반원형 리블렛 상부 난류경계층의 유동 구조 연구

이상현,이상준,Lee, Sang Hyun,Lee, Sang Joon 대한기계학회 1999 大韓機械學會論文集B Vol.23 No.7

The near-wall flow structures of turbulent boundary layer over riblets having semi-circular grooves were investigated experimentally for the drag decreasing ($s^+=25.2$) and drag increasing ($s^+=40.6$) cases. The field of view used for tho velocity field measurement was $6.75{\times}6.75mm^2$ in physical dimension, containing two grooves. One thousand instantaneous velocity fields over the riblets were extracted for each case of drag increase and decrease. For comparison, five hundreds instantaneous velocity fields over a smooth flat plate were also obtained under the same flow conditions. To see the global flow structure qualitatively, the flow visualization was also performed using the synchronized smoke-wire technique. For the drag decreasing case ($s^+=25.2$), most of the streamwise vortices stay above the riblets, interacting with the riblet tips. The high-speed in-rush flow toward the riblet surface rarely influences the flow inside tho riblet valleys submerged in the viscous sublayer. The riblet tips seem to impede the spanwise movement of the longitudinal vortices and induce secondary vortices. The turbulent kinetic energy in the riblet valley is sufficiently small to compensate the increased wetted area of the riblets. In addition, in the logarithmic region, the turbulent kinetic energy are small or almost equal to that of a smooth flat plato. For the drag increasing case ($s^+=40.6$), however, the streamwise vortices move into the riblet valley freely, interacting directly with the riblet inner surface. The penetration of the high-speed in-rush flow on the riblets increases tho skin-friction. The turbulent kinetic energy is increased in the riblet valleys and even in the outer region compared to that over a flat plate.

콘크리트의 탄산화 관점에서 CO₂ 배출량-흡수량 평가에 관한 연구

이상현,이성복,이한승,Lee, Sang-Hyun,Lee, Sung-Bok,Lee, Han-Seung 한국콘크리트학회 2009 콘크리트학회논문집 Vol.21 No.1

콘크리트는 생산과정에서 다량의 이산화탄소를 배출하는 시멘트를 사용하기 때문에 반친환경적 재료로 인식되고 있다. 하지만 콘크리트는 사용기간 중 탄산화 과정을 통하여 대기중의 이산화탄소를 흡수한다. 이에 본 연구에서는 기존문헌 고찰을 통하여 1) 콘크리트 내 탄산화 가능한 물질의 농도, 2) 탄산화된 콘크리트의 체적, 3) 이산화탄소 분자량을 이용, 탄산화를 통한 콘크리트의 이산화탄소 흡수량의 정량적 산출 방법을 제시하였다. 또한 콘크리트 생산에 사용되는 재료들의 이산화탄소 배출량 자료를 이용하여 단위 콘크리트 생산에 따른 이산화탄소 배출량을 정량적으로 산출하였다. 이러한 콘크리트의 이산화탄소 흡수량 및 배출량의 정량적 산출방법을 이용하여 실제 사용중인 아파트 건축물 1동을 대상으로 하여 콘크리트의 생산에 따른 배출량과 사용기간에 따른 이산화탄소 흡수량을 정량적으로 산출하여 이산화탄소의 배출량-흡수량 평가를 실시하였다. 그 결과 건축물을 40, 60, 80년 사용시, 사용된 콘크리트의 이산화탄소 배출량 대 흡수량의 비율이 3.65, 4.47, 5.18%로 나타났다. 본 연구는 콘크리트 생산 및 사용에 따른 이산화탄소 배출량-흡수량의 정량적 산정방법에 연구의 목적을 두었으며 이산화탄소 배출량-흡수량 평가 결과 구조물을 80년 사용할 시 약 5.18%로 그 값이 미비하였으나 시멘트의 혼화재 치환율 증가를 통한 배출량 저감과 탄산화 체적 증가를 통한 이산화탄소 흡수량 증가를 통해 배출량-흡수량을 향상시킬 수 있으며, 향후 콘크리트의 이산화탄소 배출량-흡수량 평가에 본 연구의 방법이 유용하게 활용될 수 있을 것으로 판단된다. A concrete is considered unfriendly-environmental material because it uses cement which emits much $CO_2$ during producing process. However, a concrete absorbs $CO_2$ through carbonation process during service life. In this paper how much concrete absorbs $CO_2$ through carbonation was calculated using 1) concentration of carbonatable substances in concrete, 2) carbonated volume of concrete, 3) molecular weight of $CO_2$ based on references and the method was proposed. $CO_2$ emission from producing $1m^3$ concrete was calculated based on $CO_2$ emission datum of materials used in concrete. From using these methods that calculate $CO_2$ emission and absorption of concrete, assessment of $CO_2$ emission-absorption against a real apartment was conducted by subtracting absorption $CO_2$ according to service life from $CO_2$ emission in the process of making concrete. As a result, a ratio of absorption over emission of $CO_2$ through concrete carbonation according to service life 40, 60, 80 years was assessed about 3.65, 4.47, 5.18%. An objective of this study is to propose how to calculate emission - absorption of $CO_2$ from producing and using concrete. Although the result value, emission - absorption of $CO_2$, is 5.18% very low when the service life of an apartment is 80years, the value can be improved by reducing emission from using blended cement such as blast furnace slag or increasing replacement ratio of cement and increasing carbonated volume of concrete from expanding service life of a building. This study may be useful when $CO_2$ emission - absorption of concrete is evaluated in the further study.

