師範大學 科學科 實驗實習敎育의 模型硏究

尹世重,李聖瑞,徐廷穆,崔鎬亨,蘇鮮燮 공주대학교 사범대학 과학교육연구소 1984 과학교육연구 Vol.16 No.1

師範大學의 生物 實驗 敎育의 改善 方向을 강구하기 위하여 전국 15개 師範大學의 生物敎育科에서 敎育하고 있는 실험 실습을 학점을 중심으로 조사하였고 아울러 20개 非師範系 대학의 생물 실험실습 학점도 조사하여 비교하고, 분석 하므로서 다음과 같은 몇 가지 결과를 얻게 되었다. 1) 師範系 生物 敎育科의 전공 학과중 實驗 實習 배정시간 및 학점수를 늘려 나가야 하겠다. 2) 探究學習 지도 能力을 保有할 수 있도록 實驗 實習 指導 改善 方法을 강구해야겠다. 3) 基礎 共通科目은 3과목 모두를 최소한 1학기는 이수토록 해야 하고 반드시 실험 실습을 竝行 하여야 하겠다. A study for the model of the laboratory experiment curriculum in teacher's college seience was done. Because of individual characteristics in each field in department sc-ience education, the model was not necessarily unique. However, the common elements of frame in this model were suggested as follows : 1. The ratio of laboratory experiment's credits and total major credits. 2. The ratio of basic common laboratory experiment's credits (basic physics, basic chemistry, basic biology, and basic earth science) and total laboratory experiment's credits. 3. Credits and course name of laboratory experiments charactoristic for the science education in teacher's college. 4. Suggestion of the experimental guide for an inquiry learning.

특수 언어발달 장애 환아의 임상 및음향음성학적 특성연구

김연희,박세훈,신용일,김찬양,김현기,김정수 大韓再活醫學會 2000 Annals of Rehabilitation Medicine Vol.24 No.1

유동성 복합레진의 마모저항성에 관한 연구

윤연희,김정욱,이상훈,한세현 大韓小兒齒科學會 2002 大韓小兒齒科學會誌 Vol.29 No.2

시술시간을 줄이는데 유리한 재료인 유동성 복합레진을 유구치부에 사용하려고 고려할 때 중요한 물성 중 하나는 마모저항성이다. 이 연구의 목적은 유동성 복합레진의 마모저항성을 일반복합레진의 마모저항성을 비교하는 것이다. 실험에 사용된 유동성 복합레진으로 1군에서는 Arabesk flow (VOCO, Germany), 2군에서는 Tetric flow (Vivadent, Liechtenstein), 3군에서는 Aeliteflow (Bisco, U.S.A), 4군에서는 Filtek flow (3M Dental Co, U.S.A)을 사용하였으며 대조군으로 사용한 5군의 복합레진은 Z100 (3M Dental Co, U.S.A)이었다. 시편들(n=10)은 두께 2mm, 지름 5mm의 원통모양으로 제작하여 마모시험 전 37℃의 증류수에서 7일 동안 담가 놓았다. 제1소구치와 레진시편을 MTS 시스템에서 2Hz로 50,000회 접촉, 마모시켰다. 마모시험시 lateral excursion은 0.4mm, 교합력은 2-100N의 조건이었다. 마모시험후 마모된 부피, 최대마모깊이, 재료자체의 표면경도를 측정하였고 마모되지 않은 표면과 마모가 일어난 표면을 주사전자현미경으로 관찰하였으며 다음과 같은 결과를 얻었다. 1. 마모된 부피는 3군에서 가장 적었고 4군에서 가장 많았으며 3군<1군<2군<5군<4군의 순서로 증가하였다. 2. 3군, 1군, 2군, 5군이나 4군에 비해 통계적으로 유의하게 마모부피가 적었다(P<0.05). 그러나, 3군, 1군, 2군 사이에서와 5군, 4군 사이에서는 각각 통계적으로 유의한 차이가 없었다. 3. 최대마모깊이는 1군에서 가장 낮았고, 4군에서 가장 깊었으며 1군<3군<5군<2군<4군의 순서로 증가하였다. 4. 5군의 표면경도는 다른 유동성 복합레진군에 비해 통계적으로 유의하게 높았으나(P<0.05). 마모부피나 최대마모깊이와는 통계적으로 유의한 상관관계를 보이지 않았다. 5. 마모되지 않은 표면과 마모가 일어난 표면을 주사전자현미경으로 관찰한 결과, 유동성 복합레진군과 5군 사이에 마모양상이 다르게 나타나는 것을 볼 수 있었다. When we use the flowable resin on the primary molars for quick handling, one of the most important property is the wear resistance. This study was performed to compare the wear resistance characteristics of four flowable composite resins [Arabesk flow (group 1), Tetric flow (group 2), Aeliteflow (group 3), Filtek flow (group 4)] to that of one control composite resin [Z100 (group 5)]. Specimen discs(n=10), 10mm wide and 2mm thick, were stored in distilled water at 37℃ for 7 days prior to testing. The specimens were subjected to 50,000 strokes at 2Hz on the MTS system. During the test, the following parameters were maintained: the ;atera; excursion at 0.4mm, occlusal force at 2-100N with a force profile in the form of a half sine wave. The measurements of volume loss, depth of wear, and Vicker's hardness number of composite resins, and SEM obserbations of the polished and abraded surfaces were established. One-way ANOVA and Scheffe's multi-ple comparison test were employed to detect statistically significant differences among the flowable composite resin group and the control composite group at P<.05. The following results were obtained: 1. Group 3 showed the least volume loss, while group 4 showed the greatest. The mean volume loss increased in the following order: group 3<group 1<group 2<group 5<group 4. 2. Group 3, group 1, and group 2 showed significantly lesser volume loss compared to group 5 and group 4(p<0.05). However, There was no statistically significant difference among group 3, group 1 and group 2. There was no statistically significant difference between group 5 and group 4. 3. Group 1 showed the shallowest depth of wear, while group 4 showed the deepest. The mean depth of wear increased in the following order: group 1<group 3<group 5<group 2<group 4. 4. Group 5 showed significantly highest hardness value compared to the flowable composite resin groups(p<0.05), but there was no correlation between wear resistance and Vickers hardness number. 5. SEM observation of the unworn and worn surfaces revealed the differences in the wear appearance between the flowable composite resin groups and the control.

