http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
중소규모 하수처리장의 탈질$\cdot$탈인 PICD 시스템 실용화기술개발
한상배,노명규,정보림,장덕,서성철,홍기호,성문성 한국환경기술인연합회 2000 환경기술인 Vol.172 No.-
G-7 환경기술연구개발 3단계사업의 일환으로 `98년도부터 (주)그린기술산업과 건국대학교에서 연구 수행중인 PICD(Phased Isolation Intra Clarifier Ditch)시스템은 중소규모 하수처리장의 유입부하변동에 대해 안정적이고, 신축적인 운전이 가능한 탈질$\cdot$탈인 공정이다. 국내는 물론 미국 및 중국 특허를 획득한 본 시스템은 기존의 내부순환포함 다단 완전혼합형 영양염류제거공정과는 달리 침전지를 산화구에
차량경량화를 위한 듀얼 레이저 에너지 플라스틱 접합의 응용
한상배,최해운,Han, Sang Bae,Choi, Hae Woon 대한용접접합학회 2013 대한용접·접합학회지 Vol.31 No.4
Laser heat source was used for automotive interior and exterior parts to reduce weights. Typically, 900's nm wavelength of laser has been widely used for polymer joining, however, the transmittance of the laser beam thorough clear polymers such as PMMA or PC has been an issue to overcome. To solve this issue, 1,940nm laser was applied on the clear polymer for the better absorption and 900nm laser beam was used for main laser for the joining. Conventional Gaussian or Elliptical heat source approximation has limitation in polymer which had deeper skin depth where major laser beam absorbs. To accurately simulate the physical laser beam absorption and joining optical properties were experimentally measured for the computer FEM simulation. The simulation results showed close correlation between theoretical and experimental results. The developed laser process is expected to increase productivity and gap closing which can cause failure of joining in laser material processing.
회전체 원판의 볼트구멍에 존재하는 모서리균열의 유한요소해석
한상배,이진호,김영진 대한기계학회 1993 대한기계학회논문집 Vol.17 No.12
The objective of this paper is to obtain stress intensity factor solutions for a corner crack originating at bolt holes in a rotating disc. Initially two-dimensional finite element analyses of a rotating disc with bolt holes are performed to determine the maximum stress region. Subsequently three-dimensional finite element analyses of a rotating disc with a corner crack originating at the bolt holes are performed with a variety of crack geometries. According to the numerical results, the maximum stress intensity factor, with an increase in crack depth ratio, was observed at the surface of the plate due to the interference effect of corner crack and disc bore.
Anti-inflammatory Effect of Trichostatin-A on Murine Bone Marrow-derived Macrophages
한상배,이재권 대한약학회 2009 Archives of Pharmacal Research Vol.32 No.4
Histone deacetylase (HDAC) inhibitors were recently shown to suppress inflammatory responses in models of autoimmune and inflammatory diseases. In this study, the anti-inflammatory effects of five different HDAC inhibitors on lipopolysaccharide-(LPS)-stimulated macrophages were compared and the mechanisms of these effects were demonstrated. Trichostatin-A (TSA) and scriptaid, two of the five HDAC inhibitors, showed the most potent inhibitory effects on the nitric-oxide (NO) production of RAW264.7 cells and bone-marrowderived macrophages (BMDMs). TSA significantly decreased the mRNA and protein levels of the proinflammatory cytokines, such as tumor necrosis factor (TNF)-α, interleukin (IL)-6, and IL-1β, whereas the pretreatment with TSA increased the level of the immunosuppressive cytokine IL-10. TSA also reduced the cell surface markers of the maturity of the macrophages. Furthermore, a longer duration (up to 8 h) of hyperacetylation was observed in the cells that had been exposed to TSA, whereas the hyperacetylation induced by the other HDAC inhibitors was absent after 8 h. These results demonstrated that TSA is the most potent HDAC inhibitor of histone deacetylation and has the greatest ability to induce anti-inflammatory activity in cloned and naïve macrophages. These results are expected to serve as a guide for future studies on the ability of HDAC inhibitors to inhibit acute and chronic inflammatory diseases.