http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
AR 플랫폼을 사용하지 않는 실제 방 기반 인테리어 시뮬레이션 연구
최규석,김준건,임창묵 한국인터넷방송통신학회 2022 한국인터넷방송통신학회 논문지 Vol.22 No.1
가구는 실내에서 다른 구조물과 잘 어울리는지 확인하는 것이 구매결정에 있어서 필수적이며 COVID-19 사태로인한 언택트 마케팅 상황에서는 더욱 중요한 요소가 되고 있다. 이에 따라 가구 배치 인테리어 시뮬레이션을 위해ARCore, ARKit 등 AR(Augmented Reality) 오픈 소스의 등장으로 AR을 이용한 길이 측정법이 등장하고 있는 추세이다. AR를 이용하는 이러한 기존 방식은 평면 카메라 이미지를 토대로 깊이 맵(Depth Map)을 생성하고 복잡한 입체화연산이 수반되는 방식이라 스마트폰을 사용하여 정확한 실내 크기 정보가 요구되는 작업에서는 한계가 드러난다. 본 논문에서는 ARCore, ARKit 사용 없이 스마트폰에 내장된 가속도 센서, 자이로스코프 센서만으로 정확한 실내 크기를측정하는 방법을 제안한다. 또한 제시된 기법을 이용한 활용 예제로 미리 디자인된 방 인테리어를 각방에 맞게 적용하는방법을 제시하였다. It is essential to make a purchase decision to make sure that the furniture matches well with other structures in the room. Moreover, in the Untact Marketing situation caused by the COVID-19 crisis, this is becoming an even more impact factor. Accordingly, methods of measuring length using AR(Augmented Reality) are emerging with the advent of AR open sources such as ARCore and ARKit for furniture arrangement interior simulation. Since this existing method using AR generates a Depth Map based on a flat camera image and it also involves complex three-dimensional calculations, limitations are revealed in work that requires the information of accurate room size using a smartphone. In this paper, we propose a method to accurately measure the size of a room using only the accelerometer and gyroscope sensors built in smartphones without using ARCore or ARKit. In addition, as an example of application using the presented technique, a method for applying a pre-designed room interior to each room is presented.
Carboxymethyl Chitin 의 합성 및 알칼리 토금속 이온의 흡착분리에 관한 연구
최규석,장병권,김종희,김용무 ( Kyu Suk Choi,Byung Kwon Chang,Chong Hee Kim,Yong Moon Kim ) 한국공업화학회 1991 공업화학 Vol.2 No.3
게껍질로부터 단리한 천연고분자인 chitin을 이용하여 특정금속이온에 대하여 높은 선택성을 갖는 carboxymethyl chitin을 합성하였다. 실험에 사용된 chitin은 개량한 Hackman법으로 순수한 상태로 제조하고 이를 여러농도의 수산화나트륨 용액으로 alkali chitin을 제조한 후, chitin 단위구조의 C-6위치(CH_2OH)를 isopropyl alcohol중에서 monochloroacetic acid로 처리하여 카르복시기를 갖는 유도체를 합성하였다. Kjeldahl 법에 의한 질소함량의 분석 및 원소분석에 의해 최적반응조건과 치환율을 구하였고, 이들 수지의 구조는 적외선흡수스펙트럼으로 확인하였다. 낮은 치환도를 가지며 물에 불용인 carboxymethyl chitin은 알칼리 토금속이온들 중 Ca^(2+) 이온에 대하여 가장 높은 선택적 흡착능을 나타내었으며, 이러한 성질은 KNO₃나 NaN0₃와 같은 중성염이 존재할 때에도 마찬가지였다. Carboxymethyl chitin에 결합된 Mg^(2+) 이온은 Ca^(2+)이온이 있는 곳에서 방출되며, 이러한 Ca^(2+) 이온에 대한 선택적 흡착능을 조사하기 위하여 Ca^(2+) 및 Mg^(2+) 이온 혼합계를 이용하였다. 합성된 흡착담체는 Ca^(2+), Mg^(2+), Sr^(2+), Ba^(2+) 등의 금속이온들과의 흡착특성을 검토하였고, 나아가 Na^+, K^+ 등 공통양이온 존재하에서 특정금속이온의 선택적 흡착능을 atomic absorption spectrometer로 정량, 확인하였다. Carboxymethyl chitin(CM-chitin) was prepared by the reaction of alkali chitin with monochloroacetic acid in isopropyl alcohol. According to the pH variation, the adsorptivity of this chelating polymer to the alkali-earth metal ions such as Ca^(2+), Mg^(2+), Sr^(2+), Ba^(2+) ions was determined by batch method. The adsorption tendency of this chelating polymer to most metal ions was increased with the increase of pH. The highest degree of adsorption was observed toward Ca^(2+) ion among the alkali-earth metal ions. The selective adsorption property toward Ca^(2+) ion was examined in the mixed solution of Ca^(2+) and Mg^(2+) ions, and it was observed that CM-chitin showed excellent selectivity to Ca^(2+) ion than Mg^(2+) ion. Mg^(2+) ion bound to CM-chitin was released from CM-chitin molecule in the presence of Ca^(2+) ion owing to low equilibrium constant. In the adsorption experiment of Ca^(2+) and Mg^(2+) ions to the CM-chitin under coexistence of Na^+ and K^+ ions, it was observed that adsorptivity of only Ca^(2+) ion was not affected by these monovalent cations.