http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
배관 해석 프로그램을 통한 해수담수화 플랜트 수압 시스템 분석
최지혁,최용준,양흥식,이상호,최준석 대한상하수도학회 2020 상하수도학회지 Vol.34 No.3
In actual seawater desalination plant, the pressure loss due to frictional force of pipe is about 3~5 bar. Also, the pressure loss at pipe connection about 1~3bar. Therefore, the total pressure loss in the pipe is expected to be about 4~8 bar, which translates into 0.111 to 0.222 kWh/m3 of energy when converted into the Specific Energy Consumption(SEC). Reducing energy consumption is the most important factor in ensuring the economics of seawater desalination processes, but pressure loss in piping is often not considered in plant design. It is difficult to prevent pressure loss due to friction inside the pipe, but pressure loss at the pipe connection can be reduced by proper pipe design. In this study, seawater desalination plant piping analysis was performed using a commercial network program. The pressure loss and SEC for each case were calculated and compared by seawater desalination plant size.
담수화 플랜트 성능 개선을 위한 막증발법 모듈 개념 설계
최지혁,이상호,최용준,주재현,박영규 한국공업화학회 2019 한국공업화학회 연구논문 초록집 Vol.2019 No.0
막증발법(MD)은 저비용의 열에너지와 다공성 분리막을 이용하는 탈염기술이다. 막 증발법은 역삼투막 공정(RO)과 결합하여 기존 공정이 가지는 회수율의 한계를 극복하고 담수화 플랜트의 성능을 개선시킬 수 있다. 본 연구에서는 직접 접촉식 막증발법(DCMD) 공정과 진공식 막증발법(VMD) 공정에 관한 해석모델을 구축하여 모듈 특성과 운전 변화에 따른 성능해석을 수행하였다. MD 공정의 성능해석을 위해서는 물질전달과 열전달을 동시에 고려해서 해석을 진행하여야만 한다. 공학용 계산 프로그램인 MATLAB을 사용하여 물질전달과 열전달을 동시에 해석할 수 있는 코드를 제작하였으며, 분리막 및 모듈의 사양과 운전조건을 입력하면, 열효율(Production ratio, PR), 평균플럭스, 평균회수율 및 모듈 위치별 여과플럭스를 계산할 수 있도록 하였다. 모델 해석결과 DCMD에서는 모듈의 길이가 길어질수록, 집적도가 높아질수록 PR이 낮아지며, VMD의 경우 모듈의 길이와 집적도가 큰 영향을 미치지 않는 것으로 해석되었다.
구동력이 다른 두 공정에서 파울링 제어를 위한 에어레이션 도입
최지혁,위다영,주재현,최용준,이상호 한국공업화학회 2019 한국공업화학회 연구논문 초록집 Vol.2019 No.1
정밀여과(Microfiltration, MF)는 정수 및 물 산업에서 널리 적용되어 있는 공정이다. 정밀여과는 공급 용액이 압력에 의해 막을 통과하면서 표면을 따라 흐르기 때문에, 고형분이 높은 액체 분리에 적용 가능하다. 막증발법(Membrane distillation, MD)은 다공성 소수성 막을 사용하여 온도차로 발생하는 증기압에 의해 담수 분리가 가능한 공정이다. 막증발법은 이론상 제거율이 99% 이상이며, 재사용 에너지를 사용할 수 있는 장점이 있다. 두가지 공정에서 막 오염(Membrane fouling)은 가장 심각한 문제이다. 막 오염은 막 표면의 유효 막 면적을 감소시켜 공정 효율을 감소시킨다. 따라서, 본 실험에서는 구동력이 다른 두가지 공정에서의 막오염 메커니즘을 확인하고, 막오염 제어를 위한 에어레이션을 도입하였고 에어레이션 유무에 따른 공정 효율을 비교하였다.
Design optimization of hollow fiber membrane distillation module using computational fluid dynamics
최지혁,이상호,최용준,신용현,조형락 한국공업화학회 2020 한국공업화학회 연구논문 초록집 Vol.2020 No.-
Hollow fiber membrane distillation (MD) modules have potential for practical application in large scales due to their high packing density and compactness. However, little information is available on the optimization of their design compared with the plate and frame MD modules. Accordingly, this study applied computational fluid dynamics (CFD) to analyze the hydrodynamics of hollow fiber MD modules, which allows the optimization of their shapes and dimensions. Various designs of MD modules were examined using the CFD models. The membrane area was fixed and the dimensions such as the length and diameter were adjusted.
