http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
시멘트 분쇄 공정별 분말도 변화에 따른 모르터의 기초적 물성
김종백,차완호,권오봉,한민철,한천구 대한건축학회지회연합회 2006 대한건축학회지회연합회 학술발표대회논문집 Vol.2 No.1
To examine possibility to product particular cement appling control a specific particle character of cement, the study takes samples of OPC, minute particle cement and large particle cement of the progress to product OPC. to make progress a basic experimentation of mortar property. this is the result. fluidity and air content of minute particle cement and large particle cement are similar to OPC mortar, and a setting phenomenon of minute particle cement is faster than any others. n specific character manifesting strength, the primary stage`s compressive strength(16.7MPa) of the first day of minute particle cement is similar to the compressive strength(18.3MPa) of the third day of OPC mortar, and the primary stage`s compressive strength of the first day of the mix of OPC and minute particle cement mortar manifest 11.9MPa. There for, minute particle cement can be alternate instead of high strength cement which is being distributed. However, to apply smoothly according to economical efficiency and request of a site, it is to use the mix of OPC and minute particle cement suitable to ensure a high strength property.
석회석의 분말도 및 치환률 변화가 석회석 혼합시멘트 모르타르의 압축강도 및 탄소성적 평가에 미치는 영향
최재원,차완호,한민철 대한건축학회 2023 대한건축학회논문집 Vol.39 No.1
This study aims to evaluate the compressive strength of mortar and the carbon performance index of limestone composite cement to offer acouple of ways to reduce carbon emission in the cement industry. For this purpose, limestone cement made from two types of limestonepowders with different fineness was tested under the same W/B and mortar flow conditions. As a result, under the same W/B condition, themortar flow increased as the replacing rate of limestone increased, but the compressive strength decreased at all ages. On the other hand,under the same flow conditions, the compressive strength during days 1 to 3 decreased with the increase in limestone replacing rate; it wasconfirmed that the compressive strength of the mortar incorporating limestone for 28 days exhibited an almost same strength level with thatof OPC mortar. To evaluate the carbon performance index of limestone cement more accurately, it is suggested that compressive strength andcarbon performance should be considered at realistic conditions considering workability such as flow and slump, rather than at the same W/Band constant binder amount conditions. 본 연구에서는 시멘트의 제조과정에서 발생하는 탄소를 저감하는 기술의 하나로, 석회석 분말을 혼합재로 활용한 석회석 혼합시멘트 기술의 모르타르 압축강도 및 탄소성적을 평가하였다. 이를 위해 분말도가 다른 2종의 석회석 분말을 혼합한 석회석 시멘트를 동일한 W/B 조건과, 동일한 모르타르 flow 조건에서 각각 시험하고, 탄소성적을 비교하였다. 시험 결과, W/B가 동일한 조건에서는 석회석의 치환률이 증가할수록 flow는 증가하지만 모든 재령에서 압축강도가 감소하였다. 반면, flow가 동일한 조건에서는 1~3일 압축강도는 석회석 치환률 증가와 함께 감소하였지만, 28일 압축강도는 OPC와 동등한 수준을 발현할 수 있음을 확인하였다. 석회석 시멘트의 탄소성적을 평가하기 위해서는 본 연구와 같이 동일한 W/B, 단위 결합재량 조건이 아닌, 플로, 슬럼프 등 작업성을 고려한 현실적 배합에서 압축강도와 탄소성적을 동시에 고려해야 할 것으로 판단된다.