Single Median Maxillary Central Incisor(SMMCI) 환아의 증례보고

신윤경,김영재,김정욱,장기택,이상훈,한세현,김종철 大韓小兒齒科學會 2007 大韓小兒齒科學會誌 Vol.34 No.4

Anatomic abnormalities of teeth development include the presence of a single maxillary central incisor at midline instead of two central incisors. The incidence of cases with a single maxillary central incisor is approximately 1 in every 50,000 live births. single median maxillary central incisor(SMMCI) may be a integral manifestation of anyone of a number of syndromes. It has been reported an association with several midline disorders which have varied in severity. A SMMCI has also been reported as an isolated finding. But in some cases, it has been considered as an incomplete expression of autosomal dominant holoprosencephaly. So any patient who appears for treatment with a SMMCI should be referred for a detailed medical examination to exclude other associated systemic abnormalities and for mutation analysis to facilitate correct diagnosis and the provision of appropriate genetic counseling. Early orthodontic treatment is needed to minimalize emotional trauma of child. This case report was about three patients with a SMMCI as isolated finding. The purpose of these case reports was to present cases of single maxillary central incisor not associated with other disorders. Single Median Maxillary Central Incisor(SMMCI)는 상악 중절치 형성부전으로 하나의 상악 중절치가 정중앙에 위치하는 치아 발달의 해부학적 이상을 의미한다. 50,000명 중에 1명 꼴로 발생할 정도로 아주 드물며 각종 증후군 및 정중선 이형성을 보이는 발달장애와 연관되어 나타나는 것으로 보고되고 있다. SMMCI는 다른 이상과 연계되지 않고 독립적으로 나타날 수도 있으나 상염색체 우성유전인 전전뇌증(holoprosencephaly)의 경미한 발현일 가능성이 있으므로 유전자 상담이 필요하다. 또 특징적인 안모 및 구강 상태를 보이므로 환아의 바람직한 신체적,정서적 발달을 위해 조기에 교정적 접근이 필요하다. 본 증례는 다른 이상 소견을 보이지 않는 세 명의 SMMCI 환아의 증례를 보고하는 바 이다.

Polyimide 기판을 이용한 Flexible CIGS 박막 태양전지 제조

정승철(Jung, Seung-Chul),안세진(Ahn, Se-Jin),윤재호(Yun, Jae-Ho),곽지혜(Gwak, Ji-Hye),김도진(Kim, Do-Jin),윤경훈(Yoon, Kyung-Hoon) 한국신재생에너지학회 2009 한국신재생에너지학회 학술대회논문집 Vol.2009 No.06

In this study, we fabricated the Cu(In,Ga)Se₂ (CIGS) thin-film solar cells by using a polyimide substrate. The CIGS thin-film was deposited on Mo coated polyimide substrate by a 3-stage co-evaporation technique. Because the polyimide shows thermal transformation at about 400?C, the substrate temperature of co-evaporation process was set to below 400?C. Corresponding solar cell showed a conversion efficiency of 7.08 % with V_{OC} of 0.58 V, J_{SC} of 24.99 mA/cm² and FF of 0.49.

