http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
조승일(Seung-Il Cho),배성호(Seong-Ho Bae),이광희(Kwang-Hee Lee),김근오(Keun-O Kim),홍순양(Soon-Yang Hong),김성권(Seong-Kweon Kim) 한국지능시스템학회 2008 한국지능시스템학회 학술발표 논문집 Vol.18 No.2
본 논문은 친환경 자동차인 하이브리드 자동차에서 BMS(Battery Management System)의 핵심소자인 CVM(Cell Voltage Monitor)을 이루는 Level Shifter 설계에 대한 내용을 다룬다. 반도체 소자에서 DC 신호의 레벨 다운 및 레벨 업에는 대용량의 Capacitor가 필요한데, 이를 반도체내부에서 구현하기에는 그 Size의 문제로 불가능하다. 따라서 본 논문에서는 대용량의 Capacitor를 사용하지 않고, 아날로그 신호처리에 의한 레벨 업 및 레벨 다운이 가능한 DC Level Shifter를 소개한다. 사용공정 Magna O.6um 40V공정을 사용하였고, Cadence Analog Artist를 이용하여 시뮬레이선 결과를 나타내었으며, 그 활용은 CVM 구현에 유용함을 나타내었다.
Wireless PAN기반의 근거리 해상통신용 OFDM 송수신회로에 관한 연구
조승일(Seung-Il Cho),차재상(Jae-Sang Cha),박계각(Gye-Kack Park),양충모(Chung-Mo Yang),김성권(Seong-Kweon Kim) 한국지능시스템학회 2009 한국지능시스템학회논문지 Vol.19 No.1
유비쿼터스 네트워크의 실현을 위한 4세대 통신방식의 유력한 후보로 부상하는 OFDM (Orthogonal Frequency Division Multiplexing) 통신방식이 육상에서 주목받고 있으며, 고속 데이터 전송을 위한 Wireless LAN의 표준기술로 확정되어 있다. 해상통신의 경우에서도 OFDM 통신방식은 VHF 대역을 이용한 데이터 전송방식으로 제안되고 있으며, ITU (International Telecommunication Union)는 해상통신에서 32-point FFT (Fast Fourier Transform)를 사용하도록 권고하고 있다. 해상 통신에서는 해양사고 및 조난 시에도 통신이 이루어져야 하는 한계상황을 고려하면, OFDM 통신시스템의 중요 디바이스인 FFT는 저전력으로 동작되어야 한다. 따라서 본 논문에서는 OFDM 방식의 중요 디바이스인 32-point FFT를 저전력으로 동작시키기 위해 radix-2와 radix-4를 이용하여 저전력 32-point FFT 알고리즘을 제안한다. 최적화된 설계로 32-point FFT를 저전력 동작이 가능하도록 설계하였으며, 제안한 알고리즘은 VHDL (VHSIC hardware description language)로 구현하고 FPGA (field-programmable gate array) Spartan3 board에 장착하여 Matlab의 이론값과 비교, 검증하였다. Orthogonal Frequency Division Multiplexing (OFDM) has been focused on as 4th generation communication method for realization of Ubiquitous Network in land mobile communications services, and has been a standard technology of Wireless Local Area Network (WLAN) for a High Date Rate communication. And in maritime data communication using high frequency (HF) band, 32-point FIT OFDM system is recommended by International Telecommunication Union (ITU). Maritime communication should be kept on connecting when maritime accident or the maritime disaster happen. Therefore, main device FFT should be operated with low power consumption. In this paper we propose a low power 32-point FFT algorithm using radix-2 and radix-4 for low power operation. The proposed algorithm was designed using VHSIC hardware description language (VHDL), and it was confirmed that the output value of Spartan-3 field-programmable gate array (FPGA) board corresponded to the output value calculated using Matlab. The proposed 32-point FFT algorithm will be useful as a leading technology in a HF maritime data communication
조승일 ( Seong-il Cho ),최명섭 ( Myung-sup Choi ),배문환 ( Moon-hwan Bae ),이문정 ( Moon-jung Lee ),우희숙 ( Hee-suck Woo ),박순채 ( Soon-chae Park ),조은윤 ( Eun-yoon Cho ) 대한임상검사과학회 2010 대한임상검사과학회지(KJCLS) Vol.42 No.3
To improve accuracy of the immunohistochemical testing and fluorescence in situ hybridization (FISH) study as well as a routine histology diagnosis in breast cancer, quality improvement for optimal tissue handling is mandatory. We evaluate fraction defective of 7107 blocks from 349 breast cancer patients, who underwent surgical treatment at Samsung Medical Center Seoul, Korea from January 1, 2009 to March 31, 2010. We decided pre-improvement period from January, 2009 to June, 2009. In the first quality improvement period (July, 2009 to September, 2009) we made improvements in protocol of gross examination. In the second quality improvement period (October, 2009 to December, 2009) we attempted more effective formalin fixation such as frequent exchange of formalin and use of separate fixation container for each case. In the third quality improvement period (January, 2010 to March, 2010) improvement of tissue processor was performed. We achieved a marked reduction of fraction defective (9-16%) through efforts to improve quality of formalin-fixed, paraffin-embedded blocks when compared to pre-improvement period.
