http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이선호,주성호,이해영,Lee, Sun-Ho,Joo, Sung-Ho,Lee, Hai-Young 한국전자파학회 2007 한국전자파학회논문지 Vol.18 No.2
In this paper, a new marchand balun using broadside-coupled coplanar waveguide(CPW) on flexible printed circuit (FPC) is proposed. The proposed balun is designed based on the coupled line theory. The fabricated balun shows compact size and improved performance compared to the conventional microstrip line marchand balun. Measured amplitude and phase imbalance between the two balanced output ports are within 0.2 dB and $1^{\circ}$ respectively in a wide frequency range($1.63{\sim}3.44$ GHz). The proposed balun is expected to be used between various antennas and RF front-ends as a functional interconnection. 본 논문에서는 기능성 연결부에 대한 응용으로, 연성 인쇄 회로의 조건에서 광역 결합 CPW 구조를 이용한 광대역 Marchand 발룬을 제작 측정하였다. 제안된 발룬은 결합 선로 이론을 바탕으로 설계, 기존의 마이크로스트립 라인 구조의 발룬과 비교하여 작은 크기로 향상된 특성을 나타냈다. 측정 결과 72 %의 넓은 대역폭을 갖고, 가용 주파수 내($1.63{\sim}3.44$ GHz)에서 삽입 손실의 차이와 위상 차이는 각각 0.2 dB, $1^{\circ}$ 이내로 나타났다. 따라서 제안된 발룬은 안테나와 RF 전단부의 연결부로 사용되어 전체적인 성능 향상에 기여할 것으로 기대된다.
GBN/SSN 억제를 위한 이종 셀 EBG 구조를 갖는 전원면
김동엽,주성호,이해영,Kim, Dong-Yeop,Joo, Sung-Ho,Lee, Hai-Young 한국전자파학회 2007 한국전자파학회논문지 Vol.18 No.2
본 논문에서는 넓은 영역에서 GBN/SSN 억제 특성을 보이는 이종 셀 EBG 구조를 이용한 새로운 전원면 구조를 제안하였다. 제안된 구조는 -30 dB 이하의 삽입 손실로 정의되는 저지 대역이 GBN의 에너지가 집중적으로 분포하는 수 백 MHz에서 시작하며 약 7.9 GHz의 넓은 대역폭을 갖는다. 본 구조의 특징은 인덕턴스를 강화하는 나선형 연결 선로와 분산적 LC 회로의 주기를 줄이는 이종 셀을 추가한 것이다. 그 결과 -30 dB 저지 대역의 저주파에서의 차단 주파수가 낮아짐은 물론 대역폭이 넓어진 특성을 보였다. 또한, 전원면과 접지면 사이의 구조적 공진 모드가 현격히 억제되었으며 평행판 도파관에 비해 낮은 EMI 특성을 보였다. In this paper, a novel power/ground plane using the hybrid-cell electromagnetic band-gap(EBG) structure is proposed for the wide-band suppression of the ground bound noise(GBN) or simultaneous switching noise(SSN). The -30 dB stopband of the proposed structure starts from a few hundred MHz where the GBN/SSN energy is dominant. The distinctive features of this new structure are the thin spiral strip line and hybrid-cells. They realize the enhanced inductance and the shorter period of the EBG lattice. As a result, the lower cut-off frequency and bandwidth of the -30 dB stopband becomes lower and wider, respectively. In addition, the proposed structure has smaller number of resonance modes between power/ground planes and performs a low EMI behavior compared with the reference board.
