http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Cone형 복합재 Lattice 구조물의 설계 및 공정 연구
도영대(Youngdae Doh),정상기(Sangki Chung),이상우(Sangwoo Lee),장홍빈(Hongbeen Chang) 한국추진공학회 2011 한국추진공학회 학술대회논문집 Vol.2011 No.11
이 논문은 필라멘트 와인딩 공법으로 제작된 cone형 복합재 lattice 구조물에 대한 연구이다. cone형 복합재 lattice 구조물은 helical rib과 hoop rib 구조로 이루어져 있다. 이 구조는 탄소 섬유를 에폭시수지에 함침 시켜 섬유의 끊어짐이 없이 연속적으로 실리콘 고무 금형의 홈 안에 필라멘트 와인딩 하여 제작한 것이다. 본 연구에서 cone형 복합재 lattice 구조물에 대한 설계 개념과 제작방법에 대해 기술하였다. This paper is concerned with anisogrid composite lattice structures whose load bearing shell is formed by systems of geodesic unidirectional composite ribs made by automatic wet winding process. Lattice structures are usually made in the form of conical shell and consist of systems of helical and hoop ribs fabricated by continuous filament winding from carbon and epoxy composites. Design variables of the structure which are the angle of helical ribs and ribs spacings are determined by cone geometry and geodesic line. and Fabrication methods for the conical composite lattice structure are presented.
3-Roll Coater를 이용한 핫멜트 에폭시-탄소섬유 토우프레그 제조방법에 관한 연구
박용민(Yongmin Park),정상기(Sangki Chung),윤영주(Youngju Yun),정연중(Yeanjung Jeong),배성우(Sungwoo Bea),허몽영(Mongyoung Huh),이학성(Haksung Lee),최동현(Donghyun Choi) 한국추진공학회 2015 한국추진공학회 학술대회논문집 Vol.2015 No.11
경량이면서 고강도인 고성능 탄소섬유 복합재 연소관 제조에 적용 가능한 핫멜트 에폭시 수지 적용탄소섬유 토우프레그 제조공정 연구를 수행하였다. 3-Roll Coater를 이용한 핫멜트 에폭시 수지함침 공정 연구를 수행하여 탄소섬유의 입사각에 따른 토우프레그의 스프레딩 및 함침특성을 연구하였으며, 이에 따른 토우프레그의 성능을 함께 평가하여 보았다. This research has been studied the manufacturing method of hot melt epoxy resin applied carbon-fiber towpreg for light-weight, high strength composite motor case. We checked the characteristics of spreading and impregnation properties of the carbon fiber in accordance with the incident angles of the carbon fiber and evaluated the performance of towpreg as well.
필라멘트와인딩에 의해 제조된 Lattice 구조물의 설계 및 제작 연구
도영대(Youngdae Doh),정상기(Sangki Chung),이상우(Sangwoo Lee),손조화(Johwa Son) 한국추진공학회 2010 한국추진공학회 학술대회논문집 Vol.2010 No.5
이 논문은 필라멘트 와인딩 공법으로 제작된 복합재 lattice 구조물에 대한 연구이다. 복합재 lattice 구조물은 helical rib과 hoop rib 구조로 이루어져 있다. 이 구조는 탄소 섬유를 에폭시에 함침 시켜 섬유의 끊어짐이 없이 연속적으로 실리콘 고무 금형의 홈 안에 필라멘트 와인딩하여 제작한 것이다. 본 연구에서는 lattice 구조물의 helical rib의 각도, 두께, 폭, 간격등을 안전율에 대하여 최적화 하는 이론을 제시하였다. 그리고 lattice 구조물의 제작방법을 기술하고 해석 및 시험결과를 기술하였다. This paper is concerned with Anisogrid composite lattice structures whose load bearing shell is formed by systems of geodesic unidirectional composite ribs made by automatic wet winding process. Lattice structures are usually made in the form of cylindrical shell and consist of systems of helical and hoop ribs fabricated by continuous filament winding from carbon and epoxy composites. Design variables of the structure which are the angle of helical ribs, ribs spacings, and cross sectional areas are determined by the method of minimization of satety factors whick is described in the paper. And, fabrication methods and actual experimental results are presented.
고성능 CFRP 압력용기 적용을 위한 고인성 에폭시 Matrix에 관한 연구
박용민(Yongmin Park),정상기(Sangki Chung),정연중(Yeanjung Jeong),박노현(Nohyun Park),김소영(Soyoung Kim),허몽영(Mongyoung Huh),이학성(Haksung Lee) 한국추진공학회 2015 한국추진공학회 학술대회논문집 Vol.2015 No.11
고성능 복합재 압력용기 제조에 적용 가능한 토우프레그용 Matrix에 관한 연구를 수행하였다. 복합재 압력용기 Matrix의 요구 물성인 우수한 접착성, 높은 신율, 우수한 피로물성에 부합하는 고인성 수지 개발을 위해 열가소성 Nylon계 수지의 에폭시 수지 강인화제 (Toughener) 적용 가능성을 확인해 보았다. In this Study, in order to improve the performance of composite pressure vessel, we evaluated the applicability of thermoplastic nylon resins as epoxy toughener for carbon fiber towpreg.
박용민(Yongmin Park),황태경(Tae Kyung Hwang),정상기(Sangki Chung),박노현(Nohyun Park),정연중(Yeanjung Jeong),허몽영(Mongyoung Huh) 한국추진공학회 2016 한국추진공학회 학술대회논문집 Vol.2016 No.5
본 논문에서는 필라멘트 와인딩 공정을 통해 제조되는 로켓 모터케이스, 수소연료전지 자동차용 연료탱크, 산업용 고성능 압력용기 등 성능과 신뢰성을 동시에 필요로 하는 부품 제조용 소재로 주목받고 있는 탄소섬유 토우프리프레그의 국내외 최신 연구동향에 대하여 살펴보았다. Carbon fiber towpreg is the one of spotlight materials for high-performance rocket motor cases, fuel tanks for hydrogen vehicles and other high-quality commercial pressure vessels. In this article, we reviewed the recent research trends in carbon fiber towpreg.
초음파 위상 반전에 의한 FRP/고무 접착 계면의 미접착 결함 검출 연구
김동륜(Dongryun Kim),임수용(Sooyong Lim),정상기(Sangki Chung) 한국추진공학회 2009 한국추진공학회지 Vol.13 No.2
The object of this study is to develop new examination technique for detecting debond in adhesive interface of different kinds of materials. Ultrasonic signal was modeled by theoretically analyzing ultrasonic propagation phenomenon of the adhesive interface and debonding interface. The test method using the phase reversal of the debonding interface applied to the FRP/Rubber test block. Aluminum/Rubber test block with the flat bottom hole was manufactured to evaluate quantitatively the minimum detection ability of defects. The pulse echo reflection method and the phase reversal method were mutually compared and it was estimated that the phase reversal method could detect the debond on the basis of the theoretically predicted ultrasonic signal and ultrasonic test data.
박용민(Yongmin Park),황태경(Tae Kyung Hwang ),정상기(Sangki Chung),박노현(Nohyun Park),장준열(Jun Yeol Jang),나창운(Changwoon Nah) 한국추진공학회 2017 한국추진공학회지 Vol.21 No.2
Tow Prepreg is the intermediate material for filament winding process that has been “pre-impregnated fiber tow” with resin system. As “dry filament winding” process emerges as a reliable alternative to conventional filament winding (called “wet filament winding”) process, interest in tow prepreg as a material for dry filament winding is rising as well. In this article, we have reviewed the recent research trends in carbon fiber tow prepreg for high-performance rocket motor cases, fuel tanks for hydrogen vehicles and other high-quality commercial pressure vessels.
기계기술 분야 국가연구개발사업 투자현황 진단 및 시사점
김진호(Jinho Kim),최영(Young Choi),정상기(Sangki Chung),노경준(Kyungjoon Noh),이재흔(Jaehun Lee) 대한기계학회 2006 대한기계학회 춘추학술대회 Vol.2006 No.11
The government has invested national resources in the machinery area since 1980 to promote the R&D of Machinery. In addition, the government reorganized the science and technology administration system recently enacting new laws related with science and technology to promote the efficient policy of science and technology. At this point, we need to understand the status of national R&D expenditures for the efficient priority setting and budget coordination of national R&D resources in the area of machinery. This paper performs the analysis of the government R&D expenditures by the concerned variables such as program objectives, sector of performance, character of work and technology fields and suggests the policy implications.
김동륜(Dongryun Kim),임수용(Sooyong Lim),정상기(Sangki Chung),이경훈(Kyunghoon Lee) 한국추진공학회 2011 한국추진공학회 학술대회논문집 Vol.2011 No.11
초음파 결함 분석 프로그램은 초음파 반사법을 기반으로 초음파 신호 처리 기법을 적용하여 개발되었고, FRP 층간분리 및 FRP/내열고무 미접착 결함을 정량적으로 측정할 수 있었다. 복합재 연소관에서 검출된 결함은 절단하여 전산화 단층촬영 및 영상 현미경으로 분석하였고, 결함 분석 프로그램의 결과와 일치하였다. 본 논문은 복합재 연소관의 초음파시험 데이터를 C-Scan 영상으로 변환하여 결함을 분석할 수 있는 프로그램 개발 과정을 기술하였다. A defect analysis program of the composite motor case was developed to apply the ultrasonic signal processing method on basis of the ultrasonic pulse-echo method and the defects of FRP delamination and FRP/Rubber disbond in the composite motor case could be quantitatively measured. The defects detected in the composite motor case were in agreement with the results measured with the computed tomography and video microscope. This paper was described about the development process of the defect analysis program to convert the ultrasonic test data into the C-Scan image.