http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
난연재를 함유한 복합소재 사출성형 공정 특성에 관한 실험적 연구
이상원(S. W. Lee),구본상(B. S. Koo),김진우(J. W. Kim),신혜원(H. W. Shin),이지환(J. H. Lee) Korean Society for Precision Engineering 2021 한국정밀공학회 학술발표대회 논문집 Vol.2021 No.11월
최근 전기차, 자율주행차, 도심 항공 모빌리티 등 미래 이동 수단에 대한 관심이 증대함에 따라 연비 향상을 위한 부품의 경량화 및 우수한 기계적 특성을 가진 부품 생산 기술에 대한 수요가 증가하고 있다. 기존의 여러 부품을 조립하는 공정 대신 생산 사이클이 짧고, 복잡한 형상을 제작하기 수월한 사출성형 공정을 이용한 부품 생산 기술에 대한 관심이 증대하고 있다. 특히 첨단 부품의 경량화를 위해 플라스틱 재료가 기존의 철강 재료를 대체하고 있는 추세이고, 소재 특성의 향상을 위해 난연제가 함유된 복합소재 부품 성형 기술도 시도되고 있다. 이러한 복합소재 사출성형 공정은 단일 소재 기반 사출성형 공정과 비교하여 매트릭스와 필러의 배합비율에 따른 유변학적 특성이 달라지므로 공정 특성 분석 및 성형 품질에 관한 체계적인 연구가 필요하다. 따라서, 본 연구에서는 자동차 부품의 재료로 사용되는 열가소성 플라스틱 중 하나인 폴리아미드 PA6 와 인계 난연제인 OP1230 을 각각 85 와 15 wt% 비율로 혼합하여 제조한 난연 복합소재를 사용하여 사출성형 공정 특성 분석을 수행하였다. 공정 변수는 배압, 사출 속도, 보압, 관측 인자로는 Sink Mark, Product Weight 를 선정하였고, 실험 설계는 3 가지 공정 변수에 대해 3 수준의 완전 요인 설계를 통해 총 27 가지 공정 조건을 도출하였다. 각 공정 조건에 대해 5 회의 반복 성형품을 얻었으며 공정 변수에 따른 관측 인자의 성형 품질을 분석하였다.
소화 효소 및 시간에 따른 고섬유소 사료의 In vitro 소화율 측정법
오서영(S. Y. Oh),이민영(M. Y. Lee),김재만(J. M. Kim),이지환(J. H. Lee),윤원(W. Yun),송태화(T. H. Song),정연근(Y. K. Cheong),조진호(J. H. Cho) 충북대학교 동물생명과학연구소 2015 동물생명과학연구 Vol.7 No.-
This study was conducted to investigate assay of high fiber diet in vitro digestibility according to digestive enzyme and time. Treatment of this study included: 1) CON (basic method) 2) T1 (sample amount: 2 times; enzyme level: 2 times) 3) T2 (sample amount: 2 times, enzyme level: 2 times, assay time: 1.5 times) 4) T3 (sample amount: 2 times, enzyme level: 2 times, assay time: 2 times). With regard to dry matter (DM), organic matter (OM) digestibility, T3 and CON were higher than T1 and T2 (P<0.05). Also, with regard to DM and OM digestibility by time of digestion, base was similar T2. In conclusion, in vitro digestibility was closely related to digestion time.
다양한 옥수수 입자도가 In vitro 소화율에 미치는 영향
이지환(J. H. Lee),이창희(C. H. Lee),오서영(S. Y. Oh),윤원(W. Yun),유도일(D. I. Yoo),조진호(J. H. Cho) 충북대학교 동물생명과학연구소 2016 동물생명과학연구 Vol.8 No.-
This study was conducted to investigate the effect of various corn size as energy source In vitro digestibility in pigs. Treatment of this study included: 1) T1 (particle size : 200 microne) 2) T2 (particle size : 300 microne) 3) T3 (particle size : 400 microne) and 4) T4 (particle size : 800 microne). With regard to dry matter (DM) or organic matter (OM) digestibility, T1 were higher than T2, T3 and T4 (p<0.05). Also, T3 was similar to T4. In conclusion, DM and OM were affected by particle size in In vitro total tract digestibility.
TiAl 계 금속간화합물의 반응합성온도에 미치는 압출과 승온속도의 영향
박원구,황선근,김석준,이태원,이지환 대한금속재료학회(대한금속학회) 1995 대한금속·재료학회지 Vol.33 No.10
This paper was focused to investigate the effect of extrusion and heating rate on the reactive synthesis and the microstructure of products formed by reactive synthesis. The mixing of elemental powders was carried out by V-blender. The mixed powders were canned, sealed under vacuum, and were hot extruded at 450℃ under extrusion ratio 20 : 1. For powder extruded and cold compacted specimens, thermal analysis have been performed. In the effect of extrusion, the ignition temperature(T₁) of extruded specimens was found to be lower than that of cold compacted specimens. This may be due to breakdown of aluminium oxide films and elongation of mixed powders by hot plastic-deformation. In the effect of heating rate, both ignition temperature(T₁) and combustion temperature(T_c) was found to be increased with increasing heating rate. In particular, the ignition temperature of extruded specimens was below the melting temperature of aluminium under the heating rate of 40℃/min. Also, phase of reaction products depended upon combustion temperature. Microstructure of reaction products consists of unreacted titanium, TiAl and Ti₃Al. However, unreacted titanium was not observed after heat treatment.