http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
PBG 구조를 이용한 대역통과 여파기 고조파 억제에 관한 연구
서철헌,Seo Chulhun 대한전자공학회 2004 電子工學會論文誌-TC (Telecommunications) Vol.41 No.1
A bandpass filter has been designed by employing the PBG structure and the aperture on the ground together in this paper. The harmonics of band pass filter have been suppressed by employing the PBG structure and the bandwidth of it has been broadened by using the aperture on the ground. The three kinds of PBG structures has been combined to suppress the harmonics of the filter The center frequency of filter is 2.2 GHz and the bandwidth has been increased from $40\%$ by the aperture and all harmonics were suppressed about 35dBc by the PBG. The insertion loss has been reduced 3.0dB to 2.6dB. 접지면에 PBG와 Aperture를 설치함으로써 고성능 대역통과 여파기를 설계하였다. 대역통과 여파기의 하모닉 특성은 PBG 구조에 의하여 개선되었고 대역폭은 Aperture에 의하여 확대되었다. 세가지 크기를 갖는 PBG 구조가 결합되어 새로운 PBG 구조가 도출되었다. 설계 중심 주파수는 2.2 GHz이었고 대역폭은 Aperture에 의하여 $40\%$ 확대되었다.
Aperture를 이용한 Hairpin 발진기의 위상잡음 개선에 관한 연구
서철헌 대한전자공학회 2004 電子工學會論文誌-TC (Telecommunications) Vol.41 No.8
본 논문에서는 Hairpin 발진기의 위상잡음을 개선시키기 위하여 접지 면에 Aperture를 구현하였다 Aperture를 마이크로스 트립 Hairpin 공진기에 적용함으로써 결합계수의 증가로 인해 마이크로스트립라인이 가지고 있는 Q값을 증가시켰다. 기존의 마이크로스트립 Hairpin 발진기와 비교하였을 때 Aperture를 적용한 발진기가 위상잡음을 100KHz offset에서 약 19dBc 개선시켰다. 제작된 발진기는 5.83GHz 대역이고, 출력전력은 -4.33dBm을 획득하였다. Aperture has been employed on the ground plane in the Hairpin resonator. Aperture made by etching the part of the ground effected coupling coefficient and then quality factor of Hairpin resonator has been increased. When the hair pin oscillator using aperture has been compared with the conventional hair pin oscillator using microstrip, it has been improved the phase noise about 19dBc @100KHz. Oscillation frequency of the hair pin oscillator using aperture has been 5.83GHz band and output power is -4.33dBm.
PBG 구조를 이용한 Ka Band 전력증폭기 성능개선에 관한 연구
서철헌,Seo Chulhun 대한전자공학회 2004 電子工學會論文誌-TC (Telecommunications) Vol.41 No.1
본 논문에서는 밀리미터파 대역 전력증폭기가 출력단에 PBG (photonic bandgap structure) 구조를 설치함으로써 성능개선 되었다 PBG 구조는 Ka 대역에서 저역통과 특성을 갖도록 최적화되었다. 전력증폭기의 하모닉은 PBG 구조에 의하여 억제되었고 50 GHz에서 40dBc 개선되었다 전력증폭기의 IMD와 PAE는 PBG에 의하여 기존의 전력증폭기에 비하여 각각 $15\%$와 $25\%$ 개선되었다. The performances of millimeter wave Power amplifier have been improved by using PBG (photonic bandgap structure) in this paper. The PBG structure has been optimized to obtain the lowpass characteristics in Ka band and employed at output port of Ka band power amplifier. The harmonics of the power amplifier have been suppressed by the PBG of output port and the proposed PBG has suppressed the second harmonic to 40dBc around 50 GHz. The improvements of IMD and PAE of the amplifier employing the PBG structure are obtained $15\%$ and $25\%$, compared with those of the conventional Ka band power amplifier, respectively.
Numerical Analysis of Multi-Layer Multi-Coupled Microstrip Lines
서철헌,Seo, Cheol-Heon The Acoustical Society of Korea 1994 韓國音響學會誌 Vol.13 No.e1
삼층 기판위의 삼중 결합 마이크로스트립 서로의 해석을 위한 수치해석의 일반식이 얻어졌다. 유한차분식을 얻기 위한 방법과 특이점 처리를 위한 최적의 방법이 구해졌다. 홀수 모드와 짝수 모드의 캐패시턴스와 특성 임피이던스의 수치해석 결과를 보였으며 그 결과들은 이층의 두께와 삼층의 마치크로스트립 폭의 비에 따라 구해졌다. 수치해석으로 구한 짝수 모드 캐패시턴스는 다른 수치해석 결과와 비교되었다. It is obtained the general expessions of the numerical method are applied for the TEM-mode analysis of multu-layer multi-coupled microstrip lines, In this paper, coupled microstrip are replaced by three-coupled microstrip lines in special aplications. Three-layer versions of three-coupled microstrip lines are specially attactive because of the additional flexibilities offered by three-layer configuration. This structure can be used for obtaining large capacitance and preventing coupling among microstrip lines in filter and coupler. Sappihre is chosen for anisotropic substrates material. The permittivity parallel to the optical axis is higher than the permittivity in the plane perpendicular to this axis.
서철헌,최태규 한국통신학회 2001 韓國通信學會論文誌 Vol.26 No.7
본 논문에서는 능동 배열 안테나에서 RF 대신 중간주파수를 이용하여 빔 추적을 하는 방법이 연구되었다. 안테나의 각 배열은 전압제어 발진기, 위상추적기, 혼합기와 결합되어 있으며 혼합기는 안테나 상에서 직접 RF 신호를 직접 중간주파수 신호로 변환시킨다. 전압제어 발진기 입력은 위상추적기에 의하여 조절되며 배열 안테나의 주사범위는 위상추적기와 전압제어발진기에 의하여 결정되었다.
위성통신 중간주파수 모듈용 국부발진기 누설제거에 관한 연구
서철헌,김영완,김내수,강민수 한국통신학회 2001 韓國通信學會論文誌 Vol.26 No.4
본 논문에서는 Local Oscillator(LO)의 누설신호 제거를 위해 혼합기의 특성을 이용하여 광대역의 특성을 가지고 RF 채널에 근접한 누설신호를 제거할수 있는 구조를 제안하였다. 제안된 구조는 Half-LO 주파수를 이용하는 방버븡로 LO 누설신호를 일반적인 다른 경우보다 RF 신호대역에서 멀리 떨어진 대역으로 분리시킴으로서 대역 통과여파기로서 쉽게 제거하였다. 상향변환기로서 필요한 저역통과여파기, 대역통과여파기, 그리고 증폭기를 설계하였고 혼합기에 의한 영상성분은 혼합기의 위상을 특성을 이용하여 제거하였다.