http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김헌영,김호,김중재,Kim, Heon-Young,Kim, Ho,Kim, Joong-Jae 대한기계학회 2002 大韓機械學會論文集A Vol.26 No.12
A rubber-like material model is generally characterized by hyperelasticity and formulated by a total stress-total strain relationship because the material shows nonlinear elastic behaviour under large deformation. In this study, a pressure potential obtained by a separately interpolated pressure is introduced to the non-linear finite element formulation incorporating with incompressible or almost incompressible condition of the material. The present formulation is somewhat different from the general formulation using the pressure computed in the displacement field. A non-linear finite element analysis program is developed for the plane strain and the axisymmetric contact problems of a rubber-like material. Various examples with rubber material are analyzed for its verification. The results about deformed shapes and stress distributions thought to be meaningful in comparison with a commercial program, MARC.
김헌영,최종길,김정민,이강욱,여태정,Kim, Heon-Young,Choi, Jong-Gil,Kim, Jung-Min,Lee, Kang-Wook,Yeo, Tae-Jung 한국자동차공학회 2007 한국 자동차공학회논문집 Vol.15 No.3
Numerical analyses are carried out to evaluate the cumulative impact damage of an automotive front end bumper under the low speed crash events(CMVSS215) by using explicit code. Results of first impact simulation, which are deformed shape, thickness, stress tensors and strain tensors, are used as the initial conditions for a next impact simulation. Between the events, the residual vibration is damped out by using nodal damping, and then recovery after each event is evaluated by several methods, one of which is a springback analysis with implicite finite element analysis code. The coupled analysis scheme for the evaluation of cumulative impact damage is verified through the comparison with test results.
김헌영,한재형,이종근,Kim, Heon-Youog,Han, Jae-Hyung,Lee, Jong-Keun 한국철도학회 1999 한국철도학회논문집 Vol.2 No.1
The purpose of this study is to suggest the effective analytical procedure using finite element model for the crashworthiness of motorized trailer of high speed train. The static crush of rectangular section frame is analyzed by experiment and numerical simulation. The equivalent thickness distribution of the aluminum frame ensuring the same energy absorption as the steel frame is obtained. In the analysis of end-on collision of TGV-K, deformed pattern and section forces are obtained, and the effect of crushable zone are examined. The numerical results are applied to the design of motorized trailer of Korean high speed train.
단일 모드 광섬유의 굽힘손실을 이용한 다점 측정 센서 시스템
김헌영,김대현,Kim, Heon-Young,Kim, Dae-Hyun 한국비파괴검사학회 2015 한국비파괴검사학회지 Vol.15 No.1
지능형 센서 기반의 구조 건전성 감시를 통해 안전성을 확보하기 위한 연구는 우주항공을 비롯하여 기계/토목 구조물, 수송 기계 분야로 확대되었다. 특히, 실시간으로 운용되는 구조물은 사고로 인한 재산 및 인명 피해를 예방하기 위해 여러 스마트 센서 기반의 구조 건전성 감시 기술이 요구되는 결과로 이어졌다. 한편, 상용화되어 있는 대부분의 센서는 전자기 기반의 센서로써 전자기 간섭 및 부식과 같은 적용성의 제한과 환경적 요인에 취약할 수 있다. 따라서, 전자기 기반 센서의 단점을 보완하기 위한 신개념 센서로 광섬유 센서가 최근 각광을 받고 있다. 하지만, 광섬유 센서를 이용한 실제 구조물의 감시를 위해서는 고가 장비와 시스템이 요구되어 어려움이 존재한다. 따라서, 본 연구에서는 한 가닥의 광섬유를 이용하여 여러 지점에서 발생할 수 있는 충격을 검출하는 센서 시스템을 제안하였다. 이를 위해, 광섬유 굽힘 손실 현상을 이용하여 같은 충격에 대해 위치별 광 강도의 변화량 차이가 존재하도록 센서부의 모듈을 제작하였다. 그리고, 광 강도 변화에 영향을 미치는 변수들을 이용하여 실험 설계를 하였으며, 충격 위치 검출이 가능함을 실험적으로 검증하였다. Applications of smart sensors have been extended to safety systems in the aerospace, transportation and civil engineering fields. In particular, structural health monitoring techniques using smart sensors have gradually become necessary and have been developed to prevent dangers to human life and damage to assets. Generally, smart sensors are based on electro-magnets and have several weaknesses, including electro-magnetic interference and distortion. Therefore, fiber optic sensors are an outstanding alternative to overcome the weaknesses of electro-magnetic sensors. However, they require expensive devices and complex systems. This paper proposes a new, affordable and simple sensor system that uses a single fiber to monitor pressures at multiple-points. Moreover, a prototype of the sensor system was manufactured and tested for a feasibility study. Based on the results of this experimental test, a relationship was carefully observed between the bend loss conditions and light-intensity. As a result, it was shown that impacts at multiple-points could be monitored.
연료전지 스택의 기밀성 향상을 위한 가스켓 모델링과 해석 기법
김헌영(Kim, Heon-Young),김정민(Kim, Jung-Min),김대영(Kim, Dae-Young),서정도(Suh, Jung-Do),양유창(Yang, Yoo-Chang),임철호(Im, Cheol-Ho) 한국신재생에너지학회 2007 한국신재생에너지학회 학술대회논문집 Vol.2007 No.06
Fuel Cell Stack performance, which is influenced by the maintenance of a constant internal environment, requires high levels of air tightness. Used for analysis, gasket for fuel cell is made of elastic rubber materials and placed over separator, and shape of deformation of a gasket affects the transformation separator and airtightness while fastening structure. Separator as made of steel sheet isn't broken under pressure but can affect gas and cool water flow by the plastic deformation process. Therefore, it is understood that assembly process is well developed in case distribution of stress and shape of deformation is shown uniformly. This study is conducted on the assumption that a fuel cell maintenance is advantageous in that conditions. In this paper, analyses of unit cell and partial model were performed and distribution of stress and shape of deformation of Gasket and separator were analyzed to evaluate the airtightness while fastening structure.
김헌영(Heonyoung Kim),김형종(Hyungjong Kim),김호(Ho Kim),이종강(Jongkang Lee),김도형(Dohyung Kim) 한국자동차공학회 2004 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-
FEM analysis is commonly used in design process of automotive industry. In the area of rubber product, application of FEM tools is also authorized in their usefulness, but only with experimental method than any other material. The importance of comparing analysis and experimental result in design process has been grown because of so many existing variance of rubber. Door-Seal has no exception or has more connection with the comparing work on reaction force, contact time, contact area, deformed shape even though this work should be done by manually and takes some times. The Door-Seal evaluation system is developed by this requirement with image processing method and documentation.