http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
불규칙 표면 시편을 이용한 Flexible 위상배열초음파기술 적용 연구
이승표,문용식,정남두,Lee, Seung-Pyo,Moon, Yong-Sig,Jung, Nam-Du 한국비파괴검사학회 2015 한국비파괴검사학회지 Vol.15 No.1
원자력발전소에는 탄소강과 스테인리스강 용접을 위해 alloy600 용접재를 적용한 이종금속용접부가 다수 존재하며, 전 세계적으로 이종금속용접부에서 결함 발생 보고가 지속되고 있다. 주기적인 건전성 평가를 위해 이종금속용접부 초음파검사 일반절차서 (KPD-UT-10)를 적용하여 검사를 수행하고 있으며, 검사절차서에서는 탐촉자와 검사체 표면 사이의 간격을 최대 1/32"(0.8mm) 이내로 제한하고 있다. 국내의 일부 이종금속용접부는 테이퍼진 형상과 불규칙한 표면 형상을 가지고 있어, 가변형 위상배열초음파기술을 적용하여 검사 신뢰성을 높이고자 본 연구를 수행하였다. 연구 결과, 검사체 표면이 불규칙한 시편 내부의 인공결함에 대한 검출이 양호하였고, 이를 통해, 가변형 위상배열초음파기술의 현장 적용 가능성을 확인하였다. Nuclear power plant contain many dissimilar metal welds that connect carbon steel components with stainless steel pipes using alloy600 welding materials. Primary water stress corrosion cracks at dissimilar metal welds have been continuously reported around the world. In periodic integrity evaluations, dissimilar metal welds are examined using a generic ultrasonic testing procedure, KPD-UT-10. In this procedure, the gap between the probe and examination surface is limited to 1/32 inch (0.8mm). It is not easy to test some dissimilar metal welds in Korean plants applying ordinary technology because of their tapered shapes and irregular surface conditions. This paper introduces a method for applying a flexible phased array technology to improve the reliability of ultrasonic testing results for various shapes and surface conditions. The artificial flaws in specimens with irregular surfaces were completely detected using the flexible phased array ultrasonic technology. Therefore, it can be said that the technology is applicable to field examination.
원전 주증기배관 웰더렛 용접부 위상배열초음파검사 적용연구
이승표,김진회,Lee, Seung-Pyo,Kim, Jin-Hoi 한국압력기기공학회 2011 한국압력기기공학회 논문집 Vol.7 No.3
KSNPs(Korea Standard Nuclear Power Plant) have been applied the break exclusion criteria to the high energy lines passing through containment penetration area to ensure that piping failures would not cause the loss of containment isolation function, and to reduce the resulting dynamic effects. Systems with the criteria are the Main Steam system, Feed Water system, Steam Generator Blowdown system, and Chemical & Volume Control system. In accordance with FSAR(Final Safety Analysis Report), a 100% volumetric examination by augmented in-service inspection of all pipe welds appled the break exclusion criteria is required for the break exclusion application piping. However, it is difficult to fully satisfy the requirements of inspection because 12", 8" and 6" weldolet weldments of Main Steam pipe line have complex structural shapes. To resolve the difficulty on the application of conventional UT(Ultrasonic Testing) technique, realistic mock-ups and UT calibration blocks were made. Simulations of conventional UT were performed utilizing CIVA, a commercial NDE(Nondestructive Examination) simulation software. Phased array UT experiments were performed through mock-up including artificial notch type flaws. A phased array UT technique is finally developed to improve the reliability of ultrasonic test at main steam line pipe to 12", 8" and 6" branch connection weld.
이승표,강기원,장세명,이장호,Lee, Seung-Pyo,Kang, Ki-Weon,Chang, Se-Myong,Lee, Jang-Ho 한국생산제조학회 2010 한국생산제조학회지 Vol.26 No.2
In recent years, wind energy has been the world's fastest growing source of energy. This paper describes the structural design and analysis of composite blade for 2 kW-level HAWT (horizontal axis wind turbine). The aerodynamic design and force, which are required to design and analyze a composite blade structurally, are calculated through BEMT(blade element momentum theory) implemented in public code PROPID. To obtain the equivalent material properties of filament wound composite blades, the rule-of-mixture is applied using the basic material properties of fiber and matrix, respectively. Lay-up sequence, ply thickness and ply angle are designed to satisfy the loading conditions. Structural analysis by using commercial software ABAQUS is performed to compute the displacement and strength ratio of filament wound composite blades.
이승표(Lee, Seung-Pyo),하성규(Ha, Sung-Kyu),고병갑(Koh, Byung-Kab) 한국산학기술학회 2008 한국산학기술학회논문지 Vol.9 No.5
본 연구에서는 LNG 저장탱크에 대하여 내진해석을 수행하였다. 해석 모델은 관통 파이프만을 고려한 경우와 관통 파이프, 내부 벽체, 가이드를 고려한 경우에 대하여 해석을 수행하였다. 내진 해석법으로 등가정적 해석법고 응답 스펙트럼 해석법을 두 가지 해석 모델에 대하여 각각 적용하였다. 변형량과 응력을 계산하고, 그 결과를 비교하였다. 해석 결과, 응답 스펙트럼 해석법이 등가정적 해석법에 비하여 LNG 저장탱크를 보다 잘 모사하는방법임을 알 수 있었다. In this paper, seismic analysis of LNG storage tank is performed. The analysis models are both piper and pipe, wall and guide of LNG tank. And equivalent static analysis and response spectrum analysis are applied to these two models, respectively. From the analysis, deflections and equivalent stresses are compared. Results show that response spectrum analysis is more accurate than equivalent static analysis for LNG storage tank.
이승표(Lee, Seung-Pyo),고병갑(Koh, Byung-Kab),하성규(Ha, Sung-Kyu) 한국산학기술학회 2008 한국산학기술학회논문지 Vol.9 No.6
유도가열 방식의 전기보온압력밥솥은 밥솥 전체를 가열하기 때문에 밥맛이 좋고, 빠르게 밥을 지을 수 있는 장점이 있어서 많이 사용되고 있다. 특별히 전기보온압력밥솥의 오븐은 내부에 압력이 작용하기 때문에 안전성 검토가 반드시 필요하다. 본 연구에서는 변형률을 평가하기 위하여 스트레인 게이지를 이용한 실험을 수행하였고, 그 결과를 유한 요소법을 이용한 구조 해석 결과와 비교하였다. 또한, 영구 변형량을 평가하기 위하여 수부하 실험을 수행 하였고, 그 결과를 구조 해석 결과와 비교하였다. 이들 실험과 해석 결과를 통하여 오븐의 안전도를 평가하는 방법을 제시하였다. Because of good taste and quick cooking, the induction heating type pressure rice cooker is widely used. Since pressure is applied to oven structure, it should be necessary to check the safety evaluation. In this paper, strain gauge experiment is performed in order to evaluate the oven's strain and its result is compared with that of structural analysis. And water test is performed to evaluate the oven’s permanent deformation. The result is also compared with that of structural analysis. By using these experiments and analyses the safety evaluation method of the oven is suggested.