입력전류 파형 개선형 단상 정류기의 토폴로지

이상현(Sang-Hyun Lee),박진민(Jin-Min Park),문상필(Sang-Pil Mun),서기영(Ki-Young Suh) 한국조명·전기설비학회 2003 한국조명·전기설비학회 학술대회논문집 Vol.2003 No.-

For small capacity rectifier circuits such as these for consumer electronics and appliances, capacitor input type rectifier circuits are generally used. Consequently, various harmonics generated within the power system become a serious problem. Various studies of this effect have been presented previously. However, most of these employ switching devices, such as FETs and the like. The absence of switching devices makes systems more tolerant to over-load, and brings low radio noise benefits. We propose a power factor correction scheme using a LC resonant in commercial frequency without switching devices. In this method, it makes a sinusoidal wave by widening conduction period using the current resonance in commercial frequency, Hence the harmonic characteristics can be significantly improved, where the lower order harmonics, such as the fifth and seventh order are much reduced. The result are confirmed by the theoretical and experiment implementations.

추황배(Pyrus pyrifolia Nakai cv. Chuhwangbae) 과피로부터 1종의 Sterol과 3종의 배당체 화합물의 단리·동정

이유건(Yu Geon Lee1),조정용(Jeong-Yong Cho),이현주(Hyun Joo Lee),이용현(Yong Hyun Lee),이상현(Sang-Hyun Lee),한태호(Tae-Ho Han),김월수(Wol-Soo Kim),박근형(Keun-Hyung Park),문제학(Jae-Hak Moon) 한국식품과학회 2013 한국식품과학회지 Vol.45 No.5

본 연구에서는 배의 유용성 증명을 위한 일환으로 배의 화학성분을 분자수준에서 밝히고자 하였다. 이에 배 과피 MeOH 추출물을 용매분획하여 얻은 EtOAc-산성 분획과 EtOAc-중성분획을 대상으로 Sephadex LH-20, silica gel, 그리고 ODS colmn chromatography와 HPLC를 이용하여 정제 및 단리하였다. 그 결과, EtOAc-산성 분획과 EtOAc-중성 분획으로부터 각각 2종씩의 화합물을 단리하였다. 단리된 화합물 1-4는 1H- 및 13C-NMR 분석을 통하여 각각 (S)-(+)-2-cis-abscisic acid O-β-D-glucopyranosyl ester (화합물 1), 1-[4-O-β-D-glucopyranosyl]phenyl ethanone(piceoside, 화합물 2), β-sitosterol (화합물 3), 그리고 β-sitosteryl 3-O-β-D-glucopyranoside (화합물 4)로 동정되었다. 단리된 3종의 배당체 화합물(화합물 1, 2, 4)들은 본 연구에 의해 배로부터 처음 동정되었으며, 화합물 3은 추황배로부터 처음 동정되었다. 본 연구결과가 배 함유 성분연구는 물론 배의 기능성 해명 연구에도 추후 중요한 기초자료로 활용되길 기대한다. We isolated and identified antioxidants from acidic and neutral ethyl acetate fractions of the peel of pear (Pyrus pyrifolia N. cv. Chuhwangbae). We isolated 4 compounds from the methanol extract, by using 3 different types of column chromatography (Sephadex LH-20, silica gel, and octadecylsilane) and preparative HPLC. We identified the isolated compounds as (S)-(+)-2-cis-abscisic acid O-β-D-glucopyranosyl ester (compound 1), 1-[4-O-β-D-glucopyranosyl]phenyl ethanone (picroside, compound 2), β-sitosterol (compound 3), and β-sitosteryl 3-O-β-D-glucopyranoside (compound 4) by nuclear magnetic resonance analysis. We are the first to report the identification of compounds 1, 2, and 4 from pear.

