15^{\circ}C$, and $24^{\circ}C$ respectively. The average of $1.6{\times}10^8$ colony forming units (cfu) of microorganisms was observed in the sawdust that had been piled for six months outdoors. In summer, the sawdust has to be used immediately after mixing. The sterilized medium had an average of $4{\times}10^3cfu$ of microorganisms at $24^{\circ}C$ and $1.3{\times}10^2cfu$ at $15^{\circ}C$. After 15 days of inoculation in vitro, the growth conditions of the sawdust was the best at 132 mm, followed by grain and liquid. When inoculated with liquid spawn, the moisture content of the substrate should be adjusted between 50% and 55% in advance.

Characteristics of sawdust cultivation of Lentinula edodes with different methods of spawn inoculation

Hyun You Chang,Geum Hui Seo,Yong Kuk Lee,Sung Woo Jeon 한국버섯학회 2018 한국버섯학회지 Vol.16 No.2

This study was carried out to investigate the management characteristics and growth performance of L. edodes from the cooling stage to incubation. Bags of different heights and weights are available for bagging. When the medium size of 17x13 cm was used and the size of the inoculation hole was changed from 1/3 to 2/3, the browning period was shortened to 30 days. Mycelial growth was evaluated according to the cooling temperature after sterilization. It was observed to be the highest at 122 mm/15 days at 10 °C and 114 mm/15 days and 117 mm/15 days at 15 °C and 20 °C, respectively. The contamination rate of the sawdust media before inoculation was measured as 0, 4.5x10, 1.3x102, 4.0x103 cfu at 5 °C, 10 °C, 15 °C, and 24 °C respectively. The average of 1.6x108 colony forming units (cfu) of microorganisms was observed in the sawdust that had been piled for six months outdoors. In summer, the sawdust has to be used immediately after mixing. The sterilized medium had an average of 4x103 cfu of microorganisms at 24 °C and 1.3×102 cfu at 15 °C. After 15 days of inoculation in vitro, the growth conditions of the sawdust was the best at 132 mm, followed by grain and liquid. When inoculated with liquid spawn, the moisture content of the substrate should be adjusted between 50% and 55% in advance.

저비용 우량봉지종균 생산기술 개발

조우식 외 한국버섯학회 2010 한국버섯학회지 Vol.8 No.1

느타리버섯 재배시 현재 톱밥병종균을 대체할 수 있는 저비용 우량봉지제조기술을 개발하기위해 시험을 수행한 결과는 다음과 같다. 1. 재료의 산도 (pH)는 포플러톱밥이 pH 6.7, 미강은 pH 6.4에 비하여 비트펄프는 pH 4.9로 다른 배지재료에 비하여 산성을 나타내었다. T-C는 포플러톱밥 57.5%, 면실피 54.5%, 미강 52.4%로 나타났고, T-N는 포플러톱밥이 0.1%로 면실피 1.77%, 미강 0.94%로 나타났다. 2. 균사생장정도는 신농73호 2.5kg 규격 종균의 필터가 구비된 종균의 경우 15.7cm, 마개형 10.5cm, 필터가 없는 종균은 7.5cm로 필터구비종균이 생장이 우수하였고, 균사밀도의 경우에도 필터형이 밀도가 높았다. CO₂ 농도는 신농73호 2.5kg 규격 종균의 필터가 구비된 종균의 경우 1,400ppm, 마개형 2,200ppm, 필터가 없는 종균은 3,200ppm 로 필터구비종균이 농도가 낮음을 알 수 있다. 3. 배양소요일수를 측정한 결과, 신농 73호에서 2.5㎏ 필터종균의 경우 18일, 마개필터 18일, 필터가 없는 처리는 19일로 큰 차이는 없었다. 생산량의 경우 신농73호에서 2.5㎏ 필터종균의 경우 118g, 마개필터 112g, 필터가 없는 처리는 100g으로 필터처리 종균이 생산력 측면에서 우수하였다. The word spawn is derived from an old French verb, espandre, meaning to spread out or expand. Spawn is also defined as "the mycelium of fungi, especially of mushrooms grown to be eaten, used for propagation." The effects of bag spawn to sawdust substrate on the growth of Pleurotus ostreatus were conducted. The duration of mycelial growth and days of pinhead formation of bag spawn(2.5kg) were 18~19days and 7~8days, whereas bottle spawn (1,000㎖) was 18days and 6days, respectively. The yield of mushroom fruitbody was that bag spawn is 100~118g, bottle spawn is 95~115g. In economical analysis, bag spawn is increased to 50%, compared to bottle spawn in relative income.The word spawn is derived from an old French verb, espandre, meaning to spread out or expand. Spawn is also defined as "the mycelium of fungi, especially of mushrooms grown to be eaten, used for propagation." The effects of bag spawn to sawdust substrate on the growth of Pleurotus ostreatus were conducted. The duration of mycelial growth and days of pinhead formation of bag spawn(2.5kg) were 18~19days and 7~8days, whereas bottle spawn (1,000㎖) was 18days and 6days, respectively. The yield of mushroom fruitbody was that bag spawn is 100~118g, bottle spawn is 95~115g. In economical analysis, bag spawn is increased to 50%, compared to bottle spawn in relative income.

저비용 우량봉지종균 생산기술 개발

조우식,황억금,김찬용,조두현,최성용,박소득 한국버섯학회 2010 한국버섯학회지 Vol.8 No.1

The word spawn is derived from an old French verb, espandre, meaning to spread out or expand. Spawn is also defined as “the mycelium of fungi, especially of mushrooms grown to be eaten, used for propagation.” The effects of bag spawn to sawdust substrate on the growth of Pleurotus ostreatus were conducted. The duration of mycelial growth and days of pinhead formation of bag spawn(2.5kg) were 18~19days and 7~8days, whereas bottle spawn (1,000㎖) was 18days and 6days, respectively. The yield of mushroom fruitbody was that bag spawn is 100~118g, bottle spawn is 95~115g. In economical analysis, bag spawn is increased to 50%, compared to bottle spawn in relative income.