재발성 법랑아세포종 : 증례보고 A CASE REPORT

조세인,김수관,김운규,윤정훈 대한악안면성형재건외과학회 2002 Maxillofacial Plastic Reconstructive Surgery Vol.24 No.1

Ameloblastoma is most commonly occuring odontogenic tumor in oral cavity. The biologic behavior of this neoplasm is a slowly growing, locally invasive tumor with a high rate of recurrence, therefore malignant neoplasm is defined clinically. Surgical procedures of the ameloblastoma is classified curettage, enucleation, marginal resection, segmental resection, and hemisection. Treatment method, recurrence rate, and prognosis are different depending on the clinical type of ameloblastoma. We experienced recurred ameloblastoma in mandibular edentulous area after conservative operation. This is a report of a case about 41-year-old female patient with recurred ameloblastoma on mandible body treated by marginal resection and autogenous iliac bone graft. We present the case with review of literature.

동시진공 증발법을 이용한 Cu₂ZnSnSe₄ 박막 태양전지의 제조와 기판온도가 광전압 특성에 미치는 영향

정성훈(Jung, Sung-Hun),안세진(Ahn, Se-Jin),윤재호(Yun, Jae-Ho),곽지혜(Gwak, Ji-Hye),김동환(Kim, Dong-Hwan),윤경훈(Yoon, Kyung-Hoon) 한국신재생에너지학회 2009 한국신재생에너지학회 학술대회논문집 Vol.2009 No.06

Despite the success of Cu(In,Ga)Se₂ (CIGS) based PV technology now emerging in several industrial initiatives, concerns about the cost of In and Ga are often expressed. It is believed that the cost of those elements will eventually limit the cost reduction of this technology. one candidate to replace CIGS is Cu₂ZnSnSe₄ (CZTSe), fabricated by co-evaporation technique. Effects of substrate temperature of Cu₂ZnSnSe₄ absorber layer on the performance of thin films solar cells were investigated. As substrate temperature increased, the grain size of Cu₂ZnSnSe₄ films increased presumably. At a optimal condition of substrate temperature is 320?C, the solar cell shows a conversion efficiency of 1.79% with V_{OC} of 0.213V, JSC of 16.91mA/cm² and FF of 49.7%.

치아 맹출전 시행한 기관 삽관이 유치열기에 미치는 영향에 대한 증례보고

신윤경,Hyun, Hong-Keun,김영재,김정욱,장기택,이상훈,김종철,한세현 大韓小兒齒科學會 2008 大韓小兒齒科學會誌 Vol.35 No.3

유치 맹출전에 치조융기에 가해진 외상은 유치의 맹출 지연 및 형태이상,치배의 변위 등을 일으킬 수 있으며 심한 경우 구개의 흠 형성,절치의 결함 및 후천성 구개열 등을 야기할 수 있다. 본 증례는 치아가 맹출하기 전에 수차례의 기관 삽관을 시행한 병력이 있는 심한 저체중아에서 맹출지연,형태이상,법랑질 저형성,영구치 치배 등의 변위가 관찰되어 이를 보고하는 바이다. Delayed eruption and abnormal morphology of the primary incisors following intubation may be due to follicular displacement and localized trauma caused by the process of intubation. Result of such damage included palatal groove formation, defective incisors and acquired clefts. This clinical report presents effect of intubation on the primary dentition of premature low-birth-weight children prior to tooth eruption.

Effects of substrate temperature on the performance of Cu₂ZnSnSe₄ thin film solar cells fabricated by co-evaporation technique

정성훈(Jung, Sung-Hun),안세진(Ahn, Se-Jin),윤재호(Yun, Jae-Ho),곽지혜(Gwak, Ji-Hye),조아라(Cho, A-Ra),윤경훈(Yoon, Kyung-Hoon),김동환(Kim, Dong-Hwan) 한국신재생에너지학회 2009 한국신재생에너지학회 학술대회논문집 Vol.2009 No.11

Despite the success of Cu(In,Ga)Se₂ (CIGS) based PV technology now emerging in several industrial initiatives, concerns about the cost of In and Ga are often expressed. It is believed that the cost of those elements will eventually limit the cost reduction of this technology. One candidate to replace CIGS is Cu₂ZnSnSe₄ (CZTSe), fabricated by co-evaporation technique. Co-evaporation technique will be one of the best methods to control film composition. This type of absorber derives from the CuInSe² chalcopyrite structure by substituting half of the indium atoms with zinc and other half with tin. Energy bandgap of this material has been reported to range from 0.8eV for selenide to 1.5eV for the sulfide and large coefficient in the order of 10^{14}cm^{-1}, which means large possibility of commercial production of the most suitable absorber by using the CZTSe film. In this work, Effects of substrate temperature of Cu₂ZnSnSe₄ absorber layer on the performance of thin films solar cells were investigated. We reported on some of the absorber properties and device results.

랫드 배양배아에서 ginsenosides가 superoxide dismutase 유전자 발현에 미치는 영향

김재승, 이세라, 김연, 연정민, 백인정, 안병우, 김윤배, 이범준, 윤영원, 남상윤 충북대학교 동물의학연구소 2006 Journal of Biomedical and Translational Research Vol.7 No.2

본문참고