IoT 보안을 위한 SHA-256 해시 프로세서의 면적 효율적인 설계

이상현,신경욱,Lee, Sang-Hyun,Shin, Kyung-Wook 한국정보통신학회 2018 한국정보통신학회논문지 Vol.22 No.1

전자서명, 인증 코드, 키 생성 알고리듬 등의 보안 프로토콜에 사용되는 SHA-256 해시 함수를 면적 효율적으로 설계하였다. 설계된 SHA-256 해시 프로세서는 입력 메시지에 대한 패딩 및 파싱 기능을 수행하는 패더 블록을 포함하여 프리프로세싱을 위한 소프트웨어 없이 동작하도록 구현하였다. 라운드 연산을 16-비트 데이터 패스로 구현하여 64 라운드 연산이 128 클록 주기에 처리되도록 하였으며, 이를 통해 저면적 구현과 함께 성능 대비 하드웨어 복잡도 (area per throughput; APT)를 최적화 하였다. 설계된 SHA-256 해시 프로세서는 Virtex5 FPGA로 구현하여 정상 동작함을 확인하였으며, 최대 116 MHz 클록 주파수로 동작하여 337 Mbps의 성능을 갖는 것으로 평가되었다. ASIC 구현을 위해 $0.18-{\mu}m$ CMOS 셀 라이브러리로 합성한 결과, 13,251 GE로 구현되었으며, 최대 동작주파수는 200 MHz로 예측되었다. This paper describes an area-efficient design of SHA-256 hash function that is widely used in various security protocols including digital signature, authentication code, key generation. The SHA-256 hash processor includes a padder block for padding and parsing input message, so that it can operate without software for preprocessing. Round function was designed with a 16-bit data-path that processed 64 round computations in 128 clock cycles, resulting in an optimized area per throughput (APT) performance as well as small area implementation. The SHA-256 hash processor was verified by FPGA implementation using Virtex5 device, and it was estimated that the throughput was 337 Mbps at maximum clock frequency of 116 MHz. The synthesis for ASIC implementation using a $0.18-{\mu}m$ CMOS cell library shows that it has 13,251 gate equivalents (GEs) and it can operate up to 200 MHz clock frequency.

쌀 생산 및 소비에 따른 지역 간 청색 가상수 흐름 추정을 통한 지역 수자원의 기여도 분석

이상현,최진용,유승환,김윤형,Lee, Sang-Hyun,Choi, Jin-Yong,Yoo, Seung-Hwan,Kim, Yoon Hyung 한국농공학회 2016 한국농공학회논문집 Vol.58 No.1

The aim of this study is to analyze the contribution of regional water resources through the gap between water used for rice production and water used for consumption. The blue water use for rice production and for consumption was quantified and the regional blue water flows were estimated using the virtual water concept from 1995 to 2010. About $1134.4Mm^3/yr$ of blue water flowed among the provinces and metropolises of Korea, and about 28.5 % of total blue water flows came from Jeonnam province. In addition, blue water usage for rice was classified into three categories: water for production, internal consumption, and overproduction in each region. In Jeonnam, $633.8Mm^3/yr$ of blue water totally used for rice production, and 50.9 % and 15.5 % were used for external and internal rice consumption, respectively. The other 33.6 % was used for over production of rice for food security. This study assumed the blue water flows depended on the gap between virtual water use for rice production and consumption. However, the analysis of regional blue water usage and flows might show the importance of other region's water resources, and make policy decision-makers aware of the integrated water management among the regions.

