http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
내부열원을 갖는 Top-vented 원통형 밀폐공간에서의 자연대류에 관한 실험적 연구
강권호,신현규,신치범,유재석,김철,박영무,Kang, Kweon-Ho,Shin, Hyun-Kyoo,Shin, Chee-Burm,Yoo, Jai-suk,Kim, Chul,Park, Young-Moo 한국에너지학회 1996 에너지공학 Vol.5 No.2
본 연구에서는 감손우라늄칩을 처리하기 전의 시험단계로서 감손우라늄칩의 산화처리시 발생되는 산화열에 의한 산화장치 내부의 온도상승 및 외부로의 열전달을 해석하기 위해 산화장치 내부에 히터를 설치하여 실험을 수행하였다. 히터의 발생열량을 달리하면서 시간에 따른 열전달 특성을 알아내기 위하여 열유속, Nusselt 수, Grashof수와 Rayleigh 수를 구하고, Nusselt 수와 Rayleigh 수의 관계를 구하였다. An experimental study was conducted on the natural convection heat transfer with a heat source (heater) in a top-vented cylindrical enclosure. Using an Air Controlled Oxidizer (ACO) for treatment of depleted uranium chips, the heat transfer characteristics of the ACO was studied with various heat generation. Heat flux, Nusselt number, Grashof number and Rayleigh number were obtained and the relation between Nusselt number and Rayleigh number was derived.
니켈 / 철 축전지의 철전극에 관한 연구 (Ⅰ) - 철전극의 고이용률화 -
김운석,조원일,조병원,윤경석,신치범 ( Un Suk Kim,Won Il Cho,Byung Won Cho,Kyung Suk Yun,Chee Burm Shin ) 한국공업화학회 1994 공업화학 Vol.5 No.1
고성능 니켈-철 축전지를 개발하기 위하여 알칼리 축전지로 이론적 용량밀도가 높고 저공해성, 저렴한 가격, 자원의 풍부성 등의 우수한 장점을 가지고 있는 철전극에 대한 연구를 수행하였다. 충방전반응의 특성을 전위주사법, SEM, XRD분석으로 조사하였으며, 또한 전극용량을 정전류 충방전시험법으로 조사하였다. 철의 순도와 입자크기가 전극용량에 크게 영향을 미쳤으며, 첨가제 Na_2S는 전극의 부동태화를 방지하고 수소과전압을 높여 전극용량을 20% 정도 증대시켰다. 전극의 안정성과 용량은 Ni-fibrex와 foamed Ni집전체를 사용하여 증대시켰으며, 또한 소결온도에 영향을 받았다. 전극용량은 350 mAh/g(0.2 C)으로 나타났는데, 이는 이용률 36%에 해당한다. A study on the iron electrode which is a good material for alkaline battery because of its superior characteristics including high theoretical capacity density, low toxicity, low cost and inexhaustible supply was performed to develop high performance nickel-iron secondary battery. The characteristics of chrage-discharge reaction were examined by cyclic voltammetry technique, SEM and XRD analysis. The capacity of the test electrodes was determined by the costant current charge-discharge method. It was found that the purity and particle size of iron material were the major determinant factors of electrode capacity. With the addition of Na_2S into the electrolyte, the capacity of electrode was increased about 20% caused by the prevention of passivation and the increase of hydrogen overpotential. The stability and capacity of electrode were increased with the use of Ni-fibrex and foamed Ni collectors and also depended on the sintering temperature. The capacity of electrode was 350 mAh/g(0.2 C) which corresponded to 36% utility.