http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
측면연마된 단일모드 광섬유와 폴리머 평면도파로 결합기를 이용한 고감도 온도센서
鄭雄圭,김응수,유윤식,강신원,金相佑,金光鐸 대한전자공학회 2002 電子工學會論文誌-SD (Semiconductor and devices) Vol.39 No.1
High-senstivity temperature sensor based on the wavelength selectivity of single mode fiber-to-planar waveguide coupler, was demonstrated. The resonant wavelength of the coupler was shifted with large rate of -3.43㎚/℃ owing to good thermo-optic effects of polymer planar waveguide. The device design technique to reduce the polarization dependent properties and increase the temperature sensitivity was presented. 단일모드 광섬유와 평면도파로 결합기의 파장선택성을 이용한 고감도 온도센서를 구현하였다. 폴리머 평면도파로의 높은 열광학 효과에 의하여 결합기의 공진파장이 -3.43㎚/℃ 정도로 매우 민감하게 이동함을 관찰할 수 있었다. 소자의 편광의존성을 줄이고 온도에 대한 감도를 증가시키기 위한 설계 기법을 제시하였다.
정웅규,김도영 한국공안행정학회 2022 한국공안행정학회보 Vol.31 No.3
본 연구는 최근 세계적으로 개발이 진행중인 4차 산업혁명의 인공지능 현주소를 살펴보고, 미국과 대한민국이 방위사업에 접목하고 있는 체계에 대해 살펴본다. 현재까지 확인되는 보안 취약 사례들을 살펴보고, 향후 개발과정에서 발생할 수 있는 보안 취약 요인들을 보완할 수 있는 방안을 제시하는 목적으로 연구를 진행하였다. 인공지능은 초지능성과 초연결성을 바탕으로 운용되기 때문에 일부분이 해킹 되었을 경우 시스템 전체에 피해를 줄 수 있으며, 구축된 데이터를 해커가 잘못된 정보로 변화시킬 경우 운용체제 전체가 무력화 될 수도 있다. 전쟁 목적으로 개발되고 운용되는 방위사업의 무기체계 에는 민간에서 활용하는 인공지능 기반의 장비보다 사회에 발생시키는 결과가 더욱 심각하게 초래할 수 있다. 이와 관련하여 보완이 필요한 취약분야를 탐색해보고 문헌과 전문가들의 의견을 바탕으로 해결방안을 모색해보고자 한다. 인공지능을 활용하는 현재와 미래에 도움이되는 자료로 활용되기를 기대한다.
열광학 폴리머 평면도파로의 소산장결합을 이용한 광섬유형 온도센서
김시홍,정웅규,김광택,송재원,강신원 한국센서학회 2000 센서학회지 Vol.9 No.1
Optical fiber temperature sensor, using resonance wavelength shifting of single mode fiber-to-planar waveguide coupler by heat, was fabricated. Thermo-optic polymers, have large change of refractive index due to heat, were used for planar waveguide. The device fabrication procedure including fiber polishing steps was illustrated and the device structure with independent polarization was demonstrated experimentally. The resonance wavelength difference of fabricated device was less than 2nm. The resonance wavelength shifting owing to temperature variation, from room temperature(24℃) to 90℃, was showed -0.54nm/℃, -3nm/℃
Optical Coherence Tomography for the Diagnosis and Evaluation of Human Otitis Media
조남현,이상흔,정웅규,장정훈,김지현 대한의학회 2015 Journal of Korean medical science Vol.30 No.3
We report the application of optical coherence tomography (OCT) to the diagnosis andevaluation of otitis media (OM). Whereas conventional diagnostic modalities for OM,including standard and pneumatic otoscopy, are limited to visualizing the surface of thetympanic membrane (TM), OCT effectively reveals the depth-resolved microstructure belowthe TM with very high spatial resolution, with the potential advantage of its use fordiagnosing different types of OM. We examined the use of 840-nm spectral domain-OCT(SD-OCT) clinically, using normal ears and ears with the adhesive and effusion types ofOM. Specific features were identified in two-dimensional OCT images of abnormal TMs,compared to images of healthy TMs. Analysis of the A-scan (axial depth scan) identifiedunique patterns of constituents within the effusions. The OCT images could not only beused to construct a database for the diagnosis and classification of OM but OCT might alsorepresent an upgrade over current otoscopy techniques.
단일모드 광섬유와 금속클래드 평면도파로 사이의 광 결합을 이용한 편광기 제작
김광택,송재원,정웅규,강신원,Kim, Gwang-Taek,Song, Jae-Won,Jeong, Ung-Gyu,Gang, Sin-Won 대한전자공학회 2000 電子工學會論文誌-SD (Semiconductor and devices) Vol.37 No.4
광섬유-평면도파로 결합기의 편광선택성을 이용한 새로운 구조의 광섬유형 편광기를 설계 및 제작하였다. 금속클래드-평면도파로의 높은 복굴절을 이용함으로서 동작 파장범위를 증가시킬 수 있었다. 평면도파로의 코어층으로 폴리머를, 클래딩으로 금(Au)을 각각 사용하였다. 실험결과는 평면도파로의 두께를 조절하여 TE편광 혹은 TM 편광이 만들어 질 수 있음을 보인다. 16㏈ 이상의 편광소멸비를 만족하는 파장범위는 130nm 이상으로 나타났고 삽입손실은 0.5㏈ 정도였다. Based on the polarization selectivity of fiber-to-planar waveguide coupler, a novel fiber optic polarizer has been designed and fabricated. The large structural birefringence of a metal-clad planar waveguide enables the polarizer to have wide operating wavelength range. The polymer and gold were used for the guiding layer and cladding layer of the planar waveguide, respectively. The experimental results showed that either TE or TM polarized lightwave could be created by adjusting the thickness of planar waveguide. Operating wavelegth range satisfying more than 16㏈ polarization extinction ratio was 130nm. The average insertion loss of fabricated devices was order of 0.5㏈.
High Speed SD-OCT System Using GPU Accelerated Mode for in vivo Human Eye Imaging
조남현,정운상,김수환,정웅규,오정환,김지현,강현욱 한국광학회 2013 Current Optics and Photonics Vol.17 No.1
We developed an SD-OCT (Spectral Domain-Optical Coherence Tomography) system which uses a GPU (Graphics Processing Unit) for processing. The image size from the SD-OCT system is 1024 × 512 and the speed is 110 frame/sec in real-time. K-domain linearization, FFT (Fast Fourier Transform), and log scaling were included in the GPU processing. The signal processing speed was about 62 ms using a CPU (Central Processing Unit) and 1.6 ms using a GPU, which is 39 times faster. We performed an in-vivo retinal scan, and reconstructed a 3D visualization based on C-scan images. As a result, there were minimal motion artifacts and we confirmed that tomograms of blood vessels, the optic nerve, and the optic disk are clearly identified. According to the results of this study, this SD-OCT can be applied to real-time 3D display technology, particularly auxiliary instruments for eye operations in ophthalmology.