지역 간 시계열 인구이동의 정량적 특징 분석 및 인구이동 네트워크의 연결중심성 분석

이상현,오윤경,Lee, Sang-Hyun,Oh, Yun-Gyeong 한국농공학회 2017 한국농공학회논문집 Vol.59 No.5

In this study, we visualized the regional migration in Korea from 2001 to 2015 using the Chord diagram which can represents amount of migration and flows at the same time. In addition, we constructed a migration network and analyzed the degree centrality of each region for identifying the main regions linking to various regions. In 2001~2005, most of population moved into Geonggi from various regions. However, the capital function was transferred to Sejong in 2011~2015, and population moving into Sejong and Chungnam was increased significantly. The main outflow of population in migration network were shown at the regions in Jeonbuk and Gyeongbuk province in 2001~2004, and recently the regions in Gyeongnam, Gyeonggi, and Seoul were identified as the main nodes in terms of outflow of population. We also focused on migration in rural area through degree centrality, and cord diagram in Chungnam, Jeonbuk, and Jeonnam where include the representative crop area. In 2015. there was the significant increase of migration from Gyeonggi to Chungnam, and internal migration within Jeonbuk increased rather than cross-border migration. In addition, migration from Jeonam to capital area decreased in 2015 but migration among cities within Jeonman increased. In particular, Yesan-gun showed the significant migration to other cities in Jeonnam. Population is necessary to develop community and sustain economic growth in rural regions. Therefore, migration is important for the transfer of manpower. The strength of this study is to approach the temporal change of migration from the viewpoint on quantitative and structural characteristics.

RapidEye 위성영상의 시계열 NDVI 및 객체기반 분류를 이용한 북한 재령군의 논벼 재배지역 추출 기법 연구

이상현,오윤경,박나영,이성학,최진용,Lee, Sang-Hyun,Oh, Yun-Gyeong,Park, Na-Young,Lee, Sung Hack,Choi, Jin-Yong 한국농공학회 2014 한국농공학회논문집 Vol.56 No.3

While utilizing high resolution satellite image for land use classification has been popularized, object-oriented classification has been adapted as an affordable classification method rather than conventional statistical classification. The aim of this study is to extract the paddy field area using object-oriented classification with time series NDVI from high-resolution satellite images, and the RapidEye satellite images of Jaeryung-gun in North Korea were used. For the implementation of object-oriented classification, creating objects by setting of scale and color factors was conducted, then 3 different land use categories including paddy field, forest and water bodies were extracted from the objects applying the variation of time-series NDVI. The unclassified objects which were not involved into the previous extraction classified into 6 categories using unsupervised classification by clustering analysis. Finally, the unsuitable paddy field area were assorted from the topographic factors such as elevation and slope. As the results, about 33.6 % of the total area (32313.1 ha) were classified to the paddy field (10847.9 ha) and 851.0 ha was classified to the unsuitable paddy field based on the topographic factors. The user accuracy of paddy field classification was calculated to 83.3 %, and among those, about 60.0 % of total paddy fields were classified from the time-series NDVI before the unsupervised classification. Other land covers were classified as to upland(5255.2 ha), forest (10961.0 ha), residential area and bare land (3309.6 ha), and lake and river (1784.4 ha) from this object-oriented classification.

평균역학고도장과 인공위성고도계 자료를 이용한 동해 표층해류 추산

이상현,변도성,최병주,이은일,Lee, Sang-Hyun,Byun, Do-Seong,Choi, Byoung-Ju,Lee, Eun-Il 한국해양학회 2009 바다 Vol.14 No.4

