http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정일문,이정우,장선우 한국자연보호학회 2014 한국자연보호학회지 Vol.8 No.2
This review focuses on the hydrological definition and functions of hyporheic zone which has a feature of interaction between surface water and groundwater in natural stream system. This work also investigated how to measure the amount of flow exchange around this zone. As hyporheic zone shows heterogeneous feature due to groundwater level, river bed thickness, and hydraulic conductivity, spatio-temporal variation of interactions between surface-groundwater hydrologic exchange is to be analyzed. The methods to quantify this flow exchange can be classified according to field scale and status, the proper method should be adopted. Especially, Krause et al. (2007), showed that the flow exchange plays an important role in water balance in watershed and can be quantified by using integrated watershed hydrologic modeling.
통합수문모형을 이용한 장성지역의 분포형 지하수 함양량 추정
정일문,박승혁,이정은,김민규 대한토목학회 2018 대한토목학회논문집 Vol.38 No.4
As groundwater recharge shows the heterogeneity in space and time due to land use and soil types, estimating daily recharge by integrated hydrologic analysis is needed. In this work, the SWAT-MODFLOW model was applied to compute daily basedgroundwater recharge in Jangseong region. The accuracy of the model was evaluated by comparing the observed and calculated valuesof the unsteady groundwater flow levels after calibrating the observed and calculated flow rates of the stream for a hydrological analysis. The estimated hydrologic components showed a strong correlation with each other and significant spatial variations regarding the groundwater recharge rate in accordance with the heterogeneous watershed characteristics such as subbasin slope, land use, and soil type. Overall, it was concluded that the coupled hydrologic models were capable of simulating the spatial variation with respect to the hydrologic component process in surface water and groundwater. The average recharge rate was estimated at approximately 20.8%. 지하수 함양은 기후조건, 토지이용, 수리지질학적 비균질성에 의해 시공간적인 변동성을 나타내므로 통합수문해석에 의한 지하수 함양량의 추정이 필요하다. 본 연구에서는 SWAT-MODFLOW 연계모형을 활용하여 장성지역의 물리적 기반의 일단위 지하수 함양량을 산정하였다. 수문분석은 하천에서의 관측유량과 계산유량의 검보정에 이어 부정류 지하수위의 계산값과 관측값의 비교를 통해 모형의 정확도를 평가하였다. 추정된 수문성분은 상호간에 서로 관련이 깊고, 유역내의 비균질한 인자들인 소유역 경사, 토지이용, 토양종류에 따라 지하수 함양량의 공간적 변동이 크게 나타났다. 통합수문모형은 지표수 및 지하수 수문성분 프로세스의 시공간적 변화를 잘 모의하고 있는 것으로 평가되었다. 추정된 함양량의 평균은 약 20.8%로 나타났다.
정일문,김남원,이정우,이정은,Chung, Il-Moon,Kim, Nam Won,Lee, Jeongwoo,Lee, Jeong Eun 대한토목학회 2014 대한토목학회논문집 Vol.34 No.6
지금까지 세계적으로 지하수 관리는 연간 지하수 함양량을 기반으로 한 안전채수량 정책에 의해 수행되어 왔다. 그러나 지하수 함양량은 시공간적으로 변동하므로 지속가능한 지하수자원을 평가하기 위해서는 동적 해석이 필요하다. 본 연구에서는 지표수-지하수 통합해석 모형인 SWAT-MODFLOW를 이용하여 경주지역의 지하수 함양량 공간분포를 산정하였다. 우리나라에서는 10년 빈도 갈수시 강수량에 함양계수를 곱하여 지역별 개발가능량을 산정하기에 본 연구에서는 기존 개발가능량을 평가하기 위해 빈도해석기법을 이용하였다. 소유역별 10년 빈도 갈수시의 지하수 함양량을 추정하는 보수적 방법을 제안하고 이를 기존 개발가능량과 비교하였다. 이같은 계산 절차를 통해 지하수 개발가능량을 산정하는 기존 절차의 한계를 합리적으로 제시할 수 있었다. By far, groundwater management has been conducted by 'safe yield' policy based on the estimation of annual average of groundwater recharge throughout the world. However, as groundwater recharge show spatiotemporal variation, dynamic analysis must be carried out to evaluate the sustainable groundwater resources. In this study, an integrated surface-groundwater model, SWAT-MODFLOW was used to compute the spatial distribution of groundwater recharge in Gyungju region. Frequency analysis is adopted to evaluate the existing values of potential amount of groundwater development which is made by the 10 year drought frequency rainfall multiplied by recharge coefficient. The conservative methods for estimating recharge rates of 10 year drought frequency in subbains are newly suggested and compared with the existing values of potential amount of groundwater development. This process will promote the limitations for existing precesses used for computing potential amount of groundwater development.
경계요소모형을 이용한 지하 저장공동의 지하수 유입량 분석
정일문,이정우,조원철 한국수자원학회 2005 한국수자원학회논문집 Vol.38 No.7
LPG등 고압가스를 지하에 저장하는 저장공동의 효과적인 관리를 위해서는 지하수위, 가스저장압, 수막공 주입압 등에 따른 공동주변의 유동장 해석, 공동내로의 지하수 유입량 해석을 실시해야 한다. 기존에는 공동의 정확한 형상을 반영하기 위해서 유한요소법이 보편적으로 사용되어 왔으나 한번 설정한 유한요소망으로부터 공동의 설계요소를 변경하는 작업은 수월하지 않아 설계전단계에서 공동 및 수막시설의 다양한 배치에 따른 모의를 수행하는데는 다소 무리가 있다. 이러한