초고속 디지털 회로의 GBN 억제를 위한 육각형 EBG 구조의 전원면 설계
김선화,주성호,김동엽,이해영,Kim, Seon-Hwa,Joo, Sung-Ho,Kim, Dong-Yeop,Lee, Hai-Young 한국전자파학회 2007 한국전자파학회논문지 Vol.18 No.2
본 논문에서는 초고속 디지털 PCB 회로에서 발생하는 GBN(Ground Bounce Noise)을 억제하기 위한 새로운 EBG(Electromagnetic Bandgap) 구조의 전원면을 제안하였다. 제안된 구조는 육각형 모양의 단위 셀과 각 셀을 연결하는 선로로 구성되어 있다. 육각형 모양의 단위 셀은 등방성을 띄어 인접 셀의 각 포트 사이의 전달 특성을 동일하게 한다. 제안된 구조는 실제 제작, 측정되었고 330 MHz부터 5.6 GHz까지 넓은 주파수 대역에서 -30 dB 이하로 GBN을 억제하는 특성을 나타낸다. Electromagnetic Interference(EMI) 방사 측정 시에도 일반 전원면/접지면에 비해 낮은 EMI 특성을 나타낸다. 본 논문에서 제안한 육각형 EBG 구조의 전원면은 실제 EBG 전원면의 적용에 효율적으로 작용하여 초고속 디지털 회로의 EMI 문제를 해결하는 데 기여할 것으로 기대된다. In this paper, a novel hexagonal-shaped electromagnetic bandgap(EBG) power plane for the suppression of the ground bounce noise(GBN) in high-speed circuits is proposed. The proposed structure consists of hexagonal-shaped unit cells and detoured bridges connecting the unit cells. The hexagonal-shaped unit cells could omni-directionally suppress the GBN in digital circuits. The fabricated power plane's omni-directional -30 dB suppression bandwidth is from 330 MHz to 5.6 GHz. Then the proposed structure suppresses electromagnetic interference(EMI) caused by the GBN within the stopband. As a result, the proposed structure is expected to be conducive solving EMI problem in high-speed circuits.
황산코발트용액(溶液)으로부터 초임계(超臨界CO<sub>2</sub>에 의한 코발트 추출거동(抽出擧動)
신선명,주성호,손정수,강진구,Shin, Shun-Myung,Joo, Sung-Ho,Sohn, Jeong-Soo,Kang, Jin-Gu 한국자원리싸이클링학회 2011 資源 리싸이클링 Vol.20 No.6
초임계 <sub>2</sub>추출은 기존의 금속추출/용매추출 공정을 대체할 수 있는 새로운 공정으로써의 큰 가능성을 가지고 있는 기술이다. 초임계 <sub>2</sub>를 이용하여 황산코발트용액으로부터 코발트의 추출에 대한 연구를 수행하였다. 코발트의 추출을 위해 bis (2,4,4-trimethylpentyl) phosphinic acid 및 diethylamine을 초임계 <sub>2</sub>와 함께 추출제로 사용하였으며 <sub>2</sub>의 추출거동을 관찰하였다. 초임계 <sub>2</sub>추출은 $60^{\circ}C$, 200 bar의 조건에서 실시하였고 실험은 초임계 <sub>2</sub>추출제 착염화과정과 금속추출과정으로 구성된 공정을 이용하여 진행하였다. 실험결과 코발트의 추출률은 추출제 투입량에 따라 16-99%까지 증가하였다. Supercritical $CO_2$($scCO_2$) extraction has a great possibility to be a new process to recover metal and to replace the existing leaching/solvent extraction processes. The cobalt extraction was carried out using $scCO_2$ from cobalt sulphate solution. The bis (2,4,4-trimethylpentyl) phosphinic acid and diethylamine ligands were used to extract cobalt ion in $scCO_2$. The recommended method consists of $scCO_2$/extractants complexation process and metal extraction process at 60, 200bar. Experimental results showed that the extraction efficiency of Co was increased by 16-99% with increasing the ligand amount.
