http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Copy-milling 시스템을 이용한 Cealy In-Ceram 도재관
정승미,강동완 朝鮮大學校 口腔生物學硏究所 1999 口腔生物學硏究 Vol.23 No.1
Based on the high biocompatibility and a remarkable long-term reach, In-Ceram^(R) crowns(Vita Zahnfabrik, Bad Sa¨ckingen, Germany) are being used more frequently as on of excellent restoration. Because of the favorable mechanical values, the In-Ceram^(R) technique is interesting for the use in practics. All-ceramic restoration improve the mechanical shaping of an industrially prefabricated ceramic material. The Celay^(R) system (Mikrona AG, Spreitenbach, Switzerland) is based on this principle. This technology allows the production of accurately fitting substructures for crowns and anterior bridges by a manually guided copy-milling process. The mechanism uses no electronic assistance, it is only a mechanical device based on micropalpation of an intermediar unit fabricated directly by patients or indirectly in the laboratory. Copy-milled, Celay^(R) In-Ceram crowns were produced in an clinical setting. The advantages of this new technique are shortening of processing time and reduction in defects during processing through the use of an processing time and reduction in defects during processing through the use of an industrially prefabricated material. And this system can create all surfaces of inlay, veneer, onlay, crown and anterior bridge restorations. This paper reports a case of copy-milled Celay^(R) In-Ceram crowns and reviews the practical procedure and main advantages of Celay^(R) system.
정승미,이동훈,김용진 한국폐기물자원순환학회 2018 한국폐기물자원순환학회 학술대회 Vol.2018 No.05
최근 우리나라 서・남해안에 대량 유입되고 있는 괭생이모자반은 매년 그 양이 증가하고 있으며, 항해 및 양식시설 등에 피해를 주고 있다. 또한 막대한 비용 및 인력을 동원하여 수거한 후에도 그 처리에 어려움을 겪고있다. 우리나라 해안에 유입되는 양이 매년 증가하고 있어 괭생이모자반에 대한 적절한 처리방안 대책이 시급한 실정이다. 해조류는 바이오에너지 회수를 위한 바이오매스로 주목을 받아, 에너지 전환 공정에 대한 연구가 활발히 진행되고 있다. 괭생이모자반은 해조류 중 갈조류에 속하며 바이오매스로서의 잠재성이 높을 것으로 판단된다. 그러나 바다에서 수거/수확된 해조류에는 해수 속 염분이 일부 묻어 있을 것으로 사료되며, 이 단계에서 해조류 관리와 후속 공정과의 연구는 현재 미미하다. 이에 본 연구에서는 바다에서 수거된 괭생이모자반을 대상으로 수거직후 관리(세척여부)에 따라 바이오에너지 전환 공정 중 당 가수분해에 미치는 영향에 대하여 검토하였다. 세척시료와 미세척시료를 대상으로 강열감량 후 회분의 전기전도도 값을 측정한 결과, 미세척시료가 2.28 mS/cm로 세척시료보다 1.64배 높았으며, 이때 회분의 약 73%가 염분으로 나타났다. 세척과정을 반복적으로 실시하여 배출된 세척수의 전기전도도를 측정한 결과, 3회 세척 후 세척수 전기전도도는 1회 세척 후 결과 값의 88%가 감소하여, 해조류 표면에 묻은 염분은 반복되는 세척과정에서 상당부분 제거됨을 확인하였다. 세척여부는 당 가수분해 공정에도 영향을 미쳤으며, 특히 효소를 이용한 생물학적 가수분해 공정에 저해효과가 큰 것으로 나타났다.
Pichia Stipitis를 이용한 섬유질계 음식물류 폐기물의 바이오에탄올 발효 특성
정승미,김용진 한국폐기물자원순환학회 2013 한국폐기물자원순환학회지 Vol.30 No.5
To improve the conversion rate of the saccharification liquid of food wastes, containing a mixture of pentose and hexose, to bioethanol, this study aimed to investigate the fermentation characteristics by P. stipitis which is used in the fermentation of xylose as well as glucose as a substrate. Saccharification liquid of cellulosic food wastes such as Chinese cabbage, cabbage, and Chinese chive contained hexose, mainly glucose and fructose, and pentose, mainly xylose and trace disaccharide. The pentose in reducing sugar occupied 32%, meaning that the conversion rate to ethanol could be increased by the fermentation of such a pentose. From the result of ethanol fermentation, although the rate of fermentation by P. stipitis was slower than by S. coreanus, it was verified the consumption of pentose as well as hexose in the process of the forced air injection, consequently, it was confirmed the increase of ethanol yield.
