http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
TIG용접에서 가스력을 이용한 비드형상제어를 위한 실드가스 노즐의 최적 형상에 관한 연구 (I) - 벤투리노즐의 설계 및 성능분석 -
함효식,서지석,최윤환,이연원,조상명,Ham, Hyo-Sik,Seo, Ji-Seok,Choi, Yoon-Hwan,Lee, Yeon-Won,Cho, Sang-Myung 대한용접접합학회 2011 대한용접·접합학회지 Vol.29 No.3
Bead shape control with gas force process has been developed to overcome the concave back bead in pipe orbital welding. However, It is impossible to make a convex back bead using the existing gas nozzle, because it has high gas-consuming and low gas force. The purpose of this paper, to develop optimum shape of nozzle which to reduce the consumption of gas, maximizing the shield gas force with low cost and high productivity coincide the Green welding. In this paper venturi-type nozzle was designed by using the Venturi meter and compared velocity, pressure, arc shape in the flat position with existing CP-nozzle. As a result, Venturi-type nozzle's maximum velocity and pressure was improved at the same flow rate. Also heat input was increased by the arc contraction in the flat position.
위보기 및 경사상진자세의 TIG 용접에서 비드 성형기의 물리적 힘에 의한 용융지 제어
함효식,하종문,이병우,조상명,Ham, Hyo-Sik,Ha, Jong-Moon,Lee, Byung-Woo,Cho, Sang-Myung 대한용접접합학회 2010 대한용접·접합학회지 Vol.28 No.6
Due to excellent weld quality, orbital welding with TIG is widely applied to pipe welding. But concave back bead is formed easily in overhead and inclined-up position of butt orbital welding. It is difficult to find a paper to overcome this problem. In this study, in order to make convex back bead in overhead and inclined-up position of pipe 5G welding, control method of molten pool was actively investigated. Melt run welds were conducted on thickness 4.0mm SS400 with overhead and inclined-up position and was observed the variation of bead shape after welding with the bead former developed. The height of back bead showed the trend of increase as the distance from molten pool to the bead former was decreased. Also, there is no trend in the bead width of front and back as welding position was changed or the distance from molten pool to the bead former was decreased.
A-TIG 용접에서 용입 형상비에 미치는 아크길이와 실드가스의 영향
박인기,함효식,조상명,Park, In-Ki,Ham, Hyo-Sik,Cho, Sang-Myung 대한용접접합학회 2008 대한용접·접합학회지 Vol.26 No.6
TIG welding enables to produce high quality weldment. However it has some problems such as shallow penetration and large distortion due to low penetration aspect ratio after welding. In order to overcome those problems, there are many ongoing studies on A-TIG welding, which use active flux. In this study, the effect of arc length and shield gas on penetration aspect ratio with melt-run welding on STS 304 6t, on which active flux was spreaded, was investigated. Arc length was changed from 1mm to 3mm, and aspect ratio became higher as arc length was decreased in this range. 100% Ar gas, Ar-$H_2$ mixed gas, Ar-He mixed gas, and 100% He gas were used as shield gas in this study. When Ar-$H_2$ mixed gas, Ar-He mixed gas, and 100% He gas were applied, penetration and melting efficiency were both increased as compared with 100% Ar gas. Aspect ratio was the highest with Ar-2.5% $H_2$ mixed gas.
안드로이드 악성코드 탐지 성능 향상을 위한 Feature 선정
김환희 ( Hwan-hee Kim ),함효식 ( Hyo-sik Ham ),최미정 ( Mi-jung Choi ) 한국정보처리학회 2013 한국정보처리학회 학술대회논문집 Vol.20 No.2
안드로이드 플랫폼은 타 모바일 플랫폼보다 보안에 있어서 더 많은 취약점을 안고 있다. 따라서 현재 발생하고 있는 대부분의 모바일 악성코드는 안드로이드 플랫폼에서 발생하고 있다. 현재 악성코드 탐지 기법 중 기계학습을 도입한 방법은 변종 악성코드의 대처에 유연하다. 하지만 기계 학습기법은 불필요한 Feature 를 학습데이터로 사용할 경우, 오버피팅이 발생하여 전체적인 성능을 저하시킬 수 있다. 본 논문에서는 안드로이드 플랫폼에서 발생하는 리소스를 모니터링하여 Feature vector 를 생성하고, Feature-selection 알고리즘을 통하여 Feature 의 수에 따라 기계학습 Classifier 를 통한 악성코드 탐지의 성능지표를 보인다. 이를 통하여, 기계학습을 통한 악성코드 탐지에서 Featureselection의 필요성과 중요성을 설명한다.
SVM(Support Vector Machine)을 이용한 안드로이드 기반의 악성코드 탐지
김기현 ( Ki-hyun Kim ),함효식 ( Hyo-sik Ham ),최미정 ( Mi-jung Choi ) 한국정보처리학회 2013 한국정보처리학회 학술대회논문집 Vol.20 No.2
모바일 단말은 다양한 서비스와 컨텐츠를 지원하지만, 최근 모바일 악성코드의 급증으로 인하여 사용자에게 개인 정보 유출, 요금 과다 등의 피해를 초래하고 있다. 특히, 안드로이드 플랫폼은 오픈 플랫폼으로서 공격자들이 악성코드를 배포하기에 유리한 환경을 가지고 있어 시그니처/행위기반 분석방법을 통한 악성코드 탐지 연구가 활발히 진행되고 있다. 본 논문에서는 안드로이드 플랫폼에서 악성코드를 탐지하기 위한 Feature 를 선정하였다. 또한 SVM(Support Vector Machine) 기계학습 알고리즘을 통하여 악성코드 탐지성능을 분석하고 우수성을 검증하였다.