http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이승아(SeungA Lee),한현각(HyunKak Han) 한국산학기술학회 2021 한국산학기술학회논문지 Vol.22 No.8
분쇄는 고체를 압축, 충격 작용으로 하나의 입경에서 더 작은 입경으로 만드는 것으로, 화학공학, 식품공학, 광물공정, 세라믹, 전기전자제품 생산과 입자공학에 중요한 단위공정이다. 분쇄의 목적은 고체의 표면적을 증가시켜 연소반응의 속도를 높이고, 건조나 추출의 속도를 증가시키며, 입도를 작게 함으로서 고체의 혼합을 용이하게 하거나 분체의 색상을 개선하기 위함이다. 알루미나 불리 우는 알루미늄 산화제는 실리카와 함께 세라믹스의 주요 재료로 사용되고 있으며, 전기적으로 절연체고, 높은 열전도성과 내마모성, 화학적 안정성을 갖는 파인 세라믹 물질이다. 본 연구에서는 볼밀에서 알루미나의 분쇄에 대하여 연구하였다. 입도분포는 입도분석기와 SEM 사진으로부터 Mex 프로그램을 사용하여 얻었다. 볼과 알루미나의 충진률이 10% 이내에서 분쇄가 일어났다. 충진률이 10% 이상에서는 뭉침 현상이 관찰되었다. 볼밀 공정에서, RPM과 조업시간(24시간, 12시간, 6시간은) 입경감소와 입도분포 변화에 많은 영향을 미치지 못하였으며, 최적 조업조건은 500RPM과 12시간이었다. 뭉침 현상을 방지하기 위하여 분산제(sodium tripolyphosphate, sodium polyacrylate, and Brij(R)35)를 사용하였으며 Sodium tripolyphosphate가 가장 좋은 결과를 보였다. Comminution is the reduction of solid materials from one particle size to a smaller particle size by impact and compression and is an important unit operation of chemical engineering, food engineering, mineral processing, ceramics, electronics manufacturing, and particle technology. Aluminum oxide (alumina) is an electrical insulator with relatively high thermal conductivity for a fine ceramic material. The particle size distribution was obtained using a particle size analyzer and Mex program from an SEM image. This study examined the size reduction of alumina by ball milling. Comminution occurred within a 10% volume-filling rate of the ball and alumina. Agglomeration was observed over the 10 % filling rate. In the ball mill operation, RPM and operation time (24 hours, 12 hours, and 6 hours) had a slight effect on the particle size reduction and particle size distribution. The optimal operation conditions were 500RPM and 12 hours. Dispersion agents (sodium tripolyphosphate, sodium polyacrylate, and Brij(R)35) were used to inhibit agglomeration. Sodium tripolyphosphate was found to be a good dispersion agent.
Steering wheel에 적용 가능한 발열소재 개발
강혜진(Hyejin Kang),권칠선(Chilsun Kwon),한현각(Hyunkak Han) 한국자동차공학회 2009 한국자동차공학회 학술대회 및 전시회 Vol.2009 No.11
Heating steering wheel which was made by mixing with heating material and PP(Polypropylene) and paint was investigated. The prototype steering wheel made by master batch, catapulting and coextrusion. The temperature of heating steering wheel was measured by thermal performance camera and infrared. The surface temperature of steering wheel was rised to 42.5℃ within 10min, and the temperature distribution in the steering wheel was 4.8℃
이석용,한현각 순천향대학교 부설 산업기술연구소 1997 순천향 산업기술연구소논문집 Vol.3 No.1
Temperature distribution and air flow rate in the simplified chamber are investigated by Fluent Code. Fluent Code is general purpose computer program for modeling fluid flow, heat transfer and chemical reaction. In this chamber the forced convection is generated by heater and fan. In the simulation, the Navior-Stoke's equation and standard k - εmodel for turbulent heat transfer equation is used. In the result, the simulated temperature distribution is good agreement with calculated ones.