디지털 스캔을 이용하여 제작된 임플란트 수술가이드의 정확도
정승미,방정환,황찬현,강세하,최병호,방일흠,전형태,안성훈,Jeong, Seung-Mi,Fang, Jeong-Whan,Hwang, Chan-Hyeon,Kang, Se-Ha,Choi, Byung-Ho,Fang, Yiqin,Jeon, Hyongtae,An, Sunghun 대한치과보철학회 2015 대한치과보철학회지 Vol.53 No.2
목적: 인상재와 석고모형을 사용하지 않고 디지털 영상 만을 사용하여 제작된 수술가이드를 이용한 치과 임플란트 수술의 정확도를 평가하고자 하였다. 재료 및 방법: 상하악 부분 무치악 모델 6개 세트를 본 연구에 사용하였다. 모델을 환자 구강구조로 간주하고 부분 무치악 모델을 Trios 구강스캐너로 디지털 인상을 채득하였다. 수술가이드의 정확도 평가를 위해 제작된 Reference plate를 모델의 교합면에 고정한 상태로 CBCT를 촬영하였다. CBCT에서 얻은 영상과 디지털 인상에서 얻은 영상을 정합하고 정합한 영상에서 임플란트 식립위치를 진단하고 수술가이드를 디자인하였다. 제작된 수술가이드를 이용하여 부분 무치악 모델에서 임플란트를 식립하였다. 시술 후, 시술 전과 동일한 방법으로 CBCT를 촬영하여 시술 전 컴퓨터 소프트웨어에서 측정한 수치와 시술 후 CBCT촬영하여 소프트웨어상에서 측정한 시술 후 수치 사이 차이점을 비교하였다. 결과: 평균거리오차가 임플란트 상단 X축에서 0.27 mm, Y축에서 0.29 mm 였으며, 임플란트 하단(Apex)부위에서는 X축에서 0.11 mm, Y축에서 0.14 mm 평균각도오차가 X축에서 $0.26^{\circ}$, Y축에서 $0.26^{\circ}$ 였다. 평균수직오차는 +0.44 mm로 시술 전 계획한 높이보다 평균 0.44 mm 더 위로 임플란트가 식립되었다. 결론: 본 연구의 결과는 인상재와 석고모형을 사용하지 않고 디지털 영상 만을 사용하여 제작된 수술가이드를 사용하여 임플란트를 시술할 경우 계획한 임플란트 식립 위치와 방향으로 높은 정확도를 가지고 임플란트를 식립할 수 있음을 보여 주었다. Purpose: The objective of this study was to evaluate the accuracy of a stereolithographic surgical guide that was made with information from intraoral digital impressions and cone beam CT (CBCT). Materials and methods: Six sets of resin maxilla and mandible models with missing teeth were used in this study. Intraoral digital impressions were made. The virtual models provided by these intraoral digital impressions and by the CBCT scan images of the resin models were used to create a surgical guide. Implant surgery was performed on the resin models using the surgical guide. After implant placement, the models were subjected to another CBCT scan to compare the planned and actual implant positions. Deviations in position, depth and axis between the planned and actual positions were measured for each implant. Results: The mean deviation of the insertion point and angulation were 0.28 mm and $0.26^{\circ}$, apex point were 0.11 mm and 0.14 mm respectively. The implants were situated at a mean of 0.44 mm coronal to the planned vertical position. Conclusion: This study demonstrates that stereolithographic surgical guides created without the use of impressions and stone models show promising accuracy in implant placement.
체계적인 임플랜트 치료 계획의 수립과 성공적인 임상을 위한 컨셉트
정승미,김세훈,유지현,Jeong Seung-Mi,Kim Se-Hoon,Yoo Je-Hyeon 대한치과보철학회 2006 대한치과보철학회지 Vol.44 No.2
Statement of problem: It is important to have a correct presurgical treatment plan before any implant surgery. It must contain substantial information about the patient concerned. However, the standard classification only notifies the dentist about various structural, pathological and physiological dimensions Due to diverse structure of the jaw bone, current standard classification does not tell spatial dimensions of the available bone for implant insertion sites. Purpose of study: The purpose of this study is to report the establishment of the systematic implant treatment plan and its clinical treatment using $Implan^(R)$ program which is based on ASCIi-classification that is available for future diagnosis and scale of treatment and for systematic implant insertion. Results: By assisting the systemic measurement of the available alveolus dimension during implant surgery, it was easy to set initial implant treatment plan. Conclusion: Using $Implan^(R)$ program which is based on ASCIi-classification system that allows the establishment of systemic implant treatment plan and successful clinical performance, it was possible to establish the founding or initial implant treatment plan , the acquisition of information, and the systematization of documentation.