http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이덕출 대한전기학회 1976 전기의 세계 Vol.25 No.6
근대산업의 에너지원으로서 전력수요의 급격한 증대에 수반하여 전력계통의 초고전압화, 관련기기의 소형화 및 장기간에 걸친 성능의 안정성, 신뢰성이 절실히 요망 하겠금 되었다. 이로 인하여 전기절욘재료에 요구되는 제성능도 일반적으로 고도화되고 점점 가혹한 조건이 부가되고 있는 실정이라 하겠다. 근년 고분자화학의 급속한 진보와 고분자성형기술의 발달에 의하여 등장한 합성고분자재료는 그 물리, 화학적 성질 특히 전기적 성질에 많은 특징을 가지고 있으며 그 성능이 점점 높이 평가되고 있어 고분자재료의 진출이야말로 전기기기절연의 양상에 일대 변화를 줄것이라 하여도 지나친 표현이 아니겠다. 이와같이 고분자가 전기절연재료로써의 가치는 물가구조로 부터 기대되는 우수한 유전성과 전기절연성이 높이 평가되고 있는 점이라 하겠다.
이덕출,진경시 대한전기학회 1981 전기의 세계 Vol.30 No.8
Thermally stimulated currents have been obtained from five kinds of polymer electrets. The peak current (I$_{m}$) and the peak temperature (T$_{m}$) of the TSC, particularly at PET thermoelectret, were found to depend on the forming field and the forming temperature. From these experimental results, the TSC spectra can be easily explained by the consideration of the disorientation of dipoles related with glass transition temperature. The obtained results can suggest that the forming field and the forming temperature plays an essential role for charge stability in PET thermoelectrets.ets.
이덕출 대한전기학회 1983 전기의 세계 Vol.32 No.2
본고의 내용은 다음과 같다. 1. 플라즈마 중합에 이용되는 방전 2. 플라즈마 중합반응 3. 플라즈마 중합막 성장기구 4. 플라즈마 중합법의 응용
절연재료의 표면개질을 위한 코로나 발생기의 특성에 관한 연구
이덕출,정재희,황명환,임무생 한국전기전자재료학회 1995 電氣電子材料學會誌 Vol.8 No.4
The purpose of this research is to study on characteristics of corona ignitor which was designed for ignition of plasma, used at hard coating, surface treatment and thin film preparation, at high pressure. Corona ignitor composed of hollow type inner electrode and ring type external electrode. Though corona voltage increased with increasing distance between electrodes, corona discharge can be controlled stably. The gas flow in hollow type inner electrode and the construction between electrodes affect a length of corona flame and corona phenomenon. It is possible to ignite the . plasma, usually generated at low pressure(10 Torr), at high pressure(100 Torr) by corona ignitor.
이덕출,황명환,박구범,조기선,임헌찬 한국산업안전학회 1992 한국안전학회지 Vol.7 No.2
In this thesis, the electrification phenomenon was studied by measurement of charging current and discharging current in polymers when the carriers generated by corona discharge were supplied to the surface of polymers. Corona charging current of PVC, polar and noncrystalline polymer, was larger than that of nonpolar and amorphous polymers. Corona charging current on the specimen of naked upper surface (CIM) was larger than charging current on the specimen of electrode made. Carrier injection differed from interfacial phase of polymer surface. The transfer phenomenon varied with chemical structure of polymer and then the polar effect of PVC was remarkable because of large electron affinity of Cl. In the characteristics of discharging current of PVC, the abnormal current was observed. It was supposed that this phenomena presented the trap of injected carriers in PVC and that static electricity phenomenon was generated by trap.
$M_1-P-M_2$형 접촉으로 인하여 생기는 단락전류
이덕출,D C. Lee 대한전기학회 1976 전기의 세계 Vol.25 No.1
The main purpose of this paper is to study on the transient current due to the change of environmental temperature under no external field in the arrangement of M$_{1}$(metal)-P(polyver)-M$_{2}$(metal). The specimer of polymeric insulator sandwiched by two metal electrodes composes a parallel-plate condenser represented by Maxwell-model. The behaviors of short circuit current flowing in M-P-M arrangement are very complex and the analysis of its conduction mechanism appears to be much complicated. In this paper we can suggest that a contact potential difference as an energetic state exists in the thin film specimen both sides of which are contacted by two different metals having different cook functions. Futhermore the contact potential difference appears to be constant through the course of temperature change, however, the dielectric constant and caparitance of the specimen must be temperature dependent. Accordingly the charge difference induced on both sides of electrodes may be a cause for the shory circuited transient current flowing through the external circuit. It is also suggestive that the results of the observation must be considered in cases of insulation design of electrical machines and D.C. cable for high voltage use.
플라즈마 공중합 MMA-스틸렌 박막의 전기적 특성에 관한 연구
이덕출,박구범 한국전기전자재료학회 1991 電氣電子材料學會誌 Vol.4 No.3
본 연구에서는 플라즈마공중합(메틸메타아크릴레이트 + 스틸렌) 박막의 전기적 특성을 도전전류, 고전계전기전도기구, TSC, 등의 측정을 통하여 분석하였다. 박막의 도전전류는 진공중 열처리에 의해 감소되고 아르곤 플라즈마처리 및 산화에 의해 증가 하였다. 고전계전기전도기구는 전자성전도중 공간전하제한전류형과 잘 일치하였다. 열자극전류 특성에서 두개의 피크 P$_{1}$, P$_{2}$가 관측되었으며 이는 쌍극자의 탈분극에 의한 것으로 사료되며 열처리에 의해 열자극전류는 감소하였다.
실온부근에서 진공중과 공기중 포리에티렌의 전기전도의 상이에 대하여 - 해외논문소개
이덕출 대한전기학회 1979 전기의 세계 Vol.28 No.6
이글은 일본전기학회법 45-39 Vol.90, No.4에 실린 논문이다.
이덕출 대한전기학회 1980 전기의 세계 Vol.29 No.10
본고의 내용은 다음과 같다. 1. 일렉트렉트의 정의 2. 일렉트렉트의 분류 3. 일렉트렉트의 생성기구 개요 4. 일렉트렉트의 열분석 5. 일렉트렉트의 응용