인공위성 고도계로 측정한 해수면 높이 자료를 사용하여 준 실시간 동해 표층해류를 추정하기 위해, 세 가지 방법으로 평균 역학지형(또는 평균 해류장)을 계산하고 각각의 특징들을 살펴보았다. 프랑스 AVISO(Archiviing, Validation and Interpretation of Satellite Oceanographic data)는 인공위성 고도계 자료와 수치모델을 이용하여 전 지구 해양에 대하여 수평적으로 $0.25^{\circ}$의 해상도를 갖는 평균 역학지형을 계산하고 지형류 방정식을 적용하여 평균 해류장을 만들어 제공하고 있다. 동해에서 장기간 관측한 수온과 염분 자료를 사용하여 500 dbar를 기준면으로 사용한 역학적 해면(steric height)을 계산하고 이를 평균 여각지형으로 환산하였다. 또한 14년 동안 동행의 표층을 이동한 표층뜰개들(ARGOS)의 궤적을 이용하여 평균 해류장을 구하였다. 인공위성 고도계로 관측한 해수면 편차와 세 가지 평균 역학지형을 합하여 절대 역학지형을 얻고, 각각의 절대 역학지형에 지형류 방정식을 적용하여 세 가지 표층해류를 추정하였다. 각 방법으로 추정된 표층해류를 2005년에 동해 남서부 해역에서 선박장착 초음파 해류계(ADCP)로 관측한 해류 자료와 정량적으로 비교하였다. 육지에서 50 km 이상 떨어진 해역에서는 인공위성 고도계로 측정한 해수면 자료에 지형류 방정식을 적용하여 구한 표층해류와 현장 관측 해류의 상관계수(R)가 0.58~0.73이며 두 자료의 제곱 평균 제곱근 편차(Root Mean Square Deviation, RMSD)는 $17.1{\sim}21.8cm\;s^{-1}$이다. 육지에서 50 km 이내의 연안에서 두자료의 R이 0.06~0.46로 상대적으로 낮고 RMSD는 $15.5{\sim}28.0cm\;s^{-1}$이다. 이처럼 연안에서는 인공위성 고도계로 관측한 해수면 높이 자료의 오차가 크므로 향후 연안에 대해서는 새로운 표층해류 추정 방법에 대한 추가 연구가 필요하다. In order to estimate sea surface current fields in the East Sea, we examined characteristics of mean dynamic topography (MDT) fields (or mean surface current field, MSC) generated from three different methods. This preliminary investigation evaluates the accuracy of surface currents estimated from satellite-derived sea level anomaly (SLA) data and three MDT fields in the East Sea. AVISO (Archiving, Validation and Interpretation of Satellite Oceanographic data) provides a MDT field derived from satellite observation and numerical models with $0.25^{\circ}$ horizontal resolution. Steric height field relative to 500 dbar from temperature and salinity profiles in the East Sea supplies another MDT field. Trajectory data of surface drifters (ARGOS) in the East Sea for 14 years provide another MSC field. Absolute dynamic topography (ADT) field is calculated by adding SLA to each MDT. Application of geostrophic equation to three different ADT fields yields three surface geostrophic current fields. Comparisons were made between the estimated surface currents from the three different methods and in-situ current measurements from a ship-mounted ADCP (Acoustic Doppler Current Profiler) in the southwestern East Sea in 2005. For offshore areas more than 50 km away from the land, the correlation coefficients (R) between the estimated versus the measured currents range from 0.58 to 0.73, with 17.1 to $21.7\;cm\;s^{-1}$ root mean square deviation (RMSD). For coastal ocean within 50 km from the land, however, R ranges from 0.06 to 0.46 and RMSD ranges from 15.5 to $28.0\;cm\;s^{-1}$. Results from this study reveal that a new approach in producing MDT and SLA is required to improve the accuracy of surface current estimations for the shallow costal zones of the East Sea.

식품 소비 및 칼로리 공급 변화에 따른 가상수 소비량의 변화 분석

이상현,최진용,유승환,Lee, Sang-Hyun,Choi, Jin-Yong,Yoo, Seung-Hwan 한국농공학회 2015 한국농공학회논문집 Vol.57 No.3

The agricultural water management generally has focused on water resources for crop production but it could be affected by the food consumption pattern. The aim of this study is to estimate virtual water consumption for food consumption and calorie supply using the water footprint and virtual water concept. In addition, we estimated the virtual water requirements for increasing the food and calorie self-sufficiency adjusted by the government for food security. About $330.0m^3/cap/yr$ of virtual water was consumed for the main foods consumption in 1985, and it was increased to $450.0m^3/cap/yr$ in 2010. The rate of virtual water consumption by meats consumption was 28 % in 1985 but it was increased to 54 % in 2010. In other words, the total virtual water consumption by foods consumption was increased from 1985 to 2010 with the high rate of meats consumption. The average $1.29m^3$ of virtual water was consumed for supplying 1 calorie per capita in 2010 but about $10.1m^3/cal$ of virtual water was consumed by only bovine meats consumption. The food self-sufficiency is the main factor for food security in Korea. About $46.5Mm^3$ and $393.9Mm^3$ of virtual water were required in order to increase the food and calorie self-sufficiency of wheat by 1 % individually. This study showed the water consumption was related to food consumption and calorie supply pattern, and these results could be used as the indices for the agricultural water management considering the change of eating habit and food security.