특허(特許)와 논문(論文)으로 본 폐전지 재활용(再活用) 기술(技術) 동향(動向)
신선명,주성호,김수경,조영주,조봉규,Shin, Shun-Myung,Joo, Sung-Ho,Kim, Soo-Kyung,Cho, Young-Ju,Cho, Bong-Gyoo 한국자원리싸이클링학회 2012 資源 리싸이클링 Vol.21 No.4
There are several kinds of batteries such as zinc-air battery, lithium battery, Manganese dry battery, silver oxide battery, sodium-sulphur battery, lead acid battery, metal hydride secondary battery, nickel-cadmium battery, lithium ion battery, alkaline battery, etc. These days it has been widely studied for the recycling technologies of the used battery from view points of economy and efficiency. In this paper, patents and published papers on the recycling technologies of the used battery were analyzed. The range of search was limited in the open patents of USA (US), European Union (EU), Japan (JP), Korea (KR) and SCI journal articles from 1972 to 2011. Patents and journal articles were collected using key-words searching and filtered by filtering criteria. The trends of the patents and journal articles were analyzed by the years, countries, companies, and technologies. 전지는 공기아연리튬망간산화은나트륨-유황납축니켈-수소 이차니켈-카드뮴리튬이온알칼라인 전지 등의 여러 종류가 있다. 경제적, 효율적 관점에서 폐전지의 재활용 기술은 폭넓게 연구되어 왔다. 본 연구에서는 폐전지의 재활용 기술에 대한 특허와 논문을 분석하였다. 분석범위는 1972년~2011년까지의 미국, EU, 일본, 한국의 등록/개된 특허와 SCI 논문으로 제한하였다. 특허와 논문은 키워드를 사용하여 수집하였고, 기술의 정의에 의해 필터링하였다. 특허와 논문의 동향은 연도, 국가, 기업, 기술에 따라 분석하여 나타내었다.
국내산 함바나듐 티탄자철광으로부터 CaO 배소를 통한 바나듐 침출거동
신동주,주성호,이동석,전호석,신선명,Shin, Dong Ju,Joo, Sung-Ho,Lee, Dongseok,Jeon, Ho-Seok,Shin, Shun Myung 한국자원리싸이클링학회 2021 資源 리싸이클링 Vol.30 No.4
In this study, the leaching behavior of vanadium (V) was investigated through CaO roasting and sulfuric acid leaching from domestic V-bearing titanomagnetite (VTM). Changes in the phase according to the amount of CaO added and roasting temperature were analyzed. Regardless of the roasting conditions, perovskite (CaTiO<sub>3</sub>) was preferred to form. When the CaO content was increased, the calcium ferrite (CaFeO<sub>x</sub>) phase was formed; otherwise, ferrite (Fe<sub>2</sub>O<sub>3</sub>) was preferred. After CaO was roasted, leaching was performed for 6 h with 1M sulfuric acid at 50℃ and a 10% solid-liquid ratio. Results of leaching revealed that when the roasted product was sintered, V was not sufficiently oxidized, and the leaching efficiency decreased. In addition, when the roasting temperature was low, the leaching efficiency of V decreased due to the influence of unreacted excess CaO. To lower the leaching efficiency of iron and titanium in VTM concentrates, suppressing the formation of CaTiO<sub>3</sub> and CaFeO<sub>x</sub> was necessary by minimizing the amount of CaO added. Consequently, a leaching efficiency of 86% V, 4.3% Fe, and 6.5% Ti was obtained when the roasted product of 1150℃ and 10 wt% CaO was leached.
저품위 동광으로부터 습식제련공정에 의한 구리의 분리 공정 연구
신동주,주성호,이동석,전호석,신선명,Shin, Dong Ju,Joo, Sung-Ho,Lee, Dongseok,Jeon, Ho-Seok,Shin, Shun Myung 한국자원리싸이클링학회 2021 資源 리싸이클링 Vol.30 No.5
In this study, we attempted to separate and recover Cu from low-grade copper ore by a hydrometallurgical process. The leaching sample obtained after crushing and sieving by 0.355 mm of low-grade copper ore contained 1.5% Cu, 4.7% Fe, 1.0% Mn, and 0.3% Zn. The Cu in the oxide ore was very well leached into sulfuric acid and 97% Cu leaching efficiency was achieved at 80℃ and 3 M sulfuric acid (H<sub>2</sub>SO<sub>4</sub>). From the leaching solution, Cu was separated by solvent extraction from Fe, Mn, and Zn using LIX984N. The separation tendency between Cu and other metals was confirmed through the distribution ratio and separation factor. By plotting the McCabe-Thiele Diagram, the optimum condition for recovering Cu is 5 vol.% LIX984N, 2-stage counter-current solvent extraction, and an O/A ratio of 0.5. Using this method, 99% of the Cu was extracted and a CuSO<sub>4</sub> solution was finally obtained that contained 1.6 g/L Cu after the stripping process using 2 M H<sub>2</sub>SO<sub>4</sub>.