최지혁,이상호,김유식,주재현,최용준 한국공업화학회 2020 한국공업화학회 연구논문 초록집 Vol.2020 No.-
This study aimed at the application of baffles to MD modules to mitigate heat losses by temperature polarization and performance degradation by membrane fouling. A laboratory-scale direct contact membrane distillation (DCMD) was used to investigate the effect of baffles on heat and mass transfer in the MD module. Computational fluid dynamics (CFD) simulation was carried out to theoretically analyze the experimental results. Different baffles including plate, orifice and propeller types were adopted and compared in terms of water flux, thermal efficiency, and the propensity of fouling by inorganic scales.
HTTP Host를 이용한 웹 어플리케이션 인식에 관한 연구
최지혁,김명섭,Choi, Ji Hyeok,Kim, Myung Sup 한국정보처리학회 2013 정보처리학회논문지. 컴퓨터 및 통신시스템 Vol.2 No.8
네트워크의 고속화와 다양한 응용 서비스의 등장으로 오늘날의 네트워크 트래픽은 복잡해지고 다양해졌다. 지금 이 순간에도 수 많은 응용들이 나타나고 사라지기를 반복하고 있는데, 이러한 다양한 트래픽의 변화에 현재의 트래픽 분류 시스템은 빠르게 대처 하지 못하고 있다. 본 논문에서는 이러한 문제점을 해결하기 위해 새롭게 출현하는 응용에 빠르게 대처할 수 있는 응용 인식 시스템을 제안한다. 응용 인식 시스템은 빠르게 변화하는 네트워크 환경에서 응용프로그램들의 이름을 인식하여 새로운 응용의 출현과 기존 응용의 변화 추이 등의 정보를 제공한다. 본 논문에서 빠르고 정확한 응용 인식을 위해 HTTP 프로토콜의 Host 필드를 이용한다. Host 필드의 domain정보를 추출하여 응용의 이름을 임시로 정하고 추후 관리자의 개입을 통해 응용의 이름을 확정 짓는 구조이다. 단순히 응용의 이름만을 알아내는데 그치지 않고 응용마다 고유의 Client IP를 카운팅하여 분석 대상 망에서 많이 사용된 응용들을 알아 낼 수 있다. 또한 응용 인식을 통해 나온 응용들을 트래픽 분류 시스템에 등록하여 기존에 분석 되지 않았던 새로운 응용들에 대한 분석도 가능하게 된다. 제안한 방법은 학내 망에서의 실험을 통해 결과를 도출하고 시나리오 별로 결과를 나눠서 분석함으로써 타당성을 증명하였다. Today's network traffic has become extremely complex and diverse since the speed of network became faster and a variety of application services appear. Moreover, many applications appear and disappear fast and continuously. However, the current traffic classification system does not give much attention to this dynamic change of applications. In this paper, we propose an application awareness system in order to solve this problem. The application awareness system can provide the information, such as the usage trend of conventional applications and the emergence of new applications by recognizing the application name in a rapidly changing network environment. In order to recognize the application name, the Host field of HTTP protocol has been utilized. The proposed mechanism consists of two steps. First, the system generates the candidates of application name by extracting the domain name from the Host field in HTTP packet. Second, the administrator confirms the name afterward. The validity of the proposed system has been proved through the experiments in campus network.
최지혁,송평중,Choi, J.H.,Song, P.J. 한국전자통신연구원 2001 전자통신동향분석 Vol.16 No.6
WCDMA 비동기 방식의 IMT-2000 규격 정립을 위해, 3GPP의 여러 실무 그룹에서 Release ’99, Release ’4 및 Release ’5에 대한 표준화가 동시에 이루어지고 있다. 본 고에서는 UTRA 프로토콜의 계층 2와 3 표준화를 담당하고 있는 3GPP TSG RAN WG 2의 규격의 표준화 현황 및 새로이 규격에 반영될 기술들에 대해 살펴본다.