국내 평가 가이드 라인 제시를 위한 전동식 부항기의 특성 조사에 관한 연구

이승호,김은정,신경훈,남동우,강중원,이승덕,이혜정,이재동,김갑성,Yi, Seung-Ho,Kim, Eun-Jung,Shin, Kyung-Hoon,Nam, Dong-Woo,Kang, Jung-Won,Lee, Seung-Deok,Lee, Hye-Jung,Lee, Jae-Dong,Kim, Kap-Sung 대한침구의학회 2010 대한침구의학회지 Vol.27 No.1

Objectives : The mechanical properties of Korean electric cupping systems are studied via experimental measurements. The study aimed at establishing the fundamentals of industrialization and systemization of oriental medicine device industry, as well as improving the quality of life for many Koreans. Methods : We reviewed the studies on traditional cupping as well as modern one to fine necessary factors for electric cupping systems. To characterize the mechanical properties of Korean electric cupping systems, we measured the pressure characteristics of commercially available electric cupping system by using an automatic pressure acquisition system and a standard cup. The pumping capability was checked at 40 seconds, and the stability of the suction cup was checked at 600 seconds. We also acquired the noise level of each system in clinical setting. To check the portability of each system, we also measured its physical dimensions. We scrutinized system manuals provided by the system manufacturers. Results : It took less than 5 second to reach the pressure if the connection between the air hose and the vacuum valve of the cupping system was secure. Pressure diminished to no more than 10% for 600s for all systems. Noise levels were 55~70 dB. Increase in pressure was too fast to control for a designated vacuum level except for one product. Conclusions : The Pumping ability of the systems is impressive and reliable. Pressure retention ability of each cup is quite reliable and reproducible. Therefore, their mechanical performances were worthy of recommendation. Some of them had noise level higher than 60 dB and they were bothersome. It was also suggested that the control for low to middle pressure needed to be accomplished by the cupping system.

제 2 발표장 : 유리섬유 부직포 강화 폴리에스터 복합재료의 물성과 충격특성에 관한 연구 ( Ⅱ ) - 부직포 복합재료의 구조와 물성 -

이승호,강태진 ( Sung Ho Lee,Tae Jin Kang ) 한국복합재료학회 1997 한국복합재료학회 학술발표대회 논문집 Vol.- No.2

Kano 모델을 이용한 설비시공회사의 CRM이 고객만족도에 미치는 영향

이승호,장석주,Lee, Seung Ho,Chang, Seog Ju 한국품질경영학회 2017 품질경영학회지 Vol.45 No.3

Purpose: This study investigates the effect of CRM activities of Korean equipment construction companies on the quality satisfaction perceived by consumers as an analysis method using Kano model. Methods: It use the Kano model to classify the quality characteristics of the CRM activities of equipment construction companies, focusing on consumer perception, and analyze the effect on the level of quality satisfaction perceived by consumers. Results: The results showed that most of quality attributes of CRM activities in the equipment companies were categorized as 'one-dimensional' quality. Conclusion: The CRM activities in equipment construction compaies is verified to be essential component of successful strategy to improve customer's satisfaction.

치주임상에서의 정주진정법의 적용

이승호,이준영,박정주,Lee, Seoung-Ho,Lee, Jun-Young,Park, Jung-Ju 대한치과마취과학회 2004 Journal of Dental Anesthesia and Pain Medicine Vol.4 No.1

Chronic periodontitis is one of the most common disease in clinical dentistry, which needs various surgical interventions to treat the moderate to severe destruction of supporting periodontium. Most patients have fear and anxiety to these surgical procedures and some dentists also have problems to deal with these patients. Applying the conscious sedation technique in outpatient units, periodontists have become to manage their patients successfully without any fear and anxiety and increased the level of patients' satisfaction. Particularly, periodontal treatments require relative long chair-time and patients are usually reluctant to the periodontal instruments used in the oral cavity. This study is focused on the sedation procedure with intravenous midazolam infusioon performed in Department of Periodontology, Ewha Womans University Hospital. The whole procedure of intravenous midazolam sedation is briefly reviewed from patient selection to patient discharge.

Antihypertensive activity of KR-31081, an orally active nonpeptide AT1 receptor antagonist

이승호,Lee, Sung-Hou The Korea Academia-Industrial cooperation Society 2009 한국산학기술학회논문지 Vol.10 No.11

The pharmacological profile of KR-31081, a newly synthesized AT1 receptor antagonist, was evaluated in pithed rats, conscious renal hypertensive rats (RHRs) and conscious furosemide-treated beagle dogs. In pithed rats, KR-31081 (i.v.) induced a non-parallel right shift in the dose-pressor response curve to angiotensin II (ID50: 0.05 mg/kg) with a dose-dependent reduction in the maximum responses; this antagonistic effect was about 40 times more potent than losartan (ID50: 1.74 mg/kg) which showed competitive antagonism. KR-31081 did not alter the responses induced by other agonists such as norepinephrine and vasopressin. In RHRs, orally given KR-31081 produced a dose-dependent and long-lasting (>24 h) antihypertensive effect with a higher potency to losartan (ED20: 0.30 and 3.36 mg/kg, respectively). In furosemide-treated dogs, orally given KR-31081 produced a dose-dependent and long-lasting (>8h) antihypertensive effect with a rapid onset of action (time to Emax: 1-1.5 h) and 20-fold greater potency than losartan (ED20: 0.41 and 8.13 mg/kg, respectively). These results suggest that KR-31081 is a potent, orally active AT1 receptor antagonist useful for the research and diagnostic tools as an added exploratory potential. 비펩타이드성 안지오텐신 수용체 길항제로 새롭게 개발된 KR-31081에 대한 생체 내 활성을 세가지 동물모델에서 검증하였다. 척수장애 동물모델에서 KR-31081은 로사탄보다 40배 이상의 경쟁적인 혈압강하 효과를 나타내었으며, 신성고혈압쥐 모델에서 KR-31081은 로사탄보다 10배 가량의 지속형 효과를 나타내었다. 또한 개실험에서 구강 투여한 KR-31081은 로사탄보다 20배 이상의 지속적인 혈압강하 효과를 나타내었다. 실험에 사용된 동물 모델 시스템에서 다른 혈관조절물질들과 상호작용을 하지 않는 것으로 나타난 KR-31081은 향후 고혈압 및 혈관질환에 대한 연구 및 진단에 활용될 수 있을 것이라고 판단된다.

참조 수문관측소 구성 조건에 따른 LSTM 모형 홍수위예측 정확도 검토 사례 연구

이승호,김수영,정재원,윤광석,Lee, Seungho,Kim, Sooyoung,Jung, Jaewon,Yoon, Kwang Seok 한국수자원학회 2023 한국수자원학회논문집 Vol.56 No.12

최근 전세계적인 기후변화의 영향으로 강우가 집중되고 강우강도가 강해짐에 따라 홍수피해의 규모를 증가시키고 있다. 과거에 관측되지 않았던 규모의 비가 내리기도 하고, 기록되지 않았던 장기간의 장마가 발생하기도 한다. 이러한 피해들은 아세안 국가에도 집중되고 있으며, 태풍 및 집중호우로 인해 침수의 빈번한 발생과 함께 많은 사람들이 영향을 받고 있다. 특히, 인도네시아 찌따룸강 상류 유역에 위치한 반둥 지역은 분지 형태의 지형학적 특성을 가지고 있어서 홍수에 매우 취약한 실정이다. 이에 공적개발원조(ODA)를 통해 2017년에 찌따룸강 상류(Upper Citarum River) 유역에 대하여 홍수예경보시스템을 구축되었고, 현재 운영중에 있다. 그럼에도 불구하고, 찌따룸강 상류 (Upper Citarum River) 지역은 홍수발생시 인명 및 재산피해의 위험에 여전히 노출되어 있어 신속하고 정확한 홍수예경보의 실시를 통해 피해를 경감시키는 노력이 지속적으로 필요한 실정이다. 따라서 본 연구에서는 찌따룸강 상류의 Dayeuh Kolot 지점을 목표관측소로 하고, 강우관측소 4개소와 수위관측소 1개소의 10분 단위 수문자료를 수집하여 인공지능 기반의 하천홍수위예측모형을 개발하였다. 6개 관측소의 2017년 1월부터 2021년 1월까지의 10분 단위 수문관측자료를 활용하여 선행예보시간 0.5, 1, 2, 3, 4, 5, 6시간에 대해서 학습, 검증, 시험을 수행하였으며 인공지능알고리즘으로는 LSTM을 적용하였다. 연구결과 모든 선행예보시간에 대해 모형적합도 및 오차에서 좋은 결과를 나타냈으며, 학습자료 구축조건에 따른 예측정확도를 검토한 결과 참조관측소가 적은 경우에도 모든 관측소를 활용하는 경우와 유사하게 예측정확도를 확보하는 것으로 나타나 효율적인 인공지능 기반 모형 구축에 활용될 수 있을 것으로 기대된다. Due to recent global climate change, the scale of flood damage is increasing as rainfall is concentrated and its intensity increases. Rain on a scale that has not been observed in the past may fall, and long-term rainy seasons that have not been recorded may occur. These damages are also concentrated in ASEAN countries, and many people in ASEAN countries are affected, along with frequent occurrences of flooding due to typhoons and torrential rains. In particular, the Bandung region which is located in the Upper Chitarum River basin in Indonesia has topographical characteristics in the form of a basin, making it very vulnerable to flooding. Accordingly, through the Official Development Assistance (ODA), a flood forecasting and warning system was established for the Upper Citarium River basin in 2017 and is currently in operation. Nevertheless, the Upper Citarium River basin is still exposed to the risk of human and property damage in the event of a flood, so efforts to reduce damage through fast and accurate flood forecasting are continuously needed. Therefore, in this study an artificial intelligence-based river flood water level forecasting model for Dayeu Kolot as a target station was developed by using 10-minute hydrological data from 4 rainfall stations and 1 water level station. Using 10-minute hydrological observation data from 6 stations from January 2017 to January 2021, learning, verification, and testing were performed for lead time such as 0.5, 1, 2, 3, 4, 5 and 6 hour and LSTM was applied as an artificial intelligence algorithm. As a result of the study, good results were shown in model fit and error for all lead times, and as a result of reviewing the prediction accuracy according to the learning dataset conditions, it is expected to be used to build an efficient artificial intelligence-based model as it secures prediction accuracy similar to that of using all observation stations even when there are few reference stations.

MRM 도입필요성 및 육군 W/G 적용 타당성 분석

이승호,Lee, Seung-Ho 한국국방경영분석학회 2005 한국국방경영분석학회지 Vol.31 No.1

Korea DM&S(Defence Modeling & Simulation) development plan includes construction of a distributed simulation model which enables us to construct, operate, integrate and connect war game simulations. US DoD and IEEE set the HLA/RTI as the standard of distributed simulation model. HLA/RTI models each simulator as a Federate and group of them as a Federation. Simulation with the model shows interoperability and finally executes a war game simulation. Because of different resolutions and features, it is not satisfied 'interoperability' and 'reusability' of simulation perfectly MRM (Multi Resolution Modeling) has been introduced, and many developed countries including the United States have studied the technology to simulate the model with different resolutions. This thesis proposes the need for introduction of MRM and analyzes both technical and operational validity when we apply MRM model to army war game simulations. For these purposes, we 1) find MRM main issues with the study about MRM basic concepts and case studies of MRM's applications, 2) present the need of MRM and its relation with DM&S development plan, and 3) analyze its technical and operational validity when we apply MRM to an example, CHANG-JO21 and JEON-TOO21.

A New Sampling and SEC Method for Analysis of Underivatized Cellulose

이승호,박희영,Lee, Seung Ho,Park, Hee Young Korean Chemical Society 1998 대한화학회지 Vol.42 No.2

A new sampling and size exclusion chromatography (SEC) method for the analysis of underivatized cellulose are established. In this method, cellulose materials are first dissolved in N-methylmorpholine N-oxide (NMMO) and diluted by adding dimethyl sulfoxide (DMSO) to make the sample solutions of about 0.1% in 50/50 NMMO/DMSO (w/w). Sample solutions are analyzed using a glucose-treated divinylbenzene (DVB) SEC column and DMSO containing 0.05M LiBr and 2.5 blank as the eluant. The flow rate was constant at 1 mL/min and the whole SEC system including the column was heated at $80^{\circ}C$ to reduce the viscosity of DMSO. Addition of 0.05 M LiBr eliminated SEC baseline drifting, and addition of 2.5 blank seems to reduce the interaction between the sample and the column packing. SEC molecular weights were determined using a calibration curve constructed from a series of narrow pullulan standards, and they were used to measure the degree of degradation during two different pulp-to-sponge processings. 셀룰로스시료를 치환체로 만들지 않고 분자량 및 분자량분포를 결정하기 위한 새로운 시료처리 및 크기배제크로마토그래피방법을 확립하였다. 먼저 셀룰로스시료를 N-methylmorpholine N-oxide (NMMO)에 녹인 후 dimethyl sulfoxide (DMSO)에 희석함으로써 50/50(w) NMMO/DMSO에 녹은 약 0.1%의 시료용액을 만들었다. 컬럼으로는 글루코오스를 입힌 polydivinylbenzene 겔을 채운 크기배제크로마토그래피용 컬럼을 이용하였으며 용리액으로는 0.05M의 LiBr와 2.5%의 바탕용액을 포함하는 DMSO를 이용하였다.유속은 1 mL/min로 일정하게 유지하였고, DMSO의 점도를 낮추기 위해 컬럼을 포함하는 전체 시스템을 80$^{\circ}C$ 로 유지하였다. 0.05M의 LiBr를 가함으로써 SEC바탕선의 표류를 방지할 수 있었고 2.5%의 바탕용액을 가함으로써 시료와 컬럼충진물질 사이의 상호작용을 감소시키는 효과를 얻었다. 좁은 분포를 가지는 pullulan표준물질로부터 얻은 컬럼보정곡선을 이용하여 두 개의 I 펄프시료와 두 개의 셀룰로스 스펀지 시료의 평균분자량을 결정함으로써 펄프로부터 스펀지를 만드는 서로 다른 두 가지 공정에서의 셀룰로스 분자들의 분해정도를 결정, 비교할 수 있었다.

균열 특성 개선을 위한 2단 쇼트피닝 가공

이승호,심동석,Lee, Seoung-Ho,Shim, Dong-Suk 한국기계가공학회 2003 한국기계가공학회지 Vol.2 No.4

In this study, to investigate the effects of 2-step shot peening at the surface of spring steel, crack growth tests are conducted on spring steel and shot peened specimens. And then the residual stresses and fractographs are examined. The crack growth equation that can describe the whole crack growth behavior is used to evaluate the experiment results. The results show that fatigue crack glows slowly in the shot peened specimen than in the unpeened. And in the case of the 2-step shot peened specimen the initial stress intensity factor range and the fracture toughness is higher than the unpeened specimen due to the compressive residual stress. Fractographs show that the compressive residual stress of the surface suppress the fatigue crack opening and consequently slow crack growth rates.

도로사업의 종합 평가시스템 구축 방안

이승호,Lee, Seung-Ho 대한교통학회 2007 교통 기술과 정책 Vol.4 No.2