Sub-threshold 영역의 MOSFET 동작을 이용한 OP-AMP 설계
조태일(Tae Il Cho),여성대(Sung Dae Yeo),조승일(Seung Il Cho),김성권(Seong Kweon Kim) 한국전자통신학회 2016 한국전자통신학회 논문지 Vol.11 No.7
본 논문에서는 IoT(Internet of Things) 시스템의 기본 구성이 되는 센서 네트워크에 사용될 수 있는 MOSFET(Metal Oxide Semiconductor Field Effect Transistor)의 Sub-threshold 동작을 이용하는 OP-AMP(Operational amplifier) 설계를 제안한다. MOSFET의 Sub-threshold 동작은 전원전압을 낮추는 효과로 회로 시스템을 초저전력으로 유도할 수 있는 특징이 있기 때문에 배터리를 사용하는 IoT의 센서 네트워크시스템의 초저전력화에 매우 유용한 회로설계 기술이라고 할 수 있다. 0.35 μm 공정을 이용한 시뮬레이션 결과, VDD를 0.6 V로 설계할 수 있었으며, OP-AMP 의 Open-loop Gain은 43 dB, 또한 설계한 OP-AMP의 소비전력은 1.3 μW가 계산되었다. 또한, Active Layout 면적은 64 μm x 105 μm이다. 제안한 OP-AMP는 IoT의 저전력 센서 네트워크에 다양한 응용이 가능할 것으로 기대된다. In this paper, we suggest the design of OP-AMP using MOSFET in the operation of sub-threshold condition as a basic unit of an IoT. The sub-threshold operation of MOSFET is useful for an ultra low power consumption of sensor network system in the IoT, because it cause the supply voltage to be reduced. From the simulation result using 0.35 um CMOS process, the supply voltage, VDD can be reduced with 0.6 V, open-loop gain of 43 dB and the power consumption was evaluated with about 1.3 μW and the active size for an integration was measured with 64 μm × 105 μm. It is expected that the proposed circuit is applied to the low power sensor network for IoT.
김근오(Keun-O Kim),조승일(Seung-Il Cho),이광희(Kwang-Hee Lee),조하나(Ha-na Cho),홍순양(Soon-Yang Hong),김성권(Seong-Kweon Kim) 한국지능시스템학회 2008 한국지능시스템학회 학술발표 논문집 Vol.18 No.2
기존의 배터리 관리시스템에서 셀전압 측정을 위하여 PhotoMOS relay를 사용하는데, 대용량 전지 팩은 다수의 PhotoMOS relay를 필요로 하며, 가격 또한 고가이기 때문에 전체적인 시스템의 가격 상승을 초래한다. 이러한 문제점을 해결하기 위하여 본 논문에서는 저항을 이용한 전압분배 회로를 통해 고전압(600V)의 battery module 전체 전압을 package 별로 측정하는 PVM(Package Voltage Monitor) 개념을 새롭게 도입한 것으로, 기존의 방식보다 동작속도 개선 및 저전력 동작, 원가절감의 효과가 있는 시스템 구성을 소개한다. PVM 방식을 이용한 배터리관리시스템은 하이브리드 자동차뿐만 아니라, DMB, E-Scooter E-Bike 동 배터리 팩이 사용되는 모든 시스템에 적용이 가능하며, 배터리 관리시스템의 개선에 기여할 것으로 기대된다.
이경량,김종운,여성대,조승일,김성권,Lee, Kyung-Ryang,Kim, Jong-Un,Yeo, Sung-Dae,Cho, Seung-Il,Kim, Seong-Kweon 한국전자통신학회 2015 한국전자통신학회 논문지 Vol.10 No.5
LED의 사용이 증가됨에 따라, LED 디스플레이의 저전력 설계에 대한 요구가 증가하고 있다. 본 논문에서는 디지털 신호로 제어하는 정전류원 회로에 단열회로 동작을 유도하는 전원소스 공급을 통하여, 저전력화가 가능한 LED 컨트롤러부를 설계하였다. 설계한 회로는 0.35um CMOS Process로 구현하였으며 회로의 선형 동작을 확인하였다. 시뮬레이션 결과 기존의 LED 컨트롤러부에 대비하여 약 82% 소비전력 절감효과를 확인하였다. 본 연구는 LED 디스플레이 동작의 발열 대책 및 저전력화에 유용할 것으로 기대된다. According to increase in the use of the LED, the demand for low power consumption LED display design of the controller block has increased. In this paper, the low power LED controller block was designed through the power source supply that leads adiabatic operation from constant current source circuit operated by digital signal control. The proposed circuit was implemented using a 0.35um CMOS process. and it demonstrated linear operation of the circuit. From the simulation result, the proposed circuit was evaluated with about 82% power consumption reduction effect in comparison with conventional LED controller block. This research is expected to be helpful for the low power operation and the solution for heat problem of LED display.
Daisy Chain Interface를 위한 DC Level Shifter 설계
여성대(Sung Dae Yeo),조태일(Tae Il Cho),조승일(Seung Il Cho),김성권(Seong Kweon Kim) 한국전자통신학회 2016 한국전자통신학회 논문지 Vol.11 No.5
본 논문은 Daisy Chain 구조의 CVM(:Cell Voltage Monitoring) 시스템에서, 다양한 DC Level을 갖는 Master IC와 Slave IC 사이에 명령 Data 신호의 전달을 가능하게 해주는 DC Level Shifter 설계를 소개한다. 설계한 회로는 래치 구조가 적용되어 고속 동작이 가능하고, 출력단의 Transmission Gate를 통하여 다양한 DC Level이 출력되도록 설계하였다. 시뮬레이션 및 측정 결과, 0V에서 30V까지의 DC Level 변화에 따른 제어 및 Data 신호의 전달을 확인하였다. Delay Time 오차는 약 170ns가 측정되었지만, 측정 Probe의 Capacitance 성분 및 측정 Board의 영향을 고려하면, 무시할 수 있을 정도의 오차로 간주된다. In this paper, a design of DC level shifter transmitting and receiving control and data signal which have various DC level through daisy chain interface between master IC and slave is introduced in the cell voltage monitoring (CVM). Circuit designed with a latch structure have a function to operate in high speed and for output of variable DC level through transmission gate. As a result of the simulation and the measurement, it was confirmed that control and data signal could be transferred according to the change of DC level from 0V to 30V. Delay time was measured about 170ns. but, it was considered as a negligible tolerance due to a parasitic capacitance of measuring probe and test board.
이광희(Kwang-Hee LEE),배성호(Seong-Ho Bae),김종선(Jong-Sun Kim),김보성(Bo-Sung Kim),홍순양(Soon-Yang Hong),조승일(Seung-Il Cho),김성권(Seong-Kweon Kim) 한국지능시스템학회 2008 한국지능시스템학회 학술발표 논문집 Vol.18 No.2
본 논문은 친환경 자동차인 하이브리드 자동차에서 BMS(Battery Monitoring System)의 핵심소자인 CMS(Cell Monitoring System)을 이루는 전압센서 회로 설계에 대한 내용을 다룬다. 하이브리드 자동차에 들어가는 배터리 관리시스템(Battery Management System, BMS)은 전지 셀의 전압, 온도를 측정하며, 전지의 상태를 추정하여 전지의 충방전에 관여하는 중요한 Device이다. 기존의 배터리 관리시스템에 적용되는 방식은 PhotoMOS relay를 사용하는데, 대용량 전지 팩은 다수의 PhotoMOS relay를 필요로 하며, 가격 또한 고가이기 때문에 전체적인 시스템의 가격 상승을 초래한다. 본 논문에서는 고가의 PhotoMOS relay를 사용하지 않고 셀배터리 전압을 측정할 수 있는 전압센서 회로를 소개한다. 사용공정 Magna 0.6um 40V공정을 사용하였고, Cadence Analog Artist를 이용하여 시뮬레이션 결과를 나타내었으며, CMS 구현에 유용함을 나타내었다.