e-무역상사의 발전과제에 관한 연구

이봉수,Lee, Bong-Soo 한국무역상무학회 2003 貿易商務硏究 Vol.20 No.-

The trial business of e-trade service providers for supporting small enterprises to find their markets abroad is about to begin from the end of March, 2003. The department of Industrial Resources held the "Committee of e-trade service provider selection" with professors of e-trade field, and selected three companies: ECplaza, EC21 and Tpage Global. The e-trade service providers combine the various technologies of on-line trades and off-line trades to support small enterprises with lack of marketing skills by intermediation of overseas buyers and production, registration of e-catalogs and offers, administration of inquiries, trade negotiations, and contract settlement. Prospective small enterprises with exports under US$ 5 million will be selected by 2005. The selected companies will be supported fully by the government, and will be provided with the services by the e-trade service providers. e-Trade service will be the most potential and successful ones in the future, which helps traders and organizations preparing for globalization.

침엽형질상으로 본 한국산 해송집단의 (海松集團) 변이

이봉수,이강영,임경빈 ( Bong Soo Lee,Kang Young Lee,Kyong Bin Yim ) 한국산림과학회 1984 한국산림과학회지 Vol.63 No.1

The attempts in this study were made to evaluate the variations in some needle characteristics of Pinus thunbergii between individual trees within population, between populations and between the hypothesized climatic districts. This species occurs naturally along 1:he southern seacoast of Korea penninsula having a relatively mild maritime climate. The followings are the summarized results. The coefficients of variation of the needle volume and needle serration density were generally higher than those of any other traits studied. The significant differences of variations of needle cross section form factor between individual trees within population at 1% level, except only the Young gwang population, were affirmed. In the case of the eastern seacoast district, where the three study populations are included, significances of variation differences were calculated, 5%r level at needle serration density and cross section area and 1% Level at needle volume. The very high significant difference of the variations of needle cross section form factor and needle longitudinal form factor were shown between population of the western seacoast district and 5% Level significance at needle volume in the southern seacoast district. The high significant differences between districts in respect to needle cross section form factor and cross section area were calculated. The Duncan`s multiple range test showed the dissimilarity of the said characteristics between the hypothesized climatic districts. Summing up the results obtained so far, individual tree and population variations were markedly noted statistically and these may be extended to the silvicultural technology.

고 분해능 안구내시경 개발을 위한 광학적 특성 평가

이봉수,조동현,김신,조효성,Lee Bongsoo,Cho Dong Hyun,Kim Sin,Cho Hyosung 한국광학회 2004 한국광학회지 Vol.15 No.5

현재 임상적으로 사용되고 있는 안구내시경은 전체 직경이 1 mm 이하로 제한되어 있고, 그 영상분해능 역시 30∼40 lp/mm로 제약되기 때문에 안구내시경 영상의 질을 판단하는데 있어서 가장 중요한 요소는 영상 분해능이라고 할 수 있다. 본 연구에서는 0.23pitch GRIN 렌즈와 5 $\mu\textrm{m}$ 이하의 마이크로 광섬유를 포함하는 미세 영상가이드를 이용한 새로운 광학적 설계로 고 분해능 안구내시경의 확대 영상을 획득하였고, USAF 분해능 target을 이용하여 기존 안구내시경 영상의 분해능과 비교, 분석하였다. An ophthalmic endoscope which is used in medical applications should have the total diameter less than 1 mm. Its image resolution is limited to 30∼40 lp/mm. Therefore, the image resolution is one of the most important factors to decide image quality of the ophthalmic endoscopic images. This study obtained high resolution and magnifying ophthalmic endoscopic images by a new optical design using a 0.23 pitch GRIN lens and high resolution fiber-optic image guide which has less than 5 ${\mu}{\textrm}{m}$ diameter microfibers. The resolutions of images from existing and from a new type of ophthalmic endoscope are measured and compared using a USAF resolution target.

제조물 책임(PL)법 개요 및 위험분석방안

이봉수,Lee, Bong-Su 대한산업안전협회 2001 안전기술 Vol.42 No.-

정밀화학공장의 재해예방

이봉수,Lee, Bong-Su 대한산업안전협회 2001 안전기술 Vol.39 No.-

탄화수소 연료 액적의 연소 특성에 관한 수치해석

이봉수,이경재,김종현,구자예,Lee, Bong-Su,Lee, Kyung-Jae,Kim, Jong-Hyun,Koo, Ja-Ye 대한기계학회 2003 大韓機械學會論文集B Vol.27 No.11

Droplet combustion at high ambient pressures is studied numerically by formulating one dimensional combustion model in the mixture of n-heptane fuel and air. The ambient pressure is supercritical conditions. The modified Soave-Redlich-Kwong state equation is used in the evaluation of thermophysical properties to account for the real gas effect on fluid p-v-T properties in high pressure conditions. Non-ideal thermodynamic and transport property at near critical and supercritical conditions are also considered. Several parametric studies are performed by changing ambient pressure and initial droplet diameter. Droplet lifetime decreased with increasing pressure. Surface temperature increased with increasing pressure. Ignition time increased with increasing initial droplet diameter. Temporal or spatial distribution of mass fraction, mass diffusivity, Lewis number, thermal conductivity, and specific heat were presented.

소방설비 유지.보수의 Bar Code 적용기법

이봉수,Lee, Bong-Su 한국화재보험협회 2000 防災와 保險 Vol.87 No.-

스파이로파이란에 의한 표면 개질 및 자외선에 의해 유도된 표면 전위에 대한 분석

이봉수,한동근,손태일,정영환,Lee, Bong-Soo,Han, Dong-Keun,Son, Tae-Il,Jung, Young-Hwan 대한화학회 2011 대한화학회지 Vol.55 No.3

스파이로파이란이 함유된 물질은 자외선의 조사(irradiation)에 의해 메로시아닌 파생물로 변화되는데 이 물질은 페놀레이트 음이온과 아민 양이온으로 구성된 쌍극성(zwitterion) 이온을 가지고 있다. 이와 같은 메로시아닌 표면위에서 페놀레이트 음이온과 니켈 금속 양이온의 복합화는 표면 전하의 변화를 일으키며, 이를 Kelvin prove force microscopy (KFM)를 이용하여 측정하였다. 자외선 노출 시간에 따라 쌍극성 이온의 발생량의 정도가 달라지고, 이것을 표면 전위를 통해서 금속 이온을 매개로 간접적으로 측정할 수 있었으며 표면 전위는 자외선 노출시간이 증가함에 따라 선형적으로 감소하다가 결국 포화상태가 됨을 관측하였다. 또한 자외선 노출 시간이 증가함에 따라 니켈 이온의 부착된 양이 증가되는 결과를 XPS 방법을 사용하여 분석할 수 있었다. 이러한 성질은 다른 금속 이온의 검출 및 양적 분석을 위해 이용될 수 있을 것으로 생각되며, 금속이온과 결합 가능한 단백질이나 세포와 같은 생체물질을 양적 변화를 표면 전하량에 따라 제어할 수 있는 가능성을 제시하였다. 지금까지의 결과를 바탕으로 고선택성, 고감도를 가지고, 생체 물질의 정량적인 제어가 가능한 지지체 혹은 바이오칩을 만들 수 있을 것으로 예상한다. Merocyanine derivatives transformed from spiropyran-containing compounds by irradiating the light of ultraviolet (UV) include zwitterion of phenolate anion and amine cation. Complexation of this phenolate anion on merocyaninemodified surface and Ni ion among metal ions led to a change of surface charge and it was measured with kelvin prove force microscopy (KFM). We found that the resultant surface potential decreased linearly as UV-exposed time increased, and finally were saturated. Also it was analyzed through XPS the immobilized amount of Ni ions was increased according to increase of UV-exposed time. It is considered that these properties could be applied for detection and a quantitative control of different metal ions. Further research is to aim construct specific scaffold/matrix which enable high selective, high sensitive and, especially, a quantitative immobilization of metal ions-binding biomaterials such as proteins and cells.

사업장 적용 주요 안전인증 규격 고찰

이봉수,Lee, Bong-Su 대한산업안전협회 2003 안전기술 Vol.61 No.-

이산화탄소 분해용 페라이트 담지 다공성 세라믹 섬유복합체 제조와 물성

이봉수,김명수,최승철,오재희,이재춘,Lee, Bong-Soo,Kim, Myung-Soo,Choi, Seung-Chul,Oh, Jae-Hee,Lee, Jae-Chun 한국세라믹학회 2002 한국세라믹학회지 Vol.39 No.8

대기중에 방출되는 이산화탄소 저감을 위해서 산소결핍 페라이트를 이용한 이산화탄소의 탄소 전환에 대한 연구가 이루어지고 있다. 본 연구에서는 우레아 분해를 이용한 균일침전법에 의해 Ni 페라이트 $Ni_{0.4}Fe_{2.6}O_4$를 다공성 세라믹섬유 지지체(지름 50mm, 두께 10mm)에 in-situ 하게 담지하였다. 페라이트를 다공성 세라믹섬유 지지체에 담지하는 방법이 이산화탄소 분해효율에 미치는 영향을 조사하였다. 페라이트가 담지된 시편으로부터 잔류 염소이온과 우레아를 제거하면 주 결정상으로 스피넬 구조의 페라이트를 얻을 수 있었으나 이산화탄소 분해효율이 크게 향상되지는 않았다. 페라이트가 중량 분율로 20% (1g) 담지된 다공성 세라믹섬유 복합체 시편의 경우, 초기 3분 까지는 100% 이산화탄소 분해효율을 나타내었으나 10분 경과 후에는 급격하게 감소하였다. 이산화탄소 분해효율 감쇄 특성시간은 약 3∼7분 사이로 나타났다. The decomposition and/or conversion of carbon dioxide to carbon have been studied using oxygen-deficient ferrites for the reduction of $CO_2$ emission to the atmosphere. In this work, the homogeneous precipitation method using urea decomposition was employed to induce in situ precipitation of Ni ferrite($Ni_{0.4}Fe_{2.6}O_4$) on the porous ceramic fiber support (50 mm diameter${\times}$10 mm thickness). Effects of ferrite loading conditions on the CO2 decomposition efficiency were discussed in this paper. Removal of residual chloride ions and urea by solvent exchange from the porous media after ferrite deposition apparently helps to form spinel ferrite, but does not increase the efficiency of $CO_2$ decomposition. Porous ceramic fiber composites containing 20 wt% (1g) ferrite samples showed 100% efficiency for $CO_2$decomposition during the first three minutes, but the efficiency decreased rapidly after the elapsed time of ten minutes. The characteristic reduction time for the $CO_2$ decomposition efficiency was estimated as about 3∼7 min.