http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
가스 인젝션을 이용한 가변속 왕복동 압축기가 적용된 열펌프의 냉방성능에 관한 연구
장진혁(Jinhyuk Jang),이대희(Daehui Lee),이진호(Jinho Lee) 대한기계학회 2012 대한기계학회 춘추학술대회 Vol.2012 No.5
고온의 외기온도에서 운전되는 열펌프의 냉방 성능향상과 신뢰성 확보는 매우 중요하다. 가스 인젝션 사이클은 냉방능력과 신뢰성 향상을 위해 효과적인 기술이다. 본 연구의 목적은 왕복동 압축기를 사용하는 열펌프에 가스 인젝션 사이클을 적용하여 신뢰성 확보하고, 냉방 성능을 향상 시키는데 있다 가변속 왕복동 압축기와 바이패스 라인에 EEV를 설치하여 운전속도와 바이패스 라인의 EEV 개도율 변화를 통해 운전 특성과 냉방 성능변화를 알아보았다. 이를 통해 압축기 출구 압력과 온도가 각각 최대 36.5%와 52.1%로 하강하였으며, 냉방 COP는 최대 10%가 상승하였다. Vapor injection cycle is used to enhance cooling performance and reliability of heat pump operate under high temperature cooling. The purpose of this study is improving cooling performance and ensuring reliability of heat pump. Gas injection cycle is applied to heat pump with variable speed reciprocating compressor. Operating characteristics and cooling performance of heat pump were discussed on varying compressor frequency and open rate of EEV in bypass line. As a result, compressor exit pressure and temperature were decreased maximum 36.5% and 52.1% respectively and cooling COP is increased maximum 10%.
열펌프의 동시 난방 : 급탕 운전에서 용량분배에 관한 연구
장진혁(Jinhyuk Jang),이대희(Daehui Lee),이진호(Jinho Lee) 대한설비공학회 2011 대한설비공학회 학술발표대회논문집 Vol.2011 No.7
In simultaneously heating and hot water operating mode, the experiment of this was carried out with respect to different entering water temperature and water flow rate variation to match the capacity for required actual load between heating and hot water on geothermal heat pump, tested on laboratory scale at water flow rate range for hot water from 10% to 40% and it for heating from -30% to 0% based on water flow rate through condenser. Entering water temperature also was changed from 25℃to 40℃to know influence of load variation for each heating and hot water. The test result represented that the influence of heating is larger than it of hot water with respect to load variation due to a portion of latent heat and the unbalance capacity is clearly shown. Consequently, the water flow rate for hot water can be controlled properly the capacity distribution between heating and hot water according to each load variation
최형철(Hyengcheul Choi),이형진(Hyungjin Lee),박범기(Bumki Park),장진혁(Jinhyuk Jang),김형동(Hyeongdong Kim) 한국전자파학회 2012 한국전자파학회논문지 Vol.23 No.2
본 논문은 안테나 구조 없이 리액티브 소자 만을 이용하여 단말기 그라운드를 방사체로 활용하는 방법을 소개한다. 안테나의 특성은 블루투스 대역에서 동일 그라운드 면적(40×20 ㎟)을 가지는 미앤더 IFA와 비교하여 분석하였다. 시뮬레이션 및 측정을 통해 캐패시터 소자 만을 이용한 안테나가 가장 높은 방사 효율을 나타내는 것으로 판명되었다. 이는 안테나의 인덕턴스가 높을수록 그라운드의 방사 저항이 감소하고, 캐패시터의 손실 저항이 인덕터 또는 IFA보다 낮기 때문이다. 높은 방사 효율에도 불구하고 제안하는 안테나의 면적(5×2.5 ㎟)은 IFA의 면적(12×2.5 ㎟)의 반 이하이다. This paper introduces the method to utilize a terminal ground as a radiator only using reactive components without an antenna structure. Characteristics of the proposed antenna is compared with that of the meander IFA on the same ground plane(40×20 ㎟) for the bluetooth band. From simulation and measurement data, it is found that the proposed antenna using only capacitors provides the highest radiation efficiency. This is because of that the higher inductance reduces radiation resistance of a ground and the capacitor has a lower loss resistance comparing to that of the IFA or the inductor. In spite of the high radiation efficiency, the area (5×2.5 ㎟) of the proposed antenna is less than half of the area (12×2.5 ㎟) of the IFA.