http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
하백현,남궁식,김기호 한국화학공학회 1965 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.3 No.2
The Catalytic activities of domestic kaolines treated with hydrochloric and sulfuric acid were checked by the cracking of n-pentane, propane and disproportionation reaction of toluene. Proportionality between the acidity of acid treated kaoline measured by Hara's method and specific reaction rate of disproportionation of toluene and decomposition of n-pentane was observed.
LaM 상에서 암모니아와 메탄올로부터 메틸아민의 합성시 반응조건이 활성과 선택성에 미치는 영향
하백현,조원동,강동헌 한국화학공학회 1999 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.37 No.4
수소형 모더나이트(HM)와 이를 lanthanum 이온으로 이온교환한 LaM를 만들고 그의 구조적인 특성변화를 XRD, 산성을 IR에 의하여 측정하고 암모니아와 메탄올로부터 메틸아민 반응에서 반응온도, 반응압력, 접촉시간 및 암모니아/메탄올의 비를 변화시키며 활성과 DMA의 선택성을 연구하였다. 두 시료의 경우 모두 활성과 선택성의 변화는 80h 내에서는 일어나지 않았으며 온도상승에 따라 활성이 증가하며 온도에 따라 전화율의 변화가 큰 영역에서 DMA의 선택성이 가장 크다. LaM이 HM보다 활성은 좀 떨어지나 DMA의 선택성비 커서 HM의 30%에 비해 약 최대 50%를 나타내었다. 암모니아/메탄올의 비의 증가에 따라 알코올의 전화율이 증가하고 space velocity의 증가에 따라서는 전화율이 감소하나 space velocity가 2-4h^(-1)이상에서는 거의 변화가 없었다. 반응압력의 증가는 MMA의 생성을 급격히 감소시키며 DMA의 선택성을 증가시켰으나 약 4atm 이상에서는 전화율에 크게 영향을 주지 못했다. Hydrogen mordenite(HM) was ion-exchanged with lanthanum to give LaM and these catalysts were characterized by using XRD for crystallinity and IR for acidities/structures of the catalysts. The effects of reaction conditions such as reaction temperature, pressure, contact time and ratio of ammonia/methanol on the catalytic activity of methylamine synthesis and the selectivity to dimethylamine(DMA) were investigated from ammonia and methanol. The catalytic activity and DMA-selectivity of these catalysts remained for 80 h, and maximum selectivities of DMA were obtained at temperature range of methanol was rapidly converted. The DMA selectivity on LaM was 50% which was larger than that of 30% obtained on HM. The conversion of methanol increased with the ratio of ammonia/methanol and decreased with space velocity, but for the space velocity, 2-4 h^(-1) it was constant. The elevation of reaction pressure rapidly reduced the amount of produced monomethlamine, but increased selectivity of DMA up to 4 atm.
초음속 축소 - 확대 노즐 수치해석 및 충돌판 충돌형 젯트 밀의 분쇄 특성
하백현,길준호 한국화학공학회 1998 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.36 No.4
본 연구에서는 전산유체역학 CODE인 FLUENT^(TM)을 이용하여 여러 가지 형상의 초음속 축소-확대 노즐에 대한 기-고혼합체의 속도분포 수치해석을 다루었고, 충돌판 충돌형 젯트 밀의 분쇄특성을 연구하였다. 수치해석 결과와 실험결과가 잘 일치하는 것을 알 수 있었고, 분쇄효율 관점에서 최적 노즐 형상을 선정할 수 있었다. 그리고 다음 인자들의 관점에서 최적 분쇄 조건을 조사하였다: 분쇄 압력, 노즐출구에서 충돌판까지의 거리, 젯트기류 방향과의 충돌판 각도, 중량 혼합비, 그 결과 충돌거리는 노즐 출구 직경의 2-3배 거리, 충돌판 각도는 60-90°, 중량 혼합비는 0.5보다 작은 범위가 최적인 것을 발견할 수 있었다. In this study, we dealt with numerical analysis of the velocity distribution in the flow of gas-solid mixture about the various shapes of supersonic convergent-divergent nozzle by using the computational fluid dynamics CODE, FLUENT^(TM). We also studied grinding characteristic of a target-type jet mill. It was found that the results of the present numerical analysis and experiment were in good agreement. We could select the optimum nozzle shape with respect to the grinding efficiency. And then the optimum grinding condition were investigated with respect to the following parameters : the grinding pressure, the distance from the nozzle outlet to the target plate, the angle between the jet flow direction and target surface, and the mixing ratio by weight. The results show that the optimum conditions of the collision length, target angle, and mixing ratio are 2-3 times the distance of the nozzle outlet diameter, 60-90°, and〈0.5, respectively.