http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
임규호 한국기상학회 2019 대기 Vol.29 No.5
To find any effects of precipitation climate on the forecast verification methods, we processed the hourly records of precipitation over South Korea. We examined their relationship between the climate and the methods of verification. Precipitation is an intermittent process in South Korea, generally less than an hour or so. Percentile ratio of precipitation period against the entire period of the records is only 14% in the hourly amounts of precipitation. The value of the forecast verification indices heavily depends on the climate of rainfall. The direct comparison of the index values might force us to have a mistaken appraisal on the level of the forecast capability of a weather forecast center. The size of the samples for verification is not crucial as long as it is large enough to satisfy statistical stability. Our conclusion is still temporal rather than conclusive. We may need the amount of precipitation per minute for the confirmation of the present results.
내장형 펌핑 커패시터를 사용한 TFT-LCD 구동 IC용 전하펌프 설계
임규호,송성영,박정훈,이용진,이천효,이태영,조규삼,박무훈,하판봉,김영희,Lim, Gyu-Ho,Song, Sung-Young,Park, Jeong-Hun,Li, Long-Zhen,Lee, Cheon-Hyo,Lee, Tae-Yeong,Cho, Gyu-Sam,Park, Mu-Hun,Ha, Pan-Bong,Kim, Young-Hee 한국정보통신학회 2007 한국정보통신학회논문지 Vol.11 No.10
본 논문에서는 TFT-LCD 구동 IC 모듈의 소형화 측면에서 유리한 DC-DC 변환기 회로인 펌핑 커패시터 내장형 크로스-커플드 전하펌프(Cross-Coupled Charge Pump with Internal Pumping Capacitor) 회로가 새롭게 제안되었다. VGH 및 VGL 전하펌프 각각의 입력단과 전하 펌핑 노드를 연결하는 NMOS 및 PMOS 다이오드를 두어, 초기 동작 시 전하 펌핑 노드를 서로 같은 값으로 프리차지하여 대칭 적으로 전하 펌핑을 하도록 하였다. 그리고 첫 번째 전하 펌프의 구조를 다르게 설계하여 펌핑된 전하가 입력단으로 역류되는 현상을 방지하였다. 또한, 펌핑 클럭 구동 드라이버의 위치를 펌핑 커패시터 바로 앞에 두어 기생 저항으로 인한 펌핑 클럭 라인의 전압강하를 방지하여 구동능력을 향상 시켰다. 마지막으로 내장형 펌핑 커패시터를 Stack-MIM 커패시터를 사용하여 기존의 크로스-커플드 전하펌프 보다 레이아웃 면적을 최소화하였다. 제안된 TFT-LCD 구동 IC 용 전하펌프 회로를 $0.13{\mu}m$ Triple-Well DDI 공정을 사용하여 설계하고, 테스트 칩을 제작하여 검증하였다. A cross-coupled charge pump with internal pumping capacitor, witch is advantages from a point of minimizing TFT-LCD driver IC module, is newly proposed in this paper. By using a NMOS and a PMOS diode connected to boosting node from VIN node, the pumping node is precharged to the same value each pumping node at start pumping operation. Since the lust-stage charge pump is designed differently from the other stage pumps, a back current of pumped charge from charge pumping node to input stage is prevented. As a pumping clock driver is located the font side of pumping capacitor, the driving capacity is improved by reducing a voltage drop of the pumping clock line from parasitic resistor. Finally, a layout area is decreased more compared with conventional cross-coupled charge pump by using a stack-MIM capacitors. A proposed charge pump for TFT-LCD driver IC is designed with $0.13{\mu}m$ triple-well DDI process, fabricated, and tested.
TFT -LCD 구동 IC용 커패시터 내장형 DC-DC 변환기 설계
임규호,강형근,이재형,손기성,조기석,백승면,성관영,이용진,박무훈,하판봉,김영희,Lim Gyu-Ho,Kang Hyung-Geun,Lee Jae-Hyung,Sohn Ki-Sung,Cho Ki-Seok,Baek Seung-Myun,Sung Kwan-Young,Li Long-Zhen,Park Mu-Hun,Ha Pan-Bong,Kim Young-Hee 한국정보통신학회 2006 한국정보통신학회논문지 Vol.10 No.7
A non-overlap boosted-clock charge pump(NBCCP) with internal pumping capacitor, an advantageous circuit from a minimizing point of TFT-LCD driver IC module, is proposed in this paper. By using the non-overlap boosted-clock swinging in 2VDC voltage, the number of pumping stages is reduced to half and a back current of pumping charge from charge pumping node to input stage is also prevented compared with conventional cross-coupled charge pump with internal pumping capacitor. As a result, pumping current of the proposed NBCCP circuit is increased more than conventional cross-coupled charge pump, and a layout area is decreased. A proposed DC-DC converter for TFT-LCD driver IC is designed with $0.18{\mu}m$ triple-well CMOS process and a test chip is in the marking. 본 논문에서는 TFT-LCD 구동 IC 모듈의 소형화측면에서 유리한 DC-DC 변환기 회로인 펌핑 커패시터 내장형 비중첩 부스트-클락 전하펌프 (Non-overlap Boosted-Clock Charge Pump: NBCCP) 회로가 제안되었다 .2VDC 전압으로 스윙하는 비중첩 부스트-클럭의 사용으로 기존의 펌핑 커패시터 내장형 크로스-커플드 전하펌프에 비해 펌핑 단의 수를 반으로 줄일 수 있었고, 전하 펌핑 노드의 펌핑된 전하가 입력 단으로 역류되는 현상을 방지하였다 . 그 결과 제안된 펌핑 커패시터 내장형 비중첩 부스트-클럭 전하펌프 회로는 기존의 펌핑 커패시터 내장형 크로스-커플드 전하펌프에 비해 펌핑 전류가 증가하였고, 레이아웃 면적은 감소되었다. 제안된 TFT-LCD 구동 IC용 DC-DC 변환기 회로를 $0.18{\mu}m$ Triple-Well CMOS 공정을 사용하여 설계하고, 테스트 칩